Panel Raising Cutter Ø 160 mm | WM
Aluminium panel raising cutter with panel raising depth of 55 mm Continue
excl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Description
For panel raising fillings, case fillings, revolving and sliding door fillings, profiling of workpiece edges.
1 tool - 3 possible profiles!
Equipped with HW reversible main cutters, profile A
Aluminium moulding tool, surface hard anodised.
For manual feed, chip thickness limited, low kickback.
Extended range of applications:
- Profile B (501-04-031B)
- Profile C (501-04-031C)
Quality of the cutting edges
HW = tungsten carbide (old designation HM)
HS = high-alloy high-speed steel (high-performance steel)
SP = alloy tool steel (special steel)
Abbreviations
WM = Reversible knife (can be used on both sides)
PM = Profile knife
Technical information
Bore Diameter [mm] | 30 |
Cutter Quality | HW |
Diameter [mm] | 160 |
Moulding Depth [mm] | 55 |
Rip Capacity [mm] | 12,6 |
WM Main Cutters [pcs] | 2 |
Downloads
- Technical Drawing (PDF | 178.28 KB)
This might also be of interest to you
Reversible blades for 501-04-031
501-04-031A | Profile A
For the Hammer panel raising cutter 501-04-031
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Reversible blades for 501-04-031
501-04-031B | Profile B
For the Hammer panel raising cutter 501-04-031
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Reversible blades for 501-04-031
501-04-031C | Profile C
For the Hammer panel raising cutter 501-04-031
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs