Tilting Shaper F 700 M

• Precise double trunnion system
• High load-bearing capacity and operating life
• Play free tilt
• Unaffected by dust
• Completely maintenance free
• No lubrication required
• 6 year guarantee

The Felder 700 Series spindle aggregate sets standards that are unparalleled.

115 mm spindle useable height above the table (140/160 mm)

Quick-change system of the moulder spindle

Change the speed simply from the front of the machine

Highspeed spindle for router tools with a speed of 15,000 rpm

Electrical height adjustment with digital LED display

Electrical angle adjustment with digital LED display

4 operating speeds (3500, 6500, 8000, 10,000 rpm)

Rearward tilt 0° to 45°

Precise, double sided guide support

Dovetail guidance system of the height adjustment

Excellent vibration absorption from heavy cast iron unit

The fully electrical “Power-Drive” control offers exact adjustment and repeat accuracy. The saw blade height and the angle settings can be adjusted at the turn of a knob, the fine setting adjustments are carried out to tenth of a millimetre accuracy using a push button. Red LED digits display the current position in real time on the control panel.

The Felder rearward tilting ­spindle is the correct way for easy and safe operation:

• Safety, since there is no pinch point
• No limitations on work piece height
• Problem free power feeder operation
• Impeccable workpiece ­finish
• Optimal chip removal

The fence allows tooling of a maximum diameter of 230 mm to be used. The fine adjustment can be set between -5 to +25 mm. The extraction of the chips is done via the integrated extraction connection.

Advantages of the Felder spindle quick change system:

• Quick, easy change between different types of spindles
• Ability to use 30, 32, 35, 40, 50 mm and 1¼” diameter spindles
• Use of the Felder high speed router spindle for router bits or high speed tools at 15,000 rpm.
• Automatic repeatable setting for series production work

Additional to the parallel guiding of the spindle fence the MULTI-adjustment system also enables

The quick adjustment to the tool diameter

Automatic repeat setting after removal of your fence

Parallel adjustments of the shaper fence

Fence can be pre-set to a desired position

Measurement scale for depth of cut

The large table opening allows for maximum operator safety. With large ­dimensioned tenoning and panel ­raising tooling, the cutterblock can be ­conveniently positioned below the table.

The safety bar guides, great for “end-grain” work (optional).

The use of a power feeder ensures that standard work when moulding can be carried out cleanly and precisely.

The ”swing away“ power feeder arm allows for maximum 0perating convenience. F 900 and Profil 45 only.

Increase the usable surface of your machines with table extensions and additional supports from Felder. These ensure that you can process heavy and large workpieces with ease, without the need of any assistance.

The solid cast iron moulding table is 1200 mm in width, with the large working surface ensuring maximum stabitily. The tried and tested Felder cast iron extensions can also be used when processing larger workpieces to extend the table up to a total length of 2200 mm.

Change routing tools quickly and safely. The "Quick-Lock" clamping system allows a convenient change of cutters on the table router and reduces the risk of injury from slipping. Suitable for Ø 30 mm spindles