Extraction

Matches all dust extraction equipment from FELDER®.

Galvanised steel pipe clamp with sound insulation lining for wall mounting extraction pipes

Sealed electro-pneumatic gate valve to be mounted on flared pipes

90° elbows, flanged on both sides for suction hoses with Ø 80 mm to Ø 350 mm

45° branches, flanged on all sides, with a diameter of 80 mm - 350 mm.

Simple manual gate valve with locking screw

45° elbows, flanged on both sides for suction hoses with Ø 80 mm to Ø 350 mm

Galvanised steel pipe cover for flared pipes.

Rolling carriage for Felder dust extractors

• Max. air flow rate: 1,118 cfm (1,900 m³/h)
•  
• Nominal air flow rate: 65 ft/sec (20 m/sek), 529 cfm (900 m³/h)
• Vacuum: 2,350 Pa
• Filter (surface) area: 54 ft² (5 m²)
• Extraction port diameter: 5" (125 mm)
• Remaining dust concentration, left-over dust content: < 0.1 mg/m³

• Max. air flow rate: 1471 cfm (2,500 m³/h)
• Nominal air flow rate: 65 ft/sec (20 m/sek), 652 cfm (1,108 m³/h)
• Vacuum: 2,200 Pa
• Filter (surface) area: 108 ft² (10 m²)
• Extraction port diameter: 5½" (140 mm)
• Remaining dust concentration, left-over dust content: < 0.1 mg/m³

• Max. air flow rate: 1,883 cfm (3,200 m³/h)
• Nominal air flow rate: 65 ft/sec (20 m/sek), 853 cfm (1,450 m³/h)
• Vacuum: 2,200 Pa
• Filter (surface) area: 108 ft² (10 m²)
• Extraction port diameter: 6¼" (160 mm)
• Remaining dust concentration, left-over dust content: < 0.1 mg/m³