Sliding Table Panel Saw K 500 S
All prices excl. sales tax
K 500 S - the “small” Panel Saw from FELDER
Do not be fooled by the inconspicuous exterior of the FELDER K 500 S. The sliding table saw is a true power pack, despite its size. With the innovative, tilting saw blade unit and precision double guiding for precise angle and height adjustment, the K500 S guarantees a new dimension of efficiency. The built-in, electrically operated scoring saw blade with a Ø of 120 mm makes cuts even through materials with sensitive surfaces a breeze. At the heart of the FELDER K 500 S, the powerful circular saw unit a circular saw shaft, which allows a saw blade with up to Ø 315 mm while using of the scoring unit. A ten year guarantee on the "X-Roll" sliding table, highest manufacturing quality and strict FELDER production standards make this sliding table panel saw reliable partner for many years to come.
- Efficiency meets ease of use: 104 mm cutting height with a saw blade diameter of 315 mm
- Combined use of an electric Ø 120 mm scoring unit with a Ø 315 mm main saw blade
- "Easy-Glide" tilting segment guide with 6 year guarantee
- Patented "X-Roll" sliding table with 10 year guarantee
- Cutting length 2500–3200 mm
- Operating smoothness and precision even when under maximum load: large dimensioned, solid outrigger 1300
- Outrigger crosscut fence 2600 mm (1300 or 3200 mm optional)
FELDER. Quality and precision in a nutshell
Since 1956, a guarantee for perfect results with excellent ease of use and reliability in regular professional use. Woodworkers are always enthusiastic about the individual and solid solutions for small and mid-sized businesses.
The most important highlights at a glance
... Your decision for Felder, a risk-free decision
- The right machine for every budget
- Complete reliability in professional use
- Tailor made machine solutions
- High quality cast iron machine table and aggregates
- Innovative detail solutions derived from 60 years of experience – already included in the standard configuration
- First class manufacturing and finishing standards
- Intuitive application concepts
- Modern, distinct design
- Quality and precision from Austria
- Powerful and efficient
- Complete package: Comprehensive service support
Details
The patented tilt segment “Easy-Glide” fulfills the highest requirements in businesses and industries. A precise, guided, doublesided support, guarantees maximum load bearing and tolerance free tilting and is absolutely maintenance free. A special, highly durable synthetic material situated in the guide of the tilting segment ensures extremely smooth movement and long-lasting precision. The tilting guide system, a synthetic material tried and tested in aerospace and lock construction, works without the requirement of lubrication and is totally resistant to dust. With a 6 year factory guarantee this Felder component offers reliabilty for many years to come.
The enhanced circular saw unit with the patented tilt segment "Easy-Glide" enables the combination of a main saw blade with a Ø from 250 mm to Ø 315 mm and a Ø 120 mm scoring unit.
The electronically balanced saw arbor with dual bearing seat system is powered via a Poly-V belt. Combined this results in an almost 100 % transmission of power to the saw blade. The saw arbor diameter on our machinery is a standard European size of 30 mm (1,18"). We offer this size of arbor for increased stability when performing a bigger cut and also more user safery when especially using dado tooling. The standard US size arbor is 16 mm (5/8"). This is almost half the diameter of our arbor and is intended for lighter machinery with small tooling. The European 30 mm diameter tooling is available for various suppliers throughout the US and existing tooling can also be resized to fit our machinery. Take a step "UP" in your machine and also in your tooling. Please visit our on-line shop to view the range of tools we can offer.
The Felder 500 Series saw assembly is fully compatible with dado tooling. Thanks to a removable table insert and flanges, specialized Felder dado tooling can be used.
Sensational: An electric scoring unit as standard
The continuously developed linear guiding system from Felder has been astounding woodworkers since 1990. The high quality format sliding table guiding technology “X-Roll” comes with a 10 year Felder warranty and offers amazing operating smoothness and is completely maintenance free. The “x” design of the position of the roller bearings ensures that they move smoothly along hardened guides.
The outrigger table enables the user to process large, heavy work pieces. For the highest in precision and stability, four rollers guide the telescopic support arm.
The telescopic crosscut fence with mounting system and ergonomically designed scale with magnifying lens on the crosscut stop guarantees precise settings and crosscuts up to 2600 mm. The crosscut fence can be positioned between 90°-45° and has one crosscut stop as standard. There is a fixed end stop position for 90°.
The beveled miter scale with hairline readout is visible from the operating area and thus allows exact reading of the required crosscut value.
Accurate angle adjustments, efficient operation and calibration are all made possible by the precision mitre guide index system.
The crosscut fence is 51” (1300 mm) for crosscuts between +45° and –45°. The fence can be attached to the sliding table with out the use of tools. The positive stop provides you with the exact 90° position.
The beveled miter scale with hairline readout is visible from the operating area and thus allows exact reading of the required crosscut value.
The large crosscut fence stops are constructed so that a small tongue on the stop fits perfectly into a machined groove on the fence. This keeps the stop firmly in place for both straight and mitered cuts.
The single handed adjustment system ensures quick and accurate setting of the rip fence. The standard rip capacity is 31” (800 mm) or an optional 49” (1250 mm). The easy to read rip scale is perfectly integrated into the saw table. The aluminum rip fence extrusion can be slid backwards to optimize the feed of workpieces.
Optional parallel cutting fence fine adjustment
- For rip and formatting cuts of large panel material
- Floor guides are height adjustable, 15 ft. (4.5 m) total length, consisting of 3 segments
Electronic precision! The patented double-mitre gauge from Felder allows for mitre cuts on pieces with different widths and at any angle.
Easy to use: Simply enter the desired angle as well as the widths of your work pieces on the keyboard. Immediately you will receive the settings and can set the electronic double miter gauge accordingly.
The fence stop on the fence can be adjusted up to 53” with the scale.
Depending on set angles, the lengthcompensating vernier scale will allow you to set the exact work piece length when you do angle cuts.
The optimized extraction pipe guide guarantees that there is always enough space and a clean working surface.
Highest operating safety and maximum flexibility when processing large dimensioned workpieces: the new Felder overhead saw guard can be swung away easily and is always there where it is required.
Technical data
Electrical setup
K 500 S
002
3x 230 V motor voltage
W
003
1x 230 V, motor power 4.0 HP (3.0 kW)*
S
005
60 Hz
S
007
5.5 HP (4.0 kW)*
O
008
7.5 HP (5.5 kW)*
O
10
Star-delta start is necessary from 7.5 HP and 3x230V
O
29
Electrical equipment according to CSA rules
O
28
Additional emergency stop
O
Saw and Scoring Unit
K 500 S
69
Sliding table saw with tilting saw blade (90°–45°), maximum cutting height 104 mm with a 315 mm saw blade, 4800 rpm
S
71
Digital indicator on handwheel for saw tilt
O
82
Preparation for Dado tooling up to 19.5 mm in width
O
84
Micro adjustable rip fence
O
75
Electronic scoring unit, dia. 120 mm with main saw blade dia. 315/350 mm
O
23
Electrically driven scoring unit with 1 x 230 V; Ø-120 mm with main saw blade-Ø 315/350 mm (#003)
O
76
Cutting width 800 mm with full table, min. transport width 800 mm
S
77
Rip capacity 1250 mm, min. transport width 800 mm
O
91
Extractor hose mounting for rip capacity 800/1250 mm
O
80
Saw guard EURO II
S
81
Overhead saw guard for 800/1250 mm cutting width, swings away from the working area
O
Sliding Tables
K 500 S
133
Dimension sliding table F, cutting length 2500 mm(98"), anodised** with edging shoe
S
134
Dimension sliding table X, cutting length 2800 mm(110"), anodised** with edging shoe
O
135
Dimension sliding table XL, cutting length 3200 mm(126"), anodised** with edging shoe
O
136
Dimension sliding table anodised
S
Outrigger Tables and Crosscut Fences
K 500 S
161
1300 mm Outrigger table for 1300–3200 mm sliding tables, Series 500
S
164
Crosscut fence 1300 mm for all sliding tables
O
164B
Inch scale for crosscut fence 2600
W
165
Telescopic extension for crosscut fence 1300 mm to 2050 mm (#164)
O
166
Crosscut fence 2600 mm for outrigger table (#160/161)
S
167
Crosscut fence 3200 mm for outrigger table, with 2 crosscut stops instead of crosscut fence 2600 mm
O
169
Crosscut fence 2600 mm(102") for outrigger table, “X-Roll”
O
170
Precision mitre unit with pin locating system for outrigger table crosscut fence
O
General
K 500 S
-
Working height in inch
35
-
Min. transport width in inch
31½
-
Extractor connection port diameter in mm on overhead saw guard
120/50
-
Weight, lbs (with average equipment)
1300
Important Accessories
K 500 S
223
IPPC
S
Transport
K 500 S
221
Preparation for container
S
S ... Standard equipment
O ... Option
W ... Choice
- ... not available
Customer service & maintenance
Specially trained service personnel are always available to provide specialised on-site service for you. If the matter is urgent you can call our hotline centre for straightforward immediate help. Contact our consultants or report your request conveniently online around the clock.
Do you have any questions?
We are happy to advise you online, over the phone or on-site at one of our more than 270 sales and service centres worldwide.
Showrooms
FELDER GROUP USA Headquarters Details
FELDER GROUP USA Headquarters
USA Headquarters | New Castle, Delaware Showroom
2 Lukens Drive, Suite 100-400
New Castle, DE 19720
Tel.: 866-792-5288
Fax: 302-322-9865
Business Hours: Mo. – Fr. | 8am – 5pm (EST)
USA Headquarters | New Castle, Delaware Showroom
2 Lukens Drive, Suite 100-400
New Castle, DE 19720
Tel.: 866-792-5288
Fax: 302-322-9865
Business Hours: Mo. – Fr. | 8am – 5pm (EST)
FELDER GROUP USA Dallas Details
FELDER GROUP USA Dallas
South Division | Dallas, Texas Showroom
1420 Halsey Way / Suite 100
Carrollton, TX 75007
Tel.: 866-792-5288
Business Hours: Mo. – Fr. | 8am – 5pm (CST)
South Division | Dallas, Texas Showroom
1420 Halsey Way / Suite 100
Carrollton, TX 75007
Tel.: 866-792-5288
Business Hours: Mo. – Fr. | 8am – 5pm (CST)
FELDER GROUP USA West Sacramento Details
FELDER GROUP USA West Sacramento
West Division | West Sacramento, California Showroom
1747 Enterprise Blvd.
West Sacramento, CA 95691
Tel.: 866-792-5288
Fax: 916-375-3194
Business Hours: Mo. – Fr. | 8am – 5pm (PST)
West Division | West Sacramento, California Showroom
1747 Enterprise Blvd.
West Sacramento, CA 95691
Tel.: 866-792-5288
Fax: 916-375-3194
Business Hours: Mo. – Fr. | 8am – 5pm (PST)
FELDER GROUP USA Anaheim Details
FELDER GROUP USA Anaheim
West Division | Anaheim, California Showroom
3531 E. Miraloma Ave., Unit 1
Anaheim, CA 92806
Tel.: 866-792-5288
Business Hours: Mo. – Fr. | 8am – 5pm (PST)
West Division | Anaheim, California Showroom
3531 E. Miraloma Ave., Unit 1
Anaheim, CA 92806
Tel.: 866-792-5288
Business Hours: Mo. – Fr. | 8am – 5pm (PST)
FELDER GROUP USA Denver Details
FELDER GROUP USA Denver
West Division | Denver, Colorado
Tel.: 866-792-5288
Business Hours: On appointment
West Division | Denver, Colorado
Tel.: 866-792-5288
Business Hours: On appointment