Power feeders

For operating safety and comfort: Power feeders from the Felder Group

The constant feed rate, the high quality rubber rollers and the exact positioning of the workpiece by a power feeder guarantees clean and consistently precise work results for every application. Recommended application: Standard and production work on the spindle moulder or edge sander, planing, trimming and parallel cutting – a power feeder turns your circular saw into a panel sizing saw. On power feeders with an advanced tilting head (Variofeed 3/4, F48), narrow workpieces can be pressed against the fence by turning the head by 90 degrees.

7 Machines found
FELDER
Variofeed 4
  • 4 driven rollers
  • Advanced tilting head
  • Infeed speed: 10–60 ft/min (3–18 m/min)
  • Weight: 154 lb (70 kg)
FELDER
F-48
  • 4 driven rollers
  • Advanced tilting head
  • Infeed speed: 11.5/13/21.3/26.3/32.8/41/65.5/82 ft/min (3.5/4/6.5/8/10/12.5/20/25 m/min)
  • Weight: 147 lb (67 kg)
FELDER
Variofeed 3
  • 3 driven rollers
  • Advanced tilting head
  • Infeed speed: 10–60 ft/min (3–18 m/min)
  • Weight: 143 lb (65 kg)
FELDER
F-38
  • 3 driven rollers
  • With basic tilting head
  • Infeed speed: 10.5/20.6/27.2/41/54.8/82/105/206.7 ft/min (3.2/6.3/8.3/12.5/16.7/25/32/63 m/min)
  • Weight: 130 lb (59 kg)
FELDER
S308
  • 3 driven rollers
  • With basic tilting head
  • Infeed speed: 10.5/20.7/27.2/41/54.8/82/105.9/206.7 ft/min (3,2/6,3/8,3/12,5/16,7/25/32/63 m/min)
  • Weight: 90 lb (41 kg)
Hammer
H32
  • 3 driven rollers
  • With basic tilting head
  • Infeed speed: 11/23/26.2/49.2 ft/min (3,4/7/8/15 m/min)
  • Weight: 70 lb (32 kg)
Hammer
HC32
  • 3 driven rollers
  • With basic tilting head
  • Infeed speed: 19.7/26.2/32.8/42.7 ft/min (6/8/10/13 m/min)
  • Weight: 70 lb (32 kg)