Adjustable Groove Cutter | WM
Adjustable groove cutter for moulding grooves Continue
excl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Description
Groove moulding for different tenons, back panels, cabinet corner joints, moulding fittings, veneer work, settings for jewellery (brass, stone, plastics). Steel moulding tool, surface burnished, adjustment with set of shims. Equipped with HW reversible main cutters and HW reversible spurs. For manual feed, limited chip thickness, low kickback.
Quality of the cutting edges
HW = tungsten carbide (old designation HM)
HS = high-alloy high-speed steel (high-performance steel)
SP = alloy tool steel (special steel)
Abbreviations
WM = Reversible knife (can be used on both sides)
PM = Profile knife
Technical information
Bore Diameter [mm] | 30 |
Cutter Quality | HW |
Diameter [mm] | 180 |
Moulding Depth [mm] | 32 |
Rip Capacity [mm] | 4,0-7,5 |
Type | Adjustable Groove Cutter |
WM Main Cutters [pcs] | 8 |
WM Spurs [pcs] | 4 |
Downloads
- Technical Drawing (PDF | 163.71 KB)
Matching articles
Supplementary Cutter | WM
04.1.189 | Adjustment range: 7.5 mm | Ø 180 mm
Supplementary cutter made of steel, suitable for 04.0.189
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Ringset for Adjustable Groover
04.3.035
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Set-offer available
SET: carbide adjusting cutter 2 parts and extension cutter
.SET-WA12-6
continue readingThis might also be of interest to you
4-fold Main Cutters WPL | Width 18 mm | Length 18 mm
04.0.192 | Thickness of 1.95 mm
Replacement cutters for Silent Power Felder Group moulding tools
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Reversible Spurs | Width 14 mm | Length 14 mm
04.1.003 | Thickness of 1.2 mm
Replacement cutters for Silent Power Felder Group moulding tools
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Supplementary Cutter | WM
04.1.189 | Adjustment range: 7.5 mm | Ø 180 mm
Supplementary cutter made of steel, suitable for 04.0.189
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs