Your shopping cart is empty.
×![felder_400-108_01(2).jpg]()
![felder_400-108_02.jpg]()
![felder_400-108_01(2).jpg]()
![felder_400-108_02.jpg]()
Manual Workpiece Clamp
Eccentric clamp
Eccentric clamp with clamping shaft suitable for threaded seat M20 Continue
£164.00
excl. VAT , without shipping costs
£196.80
incl. 20% VAT , without shipping costs
Description
The eccentric clamp can be adjusted both horizontally and vertically, to any desired workpiece size. The high clamping pressure and the simple operation ensure comfortable and safe operation. The eccentric clamp can also be used in threaded seat M20. When used on aluminium sliding tables, the corresponding clamping set is required for that type of table.
Tip: Order the clamping set at the same time!
Technical information
| Clamp Depth [mm] | 300 |
| Clamping Height [mm] | 140 |
| Suitable for | M20 threaded mount |
Matching articles
T-Slot Nuts
Clamping Set for Eccentric Clamp
01.0.036 | Ø 20 mm and locking plate
£39.30
excl. VAT , without shipping costs
£47.16
incl. 20% VAT , without shipping costs
T-Slot Nuts
Clamping Set for Eccentric Clamp
410-190 | Adapter for eccentric clamp on Hammer sliding table with ball bearing guide
£36.80
excl. VAT , without shipping costs
£44.16
incl. 20% VAT , without shipping costs
This might also be of interest to you
Tenoning Hood
Tenoning Plate
430-620 | for all "X-Roll" format sliding tables with Felder Series 500/700
£202.00
excl. VAT , without shipping costs
£242.40
incl. 20% VAT , without shipping costs
Horizontal Slot Mortiser Accessories
Mitre fence
400-823
£166.00
excl. VAT , without shipping costs
£199.20
incl. 20% VAT , without shipping costs
T-Slot Nuts
Clamping Set for Eccentric Clamp
410-190 | Adapter for eccentric clamp on Hammer sliding table with ball bearing guide
£36.80
excl. VAT , without shipping costs
£44.16
incl. 20% VAT , without shipping costs
T-Slot Nuts
Clamping Set for Eccentric Clamp
01.0.036 | Ø 20 mm and locking plate
£39.30
excl. VAT , without shipping costs
£47.16
incl. 20% VAT , without shipping costs
Delivery start
Table Saws
Hammer K2S Sliding Table Saw
500-07-203 | 1 x 230 V | 50 Hz
£1,995.00
excl. VAT , without shipping costs
£2,394.00
incl. 20% VAT , without shipping costs