Counter Profile Cutter | Ø 132 mm | PM
Aluminium counter profile cutter, equipped with profile A Continue
excl. sales tax , without shipping costs
incl. % tax , without shipping costs
Description
Counter profile cutter for interior doors
for counter profiling furniture and interior doors in hard and soft wood. Wood thickness variable: counter profile on one side 22-30 mm, on both sides 37-48 mm. For manual feed, chip thickness limited, low kickback.
1 tool - 5 possible profiles!
Equipped with HW reversible main cutters, profile A.
Scope of delivery:
- Counter profile cutter, profile A1, WP-HW, Ø = 132 mm, W = 16.5 mm, ø = 30 mm, Z 2 aluminium moulding tool, surface hard anodised
- Counter profile auxiliary cutter, Profile A2, WP-HW, Ø = 132 mm, W = 16.5 mm, ø = 30 mm, Z 2 aluminium moulding tool, surface hard anodised
- Adjustable groove cutter, WPL-HW, Ø = 132 mm, B = 8.0-15.0 mm (adjustable with set of shims), ø = 30 mm, Z 4, V 4 steel moulding cutter, surface burnished
- Set of shims counter profile cutter
- Set of shims adjustable groove cutter
Extended range of applications:
- Profile B1 (500-04-08521)
- Profile B2 (500-04-08522)
- Profile C1 (500-04-08531)
- Profile C2 (500-04-08532)
- Profile D1 (500-04-08541)
- Profile D2 (500-04-08542)
- Profile E1 (500-04-08551)
- Profile E2 (500-04-08552)
Quality of the cutting edges
HW = tungsten carbide (old designation HM)
HS = high-alloy high-speed steel (high-performance steel)
SP = alloy tool steel (special steel)
Abbreviations
WM = Reversible knife (can be used on both sides)
PM = Profile knife
Technical information
Bore Diameter [mm] | 30 |
Cutter Quality | HW |
Diameter [mm] | 132 |
Shaping Depth [mm] | 16 |
Rip Capacity [mm] | 37-48 |
Downloads
- Technical Drawing (PDF | 512.57 KB)
This might also be of interest to you
Clamping Device for Counter Profile Shaping
01.0.019
For exact and fast end grain profiling
continue readingexcl. sales tax , without shipping costs
incl. % tax , without shipping costs
Replacement Knives
500-04-08552 | Profile E2
Suitable for Hammer Door Counter Profile Cutter Heads 500-04-085.
continue readingexcl. sales tax , without shipping costs
incl. % tax , without shipping costs
Replacement Knives
500-04-08551 | Profile E1
Suitable for Hammer Door Counter Profile Cutter Heads.
continue readingexcl. sales tax , without shipping costs
incl. % tax , without shipping costs
Set of shims for counter profile cutter 500-04-085
501-04-030
Suitable for Hammer Counter profile cutterblock.
continue readingexcl. sales tax , without shipping costs
incl. % tax , without shipping costs
Reversible Blade | Width 12 mm
04.0.190 | Length 7.65 mm | 2 pieces
2 cutting edges., Tungsten carbide
continue readingexcl. sales tax , without shipping costs
incl. % tax , without shipping costs