Board Cutter Set | 5 profiles possible with extension cutters
Production of tongue and groove boards with open or closed V-joints, smooth shuttering boards, floorboards. Continue
excl. sales tax , without shipping costs
incl. % tax , without shipping costs
Description
For manual feeding, thickness limiter, low kick-back. |
production of “tongue and groove boards” with open or closed “V-joints”, shutters, floorboards. |
(1) | Rebate Cutter, RB-HW, Dia. = 143 mm, W = 20,0 mm, ø = 50 mm, Z 2, V 2 |
(2) | Grooving cutter, RB-HW, Dia. = 160 mm, W = 6,0 mm, ø = 50 mm, Z 4, V 4 |
(3) | Rebate Cutter, RB-HW, Dia. = 142 mm, W = 20,0 mm, ø = 50 mm, Z 2, V 2 |
(4) | Beveling Cutter, DB-HW, a = 30°, Dia. = 158 mm, W = 20 mm, ø = 50 mm, Z 2, V 2 |
(I) | Set of Shims |
(II) | Shim Holder ø = 50 mm, for moulder spindles-ø = 30 mm |
(III) | Cover ring for the set coupling |
Additional Boarding Profiles |
(5) | Supplementary Cutter "Joint and chamfer cutter for closed joints", Order No., 04.3.132 |
(6) | Supplementary Cutter "Joint and chamfer cutter for open joints", Order No., 04.3.133 |
(7) | Supplementary Cutter “Softline”, Order No. 04.3.131 |
| Silent-POWER ... Precision tool |
Industrial carbide ... Highest cutting quality | |
Exceptional quality ... Extremely long tool life | |
Durable ... Solid and precise |
Quality of the cutting edges
HW = tungsten carbide (old designation HM)
HS = high-alloy high-speed steel (high-performance steel)
SP = alloy tool steel (special steel)
Abbreviations
WM = Reversible knife (can be used on both sides)
PM = Profile knife
Technical information
Bore Diameter [mm] | 30 |
Cutter Quality | HW |
Rip Capacity [mm] | 10-40 |
Downloads
- Technical Drawing (PDF | 1.07 MB)
This might also be of interest to you
Supplementary Cutter
04.3.132 | for closed joint
continue readingexcl. sales tax , without shipping costs
incl. % tax , without shipping costs
Supplementary Cutter
04.3.133 | for open joint
continue readingexcl. sales tax , without shipping costs
incl. % tax , without shipping costs
Additional Softline Cutter
04.3.131 | for Softline
continue readingexcl. sales tax , without shipping costs
incl. % tax , without shipping costs
Reversible Blade | HW | Width 12 mm | Clearance angle 35 °
04.0.161 | Length 20 mm
2 cutting edges., Tungsten carbide
continue readingexcl. sales tax , without shipping costs
incl. % tax , without shipping costs
Reversible Spurs | Width 14 mm | Length 14 mm
04.0.003 | Thickness of 2.0 mm
Suitable for Felder and Hammer adjustable groover and elder grooving cutter.
continue readingexcl. sales tax , without shipping costs
incl. % tax , without shipping costs
4-fold Main Cutters WPL | Width 18 mm | Length 18 mm
04.1.175 | Thickness of 2,95 mm
Suitable for Felder adjustable groover 04.0.189+, Hammer adjustable groover 500-04-009, Felder grooving cutter 04.1.170+.
continue readingexcl. sales tax , without shipping costs
incl. % tax , without shipping costs