Sabuk Pengamplasan Lebar FW 850 classic

Unit kombinasi dengan diameter roller 90 mm digunakan untuk kalibrasi kayu solid. Bantalan pengamplasan elektro-pneumatik menekan dengan lembut dan merata ke permukaan benda kerja dan dapat digunakan untuk banyak tipe bahan termasuk benda kerja veneer/pernis.

Secara konsisten, bantalan pengamplasan elektro-pneumatik dengan kontrol tekanan dari sisi operator. Lapisan grafit yang tahan lama memastikan hasil pengamplasan yang sempurna.

Sanding belt bisa diganti dengan cepat dan tanpa menggunakan alat apa pun, memastikan pengaturan yang mudah tanpa waktu downtime yang panjang.

Motor yang kuat menjamin hasil pengamplasan sempurna  Transmisi kekuatan yang konstan pada agregat pengamplasan adalah faktor signifikan pada proses produksi penyelesaian pengamplasan berkualitas tinggi

Operator mesin bisa memilih antara dua kecepatan pemakanan, 4 dan 8 meter/menit. Jika dibutuhkan, kecepatan juga bisa disesuaikan selama proses pengamplasan.

Panel kontrol yang terstruktur dengan baik dan pintar menyediakan produktifitas yang maksimum. Melalui panel kontrol utama Anda bisa menyesuaikan meja kerja dengan ketebalan benda kerja, sampai dengan 0.1 mm, pilih kecepatan pemakanan yang diinginkan dan mulai nyalakan mesinnya. Penggunaan alat contact roller atau alat sanding pad bisa melalui panel kendali tambahan, yang juga digunakan untuk penyesuaian halus dari tekanan alat sanding pad. Dengan demikian, hasil pengamplasan optimal bisa dicapai.

Sistem kendali sanding belt mengamati belt yang bekerja dan mengaktivasi kendali sanding belt elektronik-pneumatic, yang memutar sanding belt secara bolak-balik. Panduan sabuk mengawasi jalannya sabuk dan menghentikan motor sanding belt ketika ada potensi sanding belt terlepas.

Professional surface processing and small space requirements no longer pose a contradiction! Again, Felder has created a machine series that fits into any size workshop.

The continuously vulcanised feed belt guarantees maximum power transfer and durability. Feed speeds of 4 & 8 m/min always enable optimum adaptation to the material and the sanding grit. The speed can also be adjusted during the sanding process.

The clearly structured and intuitive display provides max. productivity. The infeed thickness is clearly shown on the 15" smartouch display and can be adjusted with an accuracy of a tenth of a millimetre. 

The individual units of the machine can also be activated or deactivated and the feed speed can be continuously adjusted.

The continuously vulcanised feed belt with honeycomb structure guarantees maximum power transfer and durability. The feed speed can be continuously adjusted from 2.5 to 18 m/min. If necessary, the speed can also be adjusted during the sanding process. This ensures that the feed rate is always optimised to adapt to the material and the sanding belt grit.

The machine features two processing units - a contact roller unit and a combination sanding unit. This means that pre-sanding and fine sanding are possible in only one work step.

The contact roller unit calibrates workpieces, and thanks to the reduced contact surface greater chip removal of up to 0.5 mm is possible. A grooved, rubberised contact roller with 85° Shore hardness and a diameter of 140 mm is incorporated here for maximum power transfer. On request, we may also install a grooved steel contact roller on your FW 1352 perform.

The combination sanding unit with a grooved and rubberised contact roller in 45° Shore hardness and 140 mm roller diameter can be used for a wide range of sanding applications. The electro-pneumatic sanding pad presses gently and evenly onto the workpiece surface - this also allows veneered workpieces to be sanded.

On the 2. sanding unit of your FW 1352 an air jet cleaning unit is fitted as standard for the sanding belt. This ensures that the sanding belt remains dust-free and in good working order.

Sesuai permintaan, kami bisa memperlengkapi sabuk pengamplas lebar Felder anda dengan tambahan daya dukung  penggulung pada kedua sisi pemakanan dan keluaran dari mesin

Sebagai pilihan, pada sisi pengiriman mesin, sangat mungkin untuk membangun fasilitas penyikat Sikat yang berbeda bisa disisipkan dan tugas mereka adalah membersihkan, memoles atau menonjolkan permukaan benda kerja.

Maximum process reliability guaranteed when setting the working height: As the workpiece is fed into the machine, the workpiece thickness is automatically adjusted by means of fibre optic and laser sensors. The measuring device adjusts the passage height exactly to the material thickness, deducting the desired chip removal.

BCO is a new feature for monitoring the wear of the sanding belt. The operator receives an indication as to which part of the sanding belt is less worn and can therefore feed the workpieces at this point - thus preventing irregular wear of the sanding belt.

The GLP is another new feature which can be added as an option to your wide belt sander. GLP assists in reducing the power consumption and provides the following benefits:

+ speed reduction of the sanding belt between work processes
+ automatic switch-off of the infeed belt
+ automatic signal for valve control of the extraction system