Radius Cutter | Ø 113 mm | PM
For the rounding off of cabinet edges, profile or glass beading, edge profiles, ceiling strips Continue
excl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Description
Equipped with HW reversible main cutters R = 3/6 mm. Possible radii: 3+6, 4+8, 5+10 mm. Aluminium moulding tool - surface hard anodised. For manual feed, limited chip thickness, low kickback.
Quality of the cutting edges
HW = tungsten carbide (old designation HM)
HS = high-alloy high-speed steel (high-performance steel)
SP = alloy tool steel (special steel)
Abbreviations
WM = Reversible knife (can be used on both sides)
PM = Profile knife
Technical information
Bore Diameter [mm] | 30 |
Cutter Quality | HW |
Diameter [mm] | 113 |
PM Main Cutters [pcs] | 2 |
Radius [mm] | 3 |
Rip Capacity [mm] | 25 |
Downloads
- Technical Drawing (PDF | 163.73 KB)
Matching articles
Replacement Knives
500-04-0872 | Profile B1 R=4+8
For the Hammer multi-radius cutter 500-04-087
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Replacement Knives
500-04-0873 | Profile A1 R=5+10
For the Hammer multi-radius cutter 500-04-087
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Replacement Knives
500-04-0871 | Profile C1 R=3+6
For the Hammer multi-radius cutter 500-04-087
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
This might also be of interest to you
Replacement Knives
500-04-0873 | Profile A1 R=5+10
For the Hammer multi-radius cutter 500-04-087
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Replacement Knives
500-04-0871 | Profile C1 R=3+6
For the Hammer multi-radius cutter 500-04-087
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Replacement Knives
500-04-0872 | Profile B1 R=4+8
For the Hammer multi-radius cutter 500-04-087
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs