Supplementary Cutter | WM
Supplementary cutter made of steel, suitable for 04.0.189 Continue
excl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Description
Supplementary cutter for the adjustable groove cutter 04.0.189 for groove depths up to 15.4 mm.
Steel moulding tool, surface burnished. For manual feed, chip thickness limited, low kickback.
Quality of the cutting edges
HW = tungsten carbide (old designation HM)
HS = high-alloy high-speed steel (high-performance steel)
SP = alloy tool steel (special steel)
Abbreviations
WM = Reversible knife (can be used on both sides)
PM = Profile knife
Technical information
Bore Diameter [mm] | 30 |
Cutter Quality | HW |
Diameter [mm] | 180 |
Moulding Depth [mm] | 32 |
Rip Capacity [mm] | 7,5 |
Type | Supplementary Cutter |
WM Main Cutters [pcs] | 2 |
Downloads
- Technical Drawing (PDF | 163.71 KB)
Matching articles
Adjustable Groove Cutter | WM
04.0.189 | Adjustment range: 4.0-7.5 mm | Ø 180 mm
Adjustable groove cutter for moulding grooves
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Ringset for Adjustable Groover
04.3.035
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Set-offer available
SET: carbide adjusting cutter 2 parts and extension cutter
.SET-WA12-6
continue readingThis might also be of interest to you
Reversible Blade | Width 12 mm
04.0.190 | Length 7.65 mm | 2 pieces
With 2 cutting edges made of tungsten carbide
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Adjustable Groove Cutter | WM
04.0.189 | Adjustment range: 4.0-7.5 mm | Ø 180 mm
Adjustable groove cutter for moulding grooves
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Reversible Blade | Width 12 mm
04.0.190.10 | Length 7.65 mm | 10 pieces
With 2 cutting edges made of tungsten carbide
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs