HW-WM Adjustable Slot Cutter | Ø 250 mm
Silent-POWER® For professional shaping results at an affordable Industry quality; Roll neck milling - only in conbination with 04.3.036 . Continue
excl. sales tax , without shipping costs
incl. % tax , without shipping costs
Description
Tenon routing - only in combination with 04.3.036
Adjustment with set of shims (0.1 mm increments)
Steel moulding tool, surface burnished
For manual feed, chip thickness limited, low kickback
For manual feeding, thickness limiter, low kick-back
● HW (Tungsten carbide) Insert carbide knives increase tool life by up to 20X.
Fitted with HW exchangeable main cutters and pre-cutters (RB-HW).
| Silent-POWER ... Precision tool |
Industrial carbide ... Highest cutting quality | |
Exceptional quality ... Extremely long tool life | |
Durable ... Solid and precise |
Quality of the cutting edges
HW = tungsten carbide (old designation HM)
HS = high-alloy high-speed steel (high-performance steel)
SP = alloy tool steel (special steel)
Abbreviations
WM = Reversible knife (can be used on both sides)
PM = Profile knife
Technical information
Bore Diameter [mm] | 30 |
Cutter Quality | HW |
Diameter [mm] | 250 |
Shaping Depth [mm] | 80 |
Rip Capacity [mm] | 8,0-15 |
WM Main Cutters [pcs] | 4 |
WM Spurs [pcs] | 4 |
Downloads
- Technical Drawing (PDF | 157.03 KB)
Set-offer available
This might also be of interest to you
Set of shims for slot cutter with 6 auxiliary holes
04.3.036 | ø 30 mm
Felder Set of shims for extended width of slots and tenons
continue readingexcl. sales tax , without shipping costs
incl. % tax , without shipping costs
Tenoning Hood
430-123 | for Felder Series 500/700
Cover for Felder shapers
continue readingexcl. sales tax , without shipping costs
incl. % tax , without shipping costs
Tenoning Hood
430-124 | for Felder Series 900 / Format4 profil 45
Cover for Felder shapers
continue readingexcl. sales tax , without shipping costs
incl. % tax , without shipping costs
Tenoning Plate
430-620 | for all "X-Roll" format sliding tables with Felder Series 500/700
The aluminium plate can be used on both sides: for right angled as well as slot and tenon joints
continue readingexcl. sales tax , without shipping costs
incl. % tax , without shipping costs
Tenoning Plate
503-114 | for Hammer sliding table
The aluminium plate can be used on both sides: for right angled as well as slot and tenon joints
continue readingexcl. sales tax , without shipping costs
incl. % tax , without shipping costs
Reversible Blade | Width 12 mm
04.0.190 | Length 7.65 mm | 2 pieces
2 cutting edges., Tungsten carbide
continue readingexcl. sales tax , without shipping costs
incl. % tax , without shipping costs