Adjustable Groove Cutter | Ø 160 mm
Permanently mounted steel groove cutter with threaded steel bush for moulding grooves Continue
excl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Description
Clean grooves with any groove width
HW-tipped, 4 straight raking cutters, 4 interworking spurs. 2-part, adjustment with set of shims. Steel moulding tool, bronzed surface. For manual feed, limited chip thickness, low kickback.
Quality of the cutting edges
HW = tungsten carbide (old designation HM)
HS = high-alloy high-speed steel (high-performance steel)
SP = alloy tool steel (special steel)
Abbreviations
WM = Reversible knife (can be used on both sides)
PM = Profile knife
Technical information
Bore Diameter [mm] | 30 |
Cutter Quality | HW |
Diameter [mm] | 160 |
Moulding Depth [mm] | 35 |
Rip Capacity [mm] | 4-7,5 |
Tooth Count [pcs] | 4/4 |
Type | Adjustable Groove Cutter |
WM Main Cutters [pcs] | 4 |
WM Spurs [pcs] | 4 |
Downloads
- Technical Drawing (PDF | 160.78 KB)
Matching articles
HW Supplementary Cutter | Ø 160 mm
04.2.190 | Adjustment range: +6.0 mm
Permanently mounted supplementary cutter made of steel, suitable for 04.2.099
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Set-offer available
HW Adjustable Groove Cutter Set | Ø 160 mm
04.3.099 | Adjustment range: 4.0-13.5 mm
Permanently mounted adjustable groove cutter set made of steel consisting of 04.2.099 and 04.2.190 for moulding grooves
continue readingSilent-Power® Tool Starter Set
400-107
The Silent-Power® tool starter set contains all necessary tools for perfect moulding and cutting results
continue readingThis might also be of interest to you
HW Supplementary Cutter | Ø 160 mm
04.2.190 | Adjustment range: +6.0 mm
Permanently mounted supplementary cutter made of steel, suitable for 04.2.099
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs