Shapers

Tilting Shaper F 700 M

Scope of application
shapers f 700 m felder wood panel plastic

Vibration free stability for perfect results

With the new F 700 M tilting spindle moulder, Felder is not only offering an inexpensive solution for all woodworking shops, but also the ideal complement to CNC supported processing. With a solid cast iron table for vibration free stability, you will be ready for every challenge of modern woodworking.

Highlights:

  • Solid cast iron table offering vibration free stability
  • Maximum ease of operation with “Power-Drive”: electrical height and angle adjustment
  • Felder spindle quick change system: quick changeover ensuring maximum productivity 
  • Maximum operating safety: Spindle tilts rearwards from 90°-45°
  • Maintenance free tilting segment guide “Easy-Glide” with 6 year warranty
  • 230 mm table opening  a particular advantage when panel raising 
  • Reliable repeatability and precise quick settings: The Felder MULTI-adjustment system
  • Dual extraction through both the spindle fence and from under the table  a clean solution

FELDER. Quality and precision in a nutshell

Since 1956, a guarantee for perfect results with excellent ease of use and reliability in regular professional use. Woodworkers are always enthusiastic about the individual and solid solutions for small and mid-sized businesses.

The most important highlights at a glance

1662-massive-graugusstische.png
1626-fraesspindelschwenkung.png
8747-fraesspindel-schnellwechselsystem.png

... Your decision for Felder, a risk-free decision

3227-3310-fraesmaschine-f700m-felder-feldergroup_2.png
  • The right machine for every budget
  • Complete reliability in professional use
  • Tailor made machine solutions
  • High quality cast iron machine table and aggregates
  • Innovative detail solutions derived from 60 years of experience  already included in the standard configuration
  • First class manufacturing and finishing standards
  • Intuitive application concepts
  • Modern, distinct design
  • Quality and precision from Austria
  • Powerful and efficient
  • Complete package: Comprehensive service support

Details

  • Precise double trunnion system
  • High load-bearing capacity and operating life
  • Play free tilt
  • Unaffected by dust
  • Completely maintenance free
  • No lubrication required
  • 6 year guarantee
983-easyglide.png
The Felder 700 Series spindle aggregate sets standards that are unparalleled.
  • 115 mm spindle useable height above the table (140/160 mm)
  • Quick-change system of the moulder spindle
  • Change the speed simply from the front of the machine
  • Highspeed spindle for router tools with a speed of 15,000 rpm
  • Electrical height adjustment with digital LED display
  • Electrical angle adjustment with digital LED display
  • 4 operating speeds (3500, 6500, 8000, 10,000 rpm)
  • Rearward tilt 0° to 45°
  • Precise, double sided guide support
  • Dovetail guidance system of the height adjustment
  • Excellent vibration absorption from heavy cast iron unit
  • 8748-fraesaggregat700.png
    The fully electrical “Power-Drive” control offers exact adjustment and repeat accuracy. The saw blade height and the angle settings can be adjusted at the turn of a knob, the fine setting adjustments are carried out to tenth of a millimetre accuracy using a push button. Red LED digits display the current position in real time on the control panel.

    The Felder rearward tilting ­spindle is the correct way for easy and safe operation:

    • Safety, since there is no pinch point
    • No limitations on work piece height
    • Problem free power feeder operation
    • Impeccable workpiece ­finish
    • Optimal chip removal
    1626-fraesspindelschwenkung.png
    The fence allows tooling of a maximum diameter of 230 mm to be used. The fine adjustment can be set between -5 to +25 mm. The extraction of the chips is done via the integrated extraction connection.
    8506-fraesanschlag.png

    Advantages of the Felder spindle quick change system:

    • Quick, easy change between different types of spindles
    • Ability to use 30, 32, 35, 40, 50 mm and 1¼” diameter spindles
    • Use of the Felder high speed router spindle for router bits or high speed tools at 15,000 rpm.
    • Automatic repeatable setting for series production work
    8747-fraesspindel-schnellwechselsystem.png
    Additional to the parallel guiding of the spindle fence the MULTI-adjustment system also enables
  • The quick adjustment to the tool diameter
  • Automatic repeat setting after removal of your fence
  • Parallel adjustments of the shaper fence
  • Fence can be pre-set to a desired position
  • Measurement scale for depth of cut
  • The large table opening allows for maximum operator safety. With large ­dimensioned tenoning and panel ­raising tooling, the cutterblock can be ­conveniently positioned below the table.
    8771-fraestischoeffnung.png
    The safety bar guides, great for “end-grain” work (optional).
    8763-sicherheitslineale.png
    The use of a power feeder ensures that standard work when moulding can be carried out cleanly and precisely.
    The ”swing away“ power feeder arm allows for maximum 0perating convenience. F 900 and Profil 45 only.
    1699-wegschwenkvorrichtung.jpg
    Increase the usable surface of your machines with table extensions and additional supports from Felder. These ensure that you can process heavy and large workpieces with ease, without the need of any assistance.
    1700-tischverlaengerung.png
    The solid cast iron moulding table is 1200 mm in width, with the large working surface ensuring maximum stabitily. The tried and tested Felder cast iron extensions can also be used when processing larger workpieces to extend the table up to a total length of 2500 mm.
    1662-massive-graugusstische.png
    Change routing tools quickly and safely. The "Quick-Lock" clamping system allows a convenient change of cutters on the table router and reduces the risk of injury from slipping. Suitable for Ø 30 mm spindles 
    8504-quick-lock.png

    Technology Data

    Electrical setup

    001
    3x 400 V motor voltage
    S
    002
    3x 230 V motor voltage
    W
    003
    1x 230 V, motor power 4.0 HP (3.0 kW)*
    O
    004
    50 Hz
    S
    005
    60 Hz
    W
    007
    5.5 HP (4.0 kW)*
    S
    008
    7.5 HP (5.5 kW)* (!002)
    O
    009
    10.0 HP (7.35 kW)*
    O
    10
    Star-delta start is necessary from 7.5 HP and 3x230V
    O
    11
    Switch for forward and reverse run
    O
    12
    Trigger switch for dust extractor start
    O
    14
    3-phase CEE coupling for additional equipment with time-delayed connection (essential for the use of a power feeder)
    O

    Spindle Moulder Unit and Spindle Fence

    -
    Table opening in mm
    230
    100
    Moulder spindle Ø 30 mm, usable height 140 mm
    O
    101
    Moulder spindle Ø 40 mm, usable height 160 mm
    O
    102
    Moulder spindle Ø 50 mm, usable height 160 mm
    O
    103
    Moulder spindle Ø 30 mm, usable height 115 mm
    S
    104
    Moulder spindle Ø 50 mm, usable height 115 mm
    O
    105
    Moulder spindle Ø 1¼”, usable height 115 mm
    O
    106
    Moulder spindle Ø 35 mm, usable height 115 mm
    O
    107
    Moulder spindle Ø 32 mm, usable height 115 mm
    O
    108
    High speed router spindle 15,000 rpm, instead of Ø 30 mm spindle
    O
    109
    Tilting spindle moulder (90°–45°), 3500/6500/8000/10,000 rpm
    S
    110
    Scale for tilting spindle moulder on the hand wheel (!119)
    S
    112
    Spindle moulder fence 230 for max. ­tooling diameter 230 mm, fence plates 400 mm
    S
    113
    MULTI adjustment for spindle fence 230 (#112)
    S
    116
    Aluminium spindle fence plates anodised
    S
    117
    Spindle fence plates anodised with “safety bar guides” (#112)
    O
    118
    Electrical height adjustment of the moulding spindle with LED-display („Power-Drive“ F1) (#110)
    S
    119
    Electrical height and angle adjustment of the spindle moulder with LED display (#201)
    O
    121
    External spindle lock
    S
    123
    EURO Spindle moulder guard
    S
    125
    Safety fence plates “Integral” 500 mm
    O
    180
    1270 mm pull out frame with emergency stop
    O
    181
    2200 mm pull out frame with emergency stop (#182)
    O
    182
    Table extension on both sides 500 mm
    O

    Through feed

    226
    Professional power feeder package for production work with the Variofeed 4-2 pillars (#001)
    O

    General

    -
    Extractor connection port diameter in mm on spindle moulder fence/below table extraction
    120/80
    -
    Min. transport width in mm (without option 012)
    900
    -
    Weight kg (with standard configuration)
    450
    -
    Working height in mm
    890

    Important Accessories

    212
    Swing-away bracket for power feeder
    O
    215
    Moulding device for fixed table moulder
    O
    223
    IPPC
    O

    Transport

    221
    Preparation for container
    O
    S ... Standard equipment O ... Option W ... Choice - ... not available

    Customer service & maintenance

    Specially trained service personnel are always available to provide specialised on-site service for you. If the matter is urgent you can call our hotline centre for straightforward immediate help.  Contact our consultants or report your request conveniently online around the clock.
    feldergroup-contact-us.png

    Do you have any questions?

    We are happy to advise you online, over the phone or on-site at one of our more than 270 sales and service centres worldwide. 

    Showrooms

    FELDER GROUP USA Headquarters

    FELDER GROUP USA Headquarters
    USA Headquarters | New Castle, Delaware Showroom
    2 Lukens Drive, Suite 100-400
    New Castle, DE 19720
    Tel.: 866-792-5288
    Fax: 302-322-9865

    Business Hours: Mo. – Fr. | 8am – 5pm (EST)

    FELDER GROUP USA Dallas

    FELDER GROUP USA Dallas
    South Division | Dallas, Texas Showroom
    1420 Halsey Way / Suite 100
    Carrollton, TX 75007
    Tel.: 866-792-5288

    Business Hours: Mo. – Fr. | 8am – 5pm (CST)

    FELDER GROUP USA West Sacramento

    FELDER GROUP USA West Sacramento
    West Division | West Sacramento, California Showroom
    1747 Enterprise Blvd.
    West Sacramento, CA 95691
    Tel.: 866-792-5288
    Fax: 916-375-3194

    Business Hours: Mo. – Fr. | 8am – 5pm (PST)

    FELDER GROUP USA Anaheim

    FELDER GROUP USA Anaheim
    West Division | Anaheim, California Showroom
    3531 E. Miraloma Ave., Unit 1
    Anaheim, CA 92806
    Tel.: 866-792-5288

    Business Hours: Mo. – Fr. | 8am – 5pm (PST)

    FELDER GROUP USA Denver

    FELDER GROUP USA Denver
    West Division | Denver, Colorado

    Tel.: 866-792-5288

    Business Hours: On appointment
    Show more