CNC Extraction Hose
Transparent, 10m long CNC extraction hose Continue
excl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Description
Application
Extraction and removal of abrasive media such as wood dust and chips, especially on CNC- machining centres
Properties
Flame resistant in accordance to DIN 4102 B1, hydrolysis and microbe resistant, high abrasion resistance, very good flexibility, good petrol and oil resistance, halogen and plasticiser-free, dissipative in accordance with BGI 739-2 when the coil is grounded
Technical information
Hose Diameter [mm] | 250 |
Length [mm] | 10000 |
Matching articles
Pipe clamp for flared pipes
02.0.15825 | Ø 250 mm
The galvanised steel sleeve can be closed using two M8 screws
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Hose connector flanged on one side
02.0.15425 | Ø 250 mm
Galvanised steel connector flanged on one side for connecting a pipe to an extraction hose
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Hose Clamp
02.0.119 | for hose Ø 240-260 mm | 1 piece
Clamps for fixing the extraction hose to connections
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
This might also be of interest to you
Rope Loop for CNC Extraction Hose
02.0.226 | Ø 250 mm
Rope loop with hose-protecting rubber strap
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
90° hood low version
02.0.206 | Ø 250 mm
For height-saving connection of the CNC to the hose
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Slewing Ring for CNC Machines
02.0.208 | Ø 250 mm
Torque compensation for 90° hood in low version or for extraction hose
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs