Sliding Table Panel Saw K 540 S

The electronically balanced saw arbor with dual bearing seat system is powered via a Poly-V belt. Combined this results in an almost 100 % trans­mission of power to the saw blade. The saw arbor diameter on our machinery is a standard European size of 30 mm (1,18"). We offer this size of arbor for increased stability when performing a bigger cut and also more user safery when especially using dado tooling. The standard US size arbor is 16 mm (5/8"). This is almost half the diameter of our arbor and is intended for lighter machinery with small tooling. The European 30 mm diameter tooling is available for various suppliers throughout the US and existing tooling can also be resized to fit our machinery. Take a step "UP" in your machine and also in your tooling. Please visit our on-line shop to view the range of tools we can offer. Link: www.felder-tooling.us

The advanced circular saw unit with the patented tilt segment "Easy-Glide" impresses with a cutting height of 140 mm when using a Ø 400 mm saw blade. The electric scoring unit for scoring blades with a diameter of 120 mm can be used in combination with a Ø 350 mm saw blade.

The crosscut fence is 51” (1300 mm) for crosscuts between +45° and –45°. The fence can be attached to the sliding table with out the use of tools. The positive stop provides you with the exact 90° position. The beveled miter scale with hairline readout is visible from the operating area and thus allows exact reading of the required crosscut value. The large crosscut fence stops are constructed so that a small tongue on the stop fits perfectly into a machined groove on the fence. This keeps the stop firmly in place for both straight and mitered cuts.

The continuously developed linear guiding system from Felder has been astounding woodworkers since 1990. The high quality­ ­format sliding table guiding ­technology “X-Roll” comes with a 10 year Felder warranty and offers amazing operating smoothness and is completely maintenance free. The “x” design of the position of the roller bearings ensures that they move smoothly along hardened guides.

The beveled miter scale with hairline readout is visible from the operating area and thus allows exact reading of the required crosscut value.

The single handed adjustment system ensures quick and accurate setting of the rip fence. The standard rip capacity is 31” (800 mm) or an optional 49” (1250 mm). The easy to read rip scale is perfectly integrated into the saw table. The aluminum rip fence extrusion can be slid backwards to optimize the feed of workpieces. Optional parallel cutting fence fine adjustment

The Felder 500 Series saw assembly is fully compatible with dado tooling. Thanks to a removable table insert and flanges, specialized Felder dado tooling can be used.

Highest operating safety and maximum flexibility when processing large dimensioned workpieces: the new Felder overhead saw guard can be swung away easily and is always there where it is required.

• For rip and formatting cuts of large panel material
• Floor guides are height adjustable, 15 ft. (4.5 m) total length, consisting of 3 segments

Accurate angle adjustments, efficient operation and calibration are all made possible by the precision mitre guide index system.

The outrigger table enables the user to process large, heavy work pieces. For the highest in precision and stability, four rollers guide the telescopic support arm. The telescopic crosscut fence with mounting system and ergonomically designed scale with magnifying lens on the crosscut stop guarantees precise settings and crosscuts up to 2600 mm. The crosscut fence can be positioned between 90°-45° and has one crosscut stop as standard. There is a fixed end stop position for 90°.

Electronic precision! The patented double-mitre gauge from Felder allows for mitre cuts on pieces with different widths and at any angle. Easy to use: Simply enter the desired angle as well as the widths of your work pieces on the keyboard. Immediately you will receive the settings and can set the electronic double miter gauge accordingly. The fence stop on the fence can be adjusted up to 53” with the scale. Depending on set angles, the lengthcompensating vernier scale will allow you to set the exact work piece length when you do angle cuts.

Sensational: An electric scoring unit as standard