Rabbet Cutter | Ø 220 mm | WM
Steel rabbet cutter with 2 tungsten carbide pulling cut cutting edges Continue
excl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Description
For grooving, jointing, rebating and flush moulding with guide ring. Steel moulding tool, burnished surface.
For manual feed, chip thickness limited, low kickback.
2 pulling cut tungsten carbide cutting edges. Tenon with 2 moulding tools.
Quality of the cutting edges
HW = tungsten carbide (old designation HM)
HS = high-alloy high-speed steel (high-performance steel)
SP = alloy tool steel (special steel)
Abbreviations
WM = Reversible knife (can be used on both sides)
PM = Profile knife
Technical information
Bore Diameter [mm] | 30 |
Cutter Quality | HW |
Diameter [mm] | 220 |
Moulding Depth [mm] | 74 |
Rip Capacity [mm] | 31 |
WM Main Cutters [pcs] | 2 |
WM Spurs [pcs] | 4 |
Downloads
- Technical Drawing (PDF | 161.17 KB)
This might also be of interest to you
Reversible Blade | HW | Width 12 mm | Clearance angle 35 °
04.0.098 | Length 30 mm
With 2 cutting edges made of tungsten carbide
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Reversible Spurs | Width 14 mm | Length 14 mm
04.0.003 | Thickness of 2.0 mm
Replacement cutters for Silent Power Felder Group moulding tools
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs