Board Cutter Set | 3 profiles
Production of tongue and groove boards with open or closed "V-joint", smooth shuttering boards, floor boards in a practical storage case Continue
excl. sales tax , without shipping costs
incl. % tax , without shipping costs
Description
For manual feed, chip thickness limited, low kickback
1 tool - 3 profiles!
Wood thickness variable from 12-40 mm. Main cutters and spurs made of tungsten carbide.
Production of tongue and groove boards with open or closed "V-joint", smooth shuttering boards, floorboards.
SET consisting of:
- Rabbet cutter, WPL-HW, Ø = 123 mm, W = 20.2 mm, ø = 30 mm, Z 2, V 4 aluminium moulding tool, hard anodised surface
- Rabbet cutter, WPL-HW, Ø = 138 mm, W = 4.0-7.5 mm, ø = 30 mm, Z 4, V 4 steel moulding tool, burnished surface
- Rabbet cutter, WPL-HW, Ø = 122 mm, W = 36.4 mm, ø = 30 mm, Z 4, V 4 aluminium moulding cutter, hard anodised surface
- Bevel cutter, WP-HW, a = 30°, Ø = 138 mm, W = 20.0 mm, ø = 30 mm, Z 2, V 2 aluminium moulding cutter, hard anodised surface (can be used as an extension to the profile R = 4 mm (order no. 500-04-0862)).
Quality of the cutting edges
HW = tungsten carbide (old designation HM)
HS = high-alloy high-speed steel (high-performance steel)
SP = alloy tool steel (special steel)
Abbreviations
WM = Reversible knife (can be used on both sides)
PM = Profile knife
Technical information
Bore Diameter [mm] | 30 |
Cutter Quality | HW |
Rip Capacity [mm] | 12-40 |
Downloads
- Technical Drawing (PDF | 884.77 KB)
This might also be of interest to you
Reversible Blade | HW | Width 12 mm | Clearance angle 35 °
04.0.161 | Length 20 mm
2 cutting edges., Tungsten carbide
continue readingexcl. sales tax , without shipping costs
incl. % tax , without shipping costs
Reversible Spurs | Width 14 mm | Length 14 mm
04.0.003 | Thickness of 2.0 mm
Suitable for Felder and Hammer adjustable groover and elder grooving cutter.
continue readingexcl. sales tax , without shipping costs
incl. % tax , without shipping costs
4-fold Main Cutters WPL | Width 18 mm | Length 18 mm
04.0.192 | Thickness of 1.95 mm
Suitable for Felder adjustable groover 04.0.189+, Hammer adjustable groover 500-04-009, Felder grooving cutter 04.1.170+.
continue readingexcl. sales tax , without shipping costs
incl. % tax , without shipping costs
Reversible Spurs | Width 14 mm | Length 14 mm
04.1.003 | Thickness of 1.2 mm
Suitable for FELDER® and HAMMER® adjustable groover 04.0.189.50 / 500-04-009, FELDER® grooving cutter 04.1.170.50.
continue readingexcl. sales tax , without shipping costs
incl. % tax , without shipping costs
4-fold Main Cutters WPL | Width 18 mm | Length 18 mm
04.1.175 | Thickness of 2,95 mm
Suitable for Felder adjustable groover 04.0.189+, Hammer adjustable groover 500-04-009, Felder grooving cutter 04.1.170+.
continue readingexcl. sales tax , without shipping costs
incl. % tax , without shipping costs