Schleiffix Set | Ø 45, 60, 80 mm
Felder professional aluminium sanding cylinder for sanding with the spindle moulder Continue
excl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Description
The solid aluminium sanding wheel guarantees exact sanding of workpiece edges, curves and bows. Thanks to the option of using continuous sanding paper increases the efficiency of the sanding cylinder. The mounting bore for moulder spindles is ø 30 mm.
"Very fine" granulation(280-1200) - For the re-sanding watered, primed and painted surfaces
"Fine" granulation (150-240) - For the fine sanding of raw wood surfaces
"Medium" granulation (70-120) - For the coarse pre-sanding of raw wood surfaces
"Coarse" granulation (30-60) - To remove layers of glue and paint
Technical information
Bore Diameter [mm] | 30 |
Height [mm] | 110 |
Set includes
Felder Schleiffix
423-028 | Ø 45 mm
With eccentric clamping to fasten continuous sanding paper, precise sanding of workpiece edges, curves and bends
continue readingFelder Schleiffix
423-029 | Ø 60 mm
With eccentric clamping to fasten continuous sanding paper, precise sanding of workpiece edges, curves and bends
continue readingFelder Schleiffix
423-030 | Ø 80 mm
With eccentric clamping to fasten continuous sanding paper, precise sanding of workpiece edges, curves and bends
continue readingThis might also be of interest to you
Clamping Cap for Moulder Spindles
500-136
Clamping cap for Hammer spindle moulders to extend the maximum clamping length
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Roll of Sandpaper 110 mm wide
09.1.041 | coarser grit K80
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Roll of Sandpaper 110 mm wide
09.1.042 | medium grit K100
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Roll of Sandpaper 110 mm wide
09.1.043 | medium fine grit K120
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Table Extension with Roller Support
14.0.950
Pull-out table extension with roller block for Felder FS 900
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Additional sanding table with below table extraction |
14.0.951
Sanding table for processing narrow radii with sanding tools
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Clamping Mandrel
14.0.952
Clamping mandrel for sanding tooling with Ø 30 mm shaft
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs