Round, Groove and Bevel Cutter | Ø 139 mm | WM
Rounding, grooving and bevelling cutters made of aluminium, with 4 mm radius. Continue
excl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Description
Two-piece moulder tool made of aluminium - surface hard anodised.
For manual feed, chip thickness limited, low kickback.
Extended range of applications:
- R = 2 mm /a = 45°, top (1)
- R = 2 mm /a = 45°, bottom (2)
- R = 3 mm /a = 45°, top (1)
- R = 3 mm /a = 45°, bottom (2)
- R = 5 mm /a = 45°, top (1)
- R = 5 mm /a = 45°, bottom (2)
- R = 6 mm /a = 45°, top (1)
- R = 6 mm /a = 45°, bottom (2)
Quality of the cutting edges
HW = tungsten carbide (old designation HM)
HS = high-alloy high-speed steel (high-performance steel)
SP = alloy tool steel (special steel)
Abbreviations
WM = Reversible knife (can be used on both sides)
PM = Profile knife
Technical information
Angle α [°] | 45 |
Bore Diameter [mm] | 30 |
Cutter Quality | HW |
Diameter [mm] | 139 |
Radius [mm] | 4 |
Rip Capacity [mm] | 18-50 |
WM Main Cutters [pcs] | 4 |
Downloads
- Technical Drawing (PDF | 165.73 KB)
This might also be of interest to you
Replacement knives
500-04-03911 | Radius 2 mm | Top
For Hammer cuttier head for rounding, grooving and bevelling 500-04-039
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Replacement knives
500-04-03912 | Radius 2 mm | Bottom
For Hammer cuttier head for rounding, grooving and bevelling 500-04-039
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Replacement knives
500-04-03921 | Radius 3 mm | Top
For Hammer cuttier head for rounding, grooving and bevelling 500-04-039
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Replacement knives
500-04-03922 | Radius 3 mm | Bottom
For Hammer cuttier head for rounding, grooving and bevelling 500-04-039
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Replacement knives
500-04-03941 | Radius 5 mm | Top
For Hammer cuttier head for rounding, grooving and bevelling 500-04-039
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Replacement knives
500-04-03942 | Radius 5 mm | Bottom
For Hammer cuttier head for rounding, grooving and bevelling 500-04-039
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Replacement knives
500-04-03951 | Radius 6 mm | Top
For Hammer cuttier head for rounding, grooving and bevelling 500-04-039
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Replacement knives
500-04-03952 | Radius 6 mm | Bottom
For Hammer cuttier head for rounding, grooving and bevelling 500-04-039
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Replacement knives
500-04-03931 | Radius 4 mm | Top
For Hammer cuttier head for rounding, grooving and bevelling 500-04-039
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Replacement knives
500-04-03932 | Radius 4 mm | Bottom
For Hammer cuttier head for rounding, grooving and bevelling 500-04-039
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Reversible Blade | HW | Width 12 mm | Clearance angle 35 °
04.0.119 | Length 50 mm
With 2 cutting edges made of tungsten carbide
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs