HW-WM Adjustable Slot Cutter | Ø 200 mm
Adjustable slot cutter made of steel for tongue and grooving of corner joints Continue
excl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Description
Tenon routing - only in combination with 04.3.036
Adjustment with set of shims (0.1 mm increments)
Steel moulding tool, surface burnished
For manual feed, chip thickness limited, low kickback
Quality of the cutting edges
HW = tungsten carbide (old designation HM)
HS = high-alloy high-speed steel (high-performance steel)
SP = alloy tool steel (special steel)
Abbreviations
WM = Reversible knife (can be used on both sides)
PM = Profile knife
Technical information
Bore Diameter [mm] | 30 |
Cutter Quality | HW |
Diameter [mm] | 200 |
Moulding Depth [mm] | 65 |
Rip Capacity [mm] | 8,0-15 |
WM Main Cutters [pcs] | 4 |
WM Spurs [pcs] | 4 |
Downloads
- Technical Drawing (PDF | 159.28 KB)
This might also be of interest to you
Reversible Blade | Width 12 mm
04.0.190 | Length 7.65 mm | 2 pieces
With 2 cutting edges made of tungsten carbide
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Reversible Spurs | Width 14 mm | Length 14 mm
04.0.003 | Thickness of 2.0 mm
Replacement cutters for Silent Power Felder Group moulding tools
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Set of shims for slot cutter with 6 auxiliary holes
04.3.036 | ø 30 mm
Felder Set of shims for extended width of slots and tenons
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Reversible Blade | Width 12 mm
04.0.190.10 | Length 7.65 mm | 10 pieces
With 2 cutting edges made of tungsten carbide
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs