Table saw Hammer K2M

The Hammer K2M is a compact panel saw. What characterises this machine in particular is that it does not come with a sliding table. Therefore, its dimensions are very compact. The machine is equipped with a T-slot on both sides of the saw blade for cutting to length and mitre cuts. The mitre fence 423-043 can be inserted into this T-slot.

The Hammer saw aggregate impresses with smoothness, precision and extreme user friendliness. The large cutting height of 80 mm leaves nothing to be desired. Saw blades with up to 254 mm diameter can be lowered completely below the level of the saw table. The saw blade is simple to access and can be changed with ease.

Every Hammer panel saw can be configured at the factory for the use of special adjustable dado tools. The dado tool can be fitted to the saw arbour and makes it possible to make various width grooves, tenons and slots of between 8 and 19.5 mm in width.

The continuously variable tilt range between 0° and 45° ensures precise mitre cuts. End stops at the 0° and 45° position ensure exact positioning of the settings. A large scale allows precise positioning and easy read-out of the corresponding values. Both the height adjustment and the angle adjustment can be done directly from the operator's side. The scope of delivery includes 1 handwheel.

The cutting width on the saw table can be adjusted continuously between 0 and 610 mm (optionally 0-1220 mm). Thanks to the integrated scale in the guide rail, the aluminium fence can be precisely set to the desired position. When carrying out angled cuts with a tilted saw blade it is possible to move the fence from the horizontal to the flat position. The narrow fence edge then enables the rip cutting of very thin workpieces.