Radius Cutter Case Set | Ø 132 mm | PM
For the rounding off of cabinet edges, profile or glass beading, edge profiles, ceiling strips Continue
excl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Description
Fitted with HW reversible main cutters R = 8 mm. 2 radius knives per wooden case: R = 3, 4, 5, 6, 10 mm
Steel moulding tool, surface burnished. For manual feeding, limited chip thickness, reduced kickback
Quality of the cutting edges
HW = tungsten carbide (old designation HM)
HS = high-alloy high-speed steel (high-performance steel)
SP = alloy tool steel (special steel)
Abbreviations
WM = Reversible knife (can be used on both sides)
PM = Profile knife
Technical information
Bore Diameter [mm] | 30 |
Cutter Quality | HW |
Diameter [mm] | 132 |
PM Main Cutters [pcs] | 2 |
Rip Capacity [mm] | 19,7 |
Downloads
- Technical Drawing (PDF | 160.95 KB)
This might also be of interest to you
Radius cutter R=3
04.0.142 | Radius 3 mm
For Felder radius cutters 04.0.141, 04.0.149
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Radius cutter R=4
04.0.143 | Radius 4 mm
For Felder radius cutters 04.0.141, 04.0.149
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Radius cutter R=5
04.0.144 | Radius 5 mm
For Felder radius cutters 04.0.141, 04.0.149
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Radius cutter R=6
04.0.145 | Radius 6 mm
For Felder radius cutters 04.0.141, 04.0.149
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Radius cutter R=8
04.0.146 | Radius 8 mm
For Felder radius cutters 04.0.141, 04.0.149
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Radius cutter R=10
04.0.147 | Radius 10 mm
For Felder radius cutters 04.0.141, 04.0.149
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs