HW-WM Adjustable Slot Cutter | Ø 250 mm
Adjustable slot cutter made of steel for tongue and grooving of corner joints Continue
excl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Description
Tenon routing - only in combination with 04.3.036
Adjustment with set of shims (0.1 mm increments)
Steel moulding tool, surface burnished
For manual feed, chip thickness limited, low kickback
Quality of the cutting edges
HW = tungsten carbide (old designation HM)
HS = high-alloy high-speed steel (high-performance steel)
SP = alloy tool steel (special steel)
Abbreviations
WM = Reversible knife (can be used on both sides)
PM = Profile knife
Technical information
Bore Diameter [mm] | 30 |
Cutter Quality | HW |
Diameter [mm] | 250 |
Moulding Depth [mm] | 80 |
Rip Capacity [mm] | 8,0-15 |
WM Main Cutters [pcs] | 4 |
WM Spurs [pcs] | 4 |
Downloads
- Technical Drawing (PDF | 157.03 KB)
Set-offer available
This might also be of interest to you
Set of shims for slot cutter with 6 auxiliary holes
04.3.036 | ø 30 mm
Felder Set of shims for extended width of slots and tenons
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Tenoning Hood
430-123 | for Felder Series 500/700
Cover for Felder spindle moulders
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Tenoning Hood
430-124 | for Felder Series 900 / Format4 profil 45
Cover for Felder spindle moulders
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Tenoning Plate
430-620 | for all "X-Roll" format sliding tables with Felder Series 500/700
The aluminium plate can be used on both sides: for right angled as well as slot and tenon joints
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Tenoning Plate
503-114 | for Hammer sliding table
The aluminium plate can be used on both sides: for right angled as well as slot and tenon joints
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Reversible Blade | Width 12 mm
04.0.190 | Length 7.65 mm | 2 pieces
With 2 cutting edges made of tungsten carbide
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs