Supplementary Cutter
excl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
Description
Equipped with tungsten carbide main cutters and spurs. Steel moulding tool, surface burnished. For manual feed, chip thickness limited, low kickback.
Add-on to the tongue and groove cutter set 04.3.130
Supplementary cutter "jointing and chamfering cutter for closed joints
Quality of the cutting edges
HW = tungsten carbide (old designation HM)
HS = high-alloy high-speed steel (high-performance steel)
SP = alloy tool steel (special steel)
Abbreviations
WM = Reversible knife (can be used on both sides)
PM = Profile knife
Technical information
Bore Diameter [mm] | 50 |
Cutter Quality | HW |
Diameter [mm] | 129 |
Execution | for closed joint |
PM Main Cutters [pcs] | 2 |
Rip Capacity [mm] | 9,6 |
Downloads
- Technical Drawing (PDF | 1.07 MB)
Matching articles
Board Cutter Set | 5 profiles possible with extension cutters
04.3.130 | Ø 160 x 40 x 30 mm
Production of tongue and groove boards with open or closed V-joints, smooth shuttering boards, floorboards.
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs
This might also be of interest to you
Profile Knife 04.0.137
04.0.137
For Felder jointing and bevel cutters 04.3.133 and 04.3.132
continue readingexcl. VAT , without shipping costs
incl. 20% VAT , without shipping costs