Стрічкопильний верстат з рухомим столом FB 740 S
Стрічкопильний верстат з рухомим столом для по-справжньому складних завдань.
Нові стрічкопильні верстати від Felder з рухомим столом з системою "X-Roll" пропонують значну висоту різання, великі опорні поверхні та змінну швидкість різання для ідеальних результатів у промисловому використанні. Двигун з максимальною потужністю 11 кВт у поєднанні з висотою різання до 620 мм і довжиною рухомого столу від 1550 до 3700 мм забезпечують зручне використання, абсолютну точність і найвищу ефективність. Завдяки змінній швидкості різання, змащенню полотна пили та багатьом іншим системним рішенням, стрічкопильні верстати гарантують ідеальні результати та універсальну застосовність.
Крім деревообробки, стрічкопильні верстати також ідеально підходять для різання фасонних труб у металообробці або для різання ізоляційних матеріалів на підприємствах з обробки пластмас. Зі стрічкопильними верстатами лінійки Heavy Duty від Felder високоточні розрізи змішаних матеріалів, таких як віконні конструкції з деревини й алюмінію, виконуються з винятковими результатами.
Моделі "SW" були спеціально розроблені для безперервної роботи або підвищених навантажень. Більш потужні двигуни забезпечують максимальну продуктивність у промисловому застосуванні, а ширші ролики дозволяють використовувати пили шириною 50-90 мм.
Felder. Уособлення якості і точності
Гарантія бездоганного результату, простоти в експлуатації та абсолютної надійності в регулярному професійному використанні. З 1956 року Felder отримує схвальні відгуки від деревообробників щодо індивідуальних і надійних рішень для малого та середнього бізнесу.
The most important highlights at a glance
Variants
Models- Your benefits
... Обираючи Felder, ви завжди в надійних руках
- Підберемо правильний верстат відповідно до вашого бюджету
- Безпечне рішення для професійного застосування
- Підбір комплектації індивідуально для ваших задач
- Виключно висока якість чавунного столу та агрегатів верстата
- Отримані завдяки 60-річному досвіду інноваційні рішення - навіть у стандартній комплектації
- Найвищі стандарти виробництва та результати обробки
- Інтуїтивно зрозуміле використання
- Сучасний, легко впізнаваний дизайн
- Австрійська якість і точність
- Потужний і продуктивний
- Повний пакет: комплексна сервісна підтримка
Details
The "X-Roll" sliding table guarantees highest precision. Durable guides with the well-proven linear guiding system ensure absolute smooth running due to the roller bearing forced guidance. Due to the solid profile construction the sliding table is completely torsion resistant. Protected from dust and absolutely maintenance-free, the "X-Roll" sliding table ensures perfect woodworking for many years. The 1500, 2050, 2500, 3200 or 3700 mm format sliding table guarantees maximum precision and convenience even when cutting large-dimensioned materials.
The outrigger table with integrated workpiece roller offers maximum support surface for easy feeding of large-sized workpieces. The crosscut fence with coupling system and ergonomic scale or read-off lens on the fence stops guarantees precise adjustment and cross cuts up to 2600 mm. The crosscut fence can be swivelled from 90° - 45° and has a standard fence stop. A fixed reference position is provided at 90°.
The powerful motor with 3x400 V and 50 Hz delivers absolute best performance and outstanding results when processing a wide range of materials.
FB 740 S: 5.5 kW (7.35 kW optional)
FB 740 SW: 7.35 kW (9.2 kW optional)
FB 940 S: 7.35 kW
FB 940 SW: 11 kW
The new bandsaw models are equipped with one upper and one lower table saw blade guide including precision-adjustable side and rear rollers as well as a lockable adjusting screw. The rear roller prevents the blade from being pushed back during cutting, the left and right side roller support the blade when pressure is applied from the side. This is a significant advantage when cutting curves, for example.
The close-fitting guide blocks support the bandsaw blade laterally so that it does not run off even at high cutting heights. The roller on the back of the bandsaw guide stabilizes the blade to the rear. Due to the bronze inserts, the heat generated during cutting is ideally dissipated, thus considerably extending the service life of the bandsaw blades.
The bandsaw guides with ceramic inserts guarantee excellent cutting results and maximum blade stability with four guiding blocks positioned directly adjacent to the saw blade. The flat surface ensures reduced noise emissions and considerably less friction resistance. With reduced friction and less heat generation, ceramic guides are practically wear-resistant and enable an extremely long useable life and consistent cutting quality when compared to conventional roller guides.
The front third of the two solid steel wheels are cambered. Bronze scrapers are fitted in the upper and lower part of the bandsaw to protect it from dirt and ensure high concentricity. Ideal equipment for cutting damp and wet wood, when using lubricants or for working with aluminium, bronze, copper or composite materials.
Optionally the band saw can be equipped with rubber-coated wheels. The elasticity of the rubber coating minimises the occurring loads and as such prevents the blade from moving off its position. It is also possible to use narrower bandsaw blades with crosswise teeth.
The belt lubricating device supplies the bandsaw blade with release agents via a felt pad and thus cleans and protects it from resin and contamination.
With the optionally available, electro-pneumatic belt lubrication device, the release agent is sprayed onto the saw blade against the running direction of the blade via a nozzle. Due to the lubricating and at the same time cooling effect, this is a considerable advantage, especially when processing plastics or metals.
The clamping system allows flat and round components of a diameter of 50 to 600 mm to be clamped on the sliding table. The clamping is done pneumatically, using two clamping jaws that slot into the table groove.
The Felder linear laser for bandsaws makes it possible to project the cutting line of your workpiece and serves as an optical guide when cutting. This makes it possible to align the workpiece in advance and minimises waste. The mounting plate allows the linear laser to be retrofitted on to any bandsaw.
FB 740 S
The variable cutting speed between 320-1120 m/min is particularly recommended when processing light metals and materials that tend to smear during cutting.
The convenient hydraulic blade tensioning system guarantees absolute repeatability due to the precise display of the tension on the pressure gauge. Due to the constant optimum blade tension, you also benefit from a longer service life of the bandsaw blades.
FB 740 SW
The "SW" equipment was specially designed to meet the high demands of non-stop operation or increased loads. The more powerful motors offer maximum performance in industrial applications and the wider rollers allow the use of large bandsaw blades of 50-90 mm width.
The variable cutting speed between 320-1120 m/min is particularly recommended when processing light metals and materials that tend to smear during cutting.
FB 940 S
The variable cutting speed between 320-1120 m/min is particularly recommended when processing light metals and materials that tend to smear during cutting.
The convenient hydraulic blade tensioning system guarantees absolute repeatability due to the precise display of the tension on the pressure gauge. Due to the constant optimum blade tension, you also benefit from a longer service life of the bandsaw blades.
FB 940 SW
The "SW" equipment was specially designed to meet the high demands of non-stop operation or increased loads. The more powerful motors offer maximum performance in industrial applications and the wider rollers allow the use of large bandsaw blades of 50-90 mm width.
Technology Data
Electrical setup
Band Saw Unit
Sliding Tables
General
Important Accessories
Сервіс та підтримка
Do you have any questions?
Showrooms
Felder Group Україна Details
вул. Зелена 149, корпус 4, оф. 304, 305
79035 Львів
Tel.: +38 (032) 242 2075