LR pixel

Edgebander tempora F600 60.06L glueBox

Choose model
edgebanders tempora f600 60.06l gluebox format4 panel
Scope of application
edgebanders tempora f600 60.06l gluebox format4 panel

Format4 tempora F600 with glueBox: PUR-edge banding without glue pot.
Revolutionarily simple, clean and economically highly profitable.

Edgebanding needs to be as quick, easy and efficient as possible. To achieve this, the Format4 tempora models combine the core competences of speed, productivity, flexibility and ease of use in a convincing overall package. The final finishing results when processing both coiled and strip material convince with incredibly high standards.

Modern and optimised edge processing aggregates and a flexible machine body guarantees absolute stability and reliability even at the highest of processing speeds. The user friendly control options, x-motion plus and "m-motion" ensure absolute repeatability and individual configurable operating programs enable quick manual change of the aggregates as well as control via the smartouch control panel. 

The Format4 tempora 60.06 L has a single or dual motor corner rounding unit with a workpiece height of up to 60 mm.

The patented "advantEdge" brings "invisible joints" to your workshop. You can equip your tempora individually with a single or twin-engine corner rounding unit and your desired finishing units on three unit spaces. The intuitive control unit smartouch with 10"or 16" touchscreen ensures maximum operating comfort and highest productivity.

The revolutionary glueBox makes PUR glue processing easier and more convenient than ever before. Heat and water resistance, a very small glue joint as well as reduced glue consumption - all advantages of the PUR-glue can be used uncompromisingly with the glueBox. The PUR drawbacks such as complicated processing, dirty and hardened glue pots, annoying cleaning as well as the complex storage are a thing of the past with glueBox. Instead of the PUR adhesive in the glue pot of edge banding machines, a thin PUR adhesive strip in the glueBox is fused almost invisibly between the edge material and the workpiece. Taking all costs into account (investment, adhesive material consumption and cleaning costs/expenditure), in the effective field of application the glueBox saves approx. 70% in comparison to conventional PUR granulate processing.

FORMAT4. Uncompromising expertise for the highest of requirements

The Felder Group premium brand has met the highest standards of professional users since 2001. The customised high-performance solutions are uncompromisingly innovative, offer maximum operating comfort and complete productivity.

The most important highlights at a glance

edge bander glueBox Format4 Felder Group woodworking


tempora F600 60.06L glueBox
  • Your benefits

tempora F600 60.06L glueBox

tempora F600 60.06L glueBox
edgebanders tempora f600 60.06l gluebox format4 panel
  • Installation length: 191" (4,872 mm)
  • Edge thickness: 0.016"– ½" (⅛") (0.4–6 (3) mm)
  • Workpiece thickness: 3⅜"–2⅜" (8–60 (40) mm)
  • Automation: m-motion and x-motion PLUS 
  • Complete edge processing
  • glueBox PUR-adhesive tape| PUR-edge banding without glue pot.

tempora F600 60.06L

tempora F600 60.06L glueBox
edgebanders tempora f600 60.06l format4 panel
  • Installation length: 173⁶⁄₈" (4,412 mm)
  • Edge thickness: 0.016"–¼" (0.4–6 mm)
  • Workpiece thickness: 3⅜"–2⅜" (8–60 mm)
  • Automation: m-motion and x-motion PLUS 
  • air motion zero joint glue unit
  • Complete edge processing
  • Changeable gluepot with tool free quick change system

... FORMAT4 Premium machines for premium requirements

Edgebander tempora F600 Format4 Felder Group Woodworking
  • Constantly high performance in industrial continuous operation
  • Customer specific optimised production solutions
  • Solid design with premium components
  • Many variations of specification packages with high-tech solutions
  • Complete engineering precision
  • Premium user comfort
  • Award winning design
  • Quality and precision from Austria
  • Uncompromised productivity
  • Perfect service package before, during and after the purchase
  • Tailor made financing solutions


Format4 edgeControl makes operation and adjustment of the tempora edgebanders even easier and more precise.

The values ​​for edge and workpiece thickness that are recorded to the hundredth of a millimetre with the wireless measuring unit are transferred to the machine's smartouch operating unit via Bluetooth (workpiece thickness only with e-motion models). The controller recognises the measured values ​​and sorts them automatically according to workpiece or edge thickness. The operator then selects the desired setting values ​​from the measurement data log that contains the five last measured values. Smartouch automatically calibrates all required units to the exact dimensions.

With edgeControl, production losses due to typing or measuring errors as well as tolerance deviations of the edge dimensions are eliminated.


Easy and careful handling of large-size and surface-sensitive workpieces Placed directly on the machine's infeed ruler and equipped with a 0.75 kW blower motor, a constant air cushion between the machine table and the resting workpiece ensures easy and gentle workpiece feed. The solid table construction with a 1050 x 400 mm supporting surface (with an additional air cushion table expandable to 2000 x 400 mm) and the flexible extendable frame guarantee maximum stability during workpiece feed.


Depending on the application, coiled and strip material from 0.4 up to 6 mm can be glued to panel materials up to 60 mm in thickness.


The new smartouch control unit with 10.4" touch-screen and m-motion control enables a quick and easy selection and control of the aggregate as well as the complete monitoring of all machine functions.

  • Storage and loading of user-defined working programs
  • Selection of the motor-position controlled aggregates
  • Fine-adjustment of the aggregates in the range of 1/100th of a millimetre
  • Intuitive adjustable and self-explanatory display of the aggregates
  • Setting of the glue parameters (EVA or PUR)
  • Order specific selection of the aggregates
  • Fine-adjustment of the distance parameters
  • Maintenance plan, clear text error messages, odometer for total metres of material used

smartouch control unit and network connection reduces the manual settings to a minimum and enables a quick, easy and intuitive selection and control of the aggregate as well as the complete monitoring of all machine functions from the screen. The functions of smartouch include amongst other things:

  • Unlimited memory for user-defined edge programs
  • Maintenance plan, odometer for total metres of material used
  • Simple, self-explanatory representation of the units and their functions
  • Aggregate selection, exact fine adjustment of the motor positionable aggregates (accuracy of up to 1/100 mm) all from the main control panel
  • Glue temperature setting and automatic temperature reduction of the glue whilst in standby mode Now available with a monitor size of 10.4" and 15"
Two counter rotating, activation controlled and individually adjustable premilling units with diamond coated spiral cutters ensure first class edge processing before the material is glued to the edge. With the premilling unit you will achieve tear free edges when processing laminated material. After entering the exact dimensions, the premilling unit executes a perfect edge cut to your panels. The depth of cut can be electronically positioned on all of the e-motion models as standard.

The patented air-motion aggregate from Format4 enables the optical zero joint when processing co-extruded edge and laser edge material. The aggregate is controlled by the workpiece and can be activated and deactivated directly from the control unit. air-motion offers the homogenised optic finish of the workpiece with the panel and edge material, in particular with high gloss material. An edge material suited exactly to the material ensures a zero-joint line and as no time-consuming glue change of various colours is required, you profit from considerably reduced changeover times.

*The air-motion unit is sold in some countries under the name advantEdge


Solid in its design, the first operation controlled motor driven roller presses the edge material on to the workpiece. The application control ensures that there can be no smearing of glue or movement of the edge material whilst processing. The two conical pressure rollers close the glue joint above and below. From the control panel, two pneumatic pressure settings can be selected: Solid strips with less pressure, coiled material with more pressure.

The end trimming unit consists of two independent saw units with high-frequency motors (12,000 rpm). Linear guides ensure maximum precision. The end trimming unit tilts from 0° to 10°. Depending on the equipment, tilting is regulated manually or pneumatically via the control panel (e.g. 10° bevel cut, only forward, only backward when manual, or forward and backward when electronic).

The multifunction trimming unit can trim flush, radius, or bevel edges. The unit consists of two independent trimming units with high frequency motors (12.000 rpm). Linear guides guarantee the highest possible ­precision with little maintenance required. The easy adjustment and setup of the unit, means that it is extremely quick to change between different edge thicknesses and profiles. Depending on the build option chosen, the multi-function unit can be, either adjusted manually, or using electro-motors via the control panel.


No more time consuming post processing of the ­workpiece! The Format4 corner rounding unit finishes workpiece corners (incl. soft forming and post ­forming ­materials) for edging materials from 0.016–⅛” (0.4 to 3.0 mm) thick and 2⅜” (60 mm) in height without reducing the feed rate. The solid cast iron construction, linear guides and tungsten carbide cutters ensure long term precision. The corner rounding unit is controlled via the control panel.

Especially for post and softforming the tempora 60.06L with double motor corner rounding unit enables a new dimension in edgebanding. Workpieces with different profiles can be completed in just a single processing step, the need for time consuming subsequent processing is rendered redundant by the perfect finish.
The radius surface receives a light scraping removing any remnants from the trimming process, ensuring a smooth “finish”. The fine adjustment is manual. The radius scraper unit can be disengaged either manually or pneumatically from the control panel, depending on the model. On all of the e-motion models, the fine adjustment is carried out on the colour touch screen.
The unit is made up of two independent electric motors, which are equipped with cotton brushes. The task of the buffing unit is to clean and polish the top and bottom part of the edge. Superior “­finish” for ABS and PVC edging ­material. On request, the machine can be equipped with spray equipment for the application of a polishing material.
For a perfect surface “finish”. The light scraping function of the surface scraper knives removes all glue residues from the glue bond on the workpiece surface. One more step towards the perfect and completely finished workpiece.
Low consumption guaranteed due to application controlled spray nozzles to apply separation solution for PUR glue, antistatic solution and lubricant for sensitive edging materials and cleaning agents and polish for clean workpieces and a perfect “finish”.
The operation controlled, high quality quartz infrared lamp warms the edge surface in front of the glue unit. This guarantees that the edging adheres to cold workpieces.
The “Nesting” Package optimizes the processing of ­workpieces with cup hinge holes or surfaces with acute angles.

On both of the models (m-motion and x-motion PLUS), the pressure bar is positioned using a hand crank. The position of the pressure beam can be read precisely using the digital counter. 


Variable setting of the depth of cut of the premilling unit. With both equipment options, the settings are carried out manually using an indicator clock. The variable depth of cut can be adjusted and set between 0–0.079" (0–2 mm). 


The puReady nitrogen box makes you flexible in the use of PUR adhesives. In the future you can stay relaxed during production breaks, colour or glue changes. With puReady, your PUR adhesive, stored in nitrogen, remains fresh and processable for a long time. This keeps you flexible in edgebanding and also facilitates the cleaning of the glue pots.

  • Delays reaction processes in the PUR adhesive and thus prolongs the processing time
  • Facilitates and speeds up the cleaning process
  • Increases flexibility when using different PUR colours and PUR adhesives
  • Provides space for the storage of two glue pots
  • Simple operation and clear control displays
  • Mobile and space saving without power- and compressed air connection
  • Compatible with all glue pots of the tempora edge banders F600 / F800

The Format-4 storEdge offers space saving storage of your edge material, replaces the edgebander support plate and can be placed next to the machine as and when required.


The practical edge storage system "storEdge" can be additionally equipped with a support plate.


Your most important edge material, always at hand and stored with ease. - With the optional support plate your edgebander can always be loaded with edge band material.


tempora F600 60.06L glueBox

The glueBox attaches a thin PUR tape between the edge and the workpiece and fuses the two components together almost invisibly. Through heat activation of the glue perfect adhesion is achieved.

  • Fast: Ready to use in only 90 seconds
  • Flexibility: Available in 2 coiled lengths of 25 and 100 meters and in 4 heights of 16, 19, 28 and 40 millimeters
  • Comfort: Tool free PUR tape replacement
  • Efficiency: Almost immediate switching to conventional glue pot for EVA glue and vise versa
edge bander glueBox Format4 Felder Group woodworking

tempora F600 60.06L

The Teflon coated gluepot for PUR or EVA glue has a 1.5 kg capacity and as such around 375 metres of edge material can be applied to a 19 mm panel. The short warm-up time of only 10 minutes guarantees quick operational readiness. As an option, the scraper cleaning unit can be integrated into system which speeds up and facilitates the cleaning when changing between glue types.
Format4® glueBox PUR edge banding without glue pot
Does our revolutionary glueBox live up to its promise?
edgebander tempora family
The puReady nitrogen box makes you flexible in the use of PUR adhesives
FORMAT4 tempora 60.06

Customer service & maintenance

Specially trained service personnel are always available to provide specialised on-site service for you. If the matter is urgent you can call our hotline centre for straightforward immediate help.  Contact our consultants or report your request conveniently online around the clock.

Do you have any questions?

We are happy to advise you online, over the phone or on-site at one of our more than 270 sales and service centres worldwide. 



USA Headquarters | New Castle, Delaware Showroom
2 Lukens Drive, Suite 100-400
New Castle, DE 19720
Tel.: 866-792-5288
Fax: 302-322-9865

Business Hours: Mo. – Fr. | 8am – 5pm (EST)


South Division | Dallas, Texas Showroom
1420 Halsey Way / Suite 100
Carrollton, TX 75007
Tel.: 866-792-5288

Business Hours: Mo. – Fr. | 8am – 5pm (CST)

FELDER GROUP USA West Sacramento

FELDER GROUP USA West Sacramento
West Division | West Sacramento, California Showroom
1747 Enterprise Blvd.
West Sacramento, CA 95691
Tel.: 866-792-5288
Fax: 916-375-3194

Business Hours: Mo. – Fr. | 8am – 5pm (PST)


West Division | Anaheim, California Showroom
3531 E. Miraloma Ave., Unit 1
Anaheim, CA 92806
Tel.: 866-792-5288

Business Hours: Mo. – Fr. | 8am – 5pm (PST)


West Division | Denver, Colorado

Tel.: 866-792-5288

Business Hours: On appointment
Show more