Rabbet Cutter | Ø 125 mm | WM
Steel rabbet cutter with 2 cutting edges made of hard metal Continue
excl. sales tax , without shipping costs
incl. % tax , without shipping costs
Description
For jointing, rebating and flush moulding with guide ring. Steel moulding tool, burnished surface
For manual feed, chip thickness limited, low kickback.
For jointing, rebating and flush moulding with guide ring. Made of steel, Bronzed surface.
Fitted with HW exchangeable main cutters and pre-cutters (RB-HW).
For manual feeding, thickness limiter, low kick-back.
Quality of the cutting edges
HW = tungsten carbide (old designation HM)
HS = high-alloy high-speed steel (high-performance steel)
SP = alloy tool steel (special steel)
Abbreviations
WM = Reversible knife (can be used on both sides)
PM = Profile knife
Technical information
Bore Diameter [mm] | 30 |
Cutter Quality | HW |
Diameter [mm] | 125 |
Rip Capacity [mm] | 50 |
Shaping Depth [mm] | 26 |
WM Main Cutters [pcs] | 2 |
WM Spurs [pcs] | 4 |
Width [mm] | 50 |
Downloads
- Technical Drawing (PDF | 157.87 KB)
This might also be of interest to you
Reversible Blade | HW | Width 12 mm | Clearance angle 35 °
04.0.119 | Length 50 mm
2 cutting edges., Tungsten carbide
continue readingexcl. sales tax , without shipping costs
incl. % tax , without shipping costs
Reversible Spurs | Width 14 mm | Length 14 mm
04.0.003 | Thickness of 2.0 mm
Suitable for Felder and Hammer adjustable groover and elder grooving cutter.
continue readingexcl. sales tax , without shipping costs
incl. % tax , without shipping costs