Wide Belt Sander FW 1352 perform
Classic surface finishing as the focus!
With ultra-modern processing techniques, the furniture industry sets standards so high, that they are almost unachievable for standard cabinetmakers. To remain competitive, workpieces have to be finished to perfection at every stage. The Felder wide belt sanders FW 1102 perform and FW 1352 perform are an affordable introduction to professional woodworking and impress with high-quality system solutions as well as a complete package for precise intermediate lacquer sanding, even in the standard version.
Your advantages at a glance:
- Combination sanding unit with electro-pneumatic segmented sanding pad / Contact roller unit / Sanding pad unit with electro-pneumatic segmented sanding shoe
- Manual or digital grain compensation
- Precise adjustment of the working height in 0.1 mm increments
- Continuous vacuum feed carpet with honeycomb structure for maximum power transmission and workpiece hold
- Pneumatic oscillation control of the sanding belt
- No tools necessary to change the sanding belt
- Intuitive control via 15" smartouch display
- Sanding pad unit or combination sanding unit with variable cutting speed
- Air jet cleaning for sanding belt
FELDER. Quality and precision in a nutshell
Since 1956, a guarantee for perfect results with excellent ease of use and reliability in regular professional use. Woodworkers are always enthusiastic about the individual and solid solutions for small and mid-sized businesses.
... Your decision for Felder, a risk-free decision
- The right machine for every budget
- Complete reliability in professional use
- Tailor made machine solutions
- High quality cast iron machine table and aggregates
- Innovative detail solutions derived from 60 years of experience – already included in the standard configuration
- First class manufacturing and finishing standards
- Intuitive application concepts
- Modern, distinct design
- Quality and precision from Austria
- Powerful and efficient
- Complete package: Comprehensive service support
Details
The clearly structured and intuitive display provides max. productivity. The infeed thickness is clearly shown on the 15" smartouch display and can be adjusted with an accuracy of a tenth of a millimetre.
The individual units of the machine can also be activated or deactivated and the feed speed can be continuously adjusted.
The machine features two processing units - a contact roller unit in the first position and a sanding pad or combination sanding unit in the second position. This means that pre-sanding and fine sanding are possible in only one work step.
The nubbed and continuously vulcanised infeed belt guarantees maximum durability. The continuously adjustable feed speed from 2.5 - 18 m/min ensures optimum adaptation to the material and sanding belt grit at all times. The speed can also be adjusted during the sanding process.
In addition, the machine is equipped with a vacuum feed belt which provides additional support for smooth, small and thin workpieces. The vacuum is generated by a high-pressure fan coupled to the feed and acts on the workpiece via the holes in the feed carpet.
The contact roller unit calibrates workpieces, and thanks to the reduced contact surface greater chip removal of up to 0.5 mm is possible. A grooved, rubberised contact roller with 85° Shore hardness and a diameter of 140 mm is incorporated here for maximum power transfer. On request, we may also install a grooved steel contact roller on your FW 1352 perform.
The combination sanding unit with a grooved and rubberised contact roller in 45° Shore hardness and 140 mm roller diameter can be used for a wide range of sanding applications.
The electro-pneumatically segmented sanding shoe also enables several workpieces to be processed independently of each other for perfect fine, veneer and intermediate lacquer sanding. Because the sanding pad is divided into 27 mm wide segments, it does not always cover the entire working width. Special sensing rollers measure length and width of the workpiece at the machine infeed so that the respective segments can be activated in a process-controlled manner.
On the 2. sanding unit of your FW 1352 an air jet cleaning unit is fitted as standard for the sanding belt. This ensures that the sanding belt remains dust-free and in good working order.
Maximum process reliability guaranteed when setting the working height: As the workpiece is fed into the machine, the workpiece thickness is automatically adjusted by means of fibre optic and laser sensors. The measuring device adjusts the passage height exactly to the material thickness, deducting the desired chip removal.
BCO is a new feature for monitoring the wear of the sanding belt. The operator receives an indication as to which part of the sanding belt is less worn and can therefore feed the workpieces at this point - thus preventing irregular wear of the sanding belt.
The GLP is another new feature which can be added as an option to your wide belt sander. GLP assists in reducing the power consumption and provides the following benefits:
+ speed reduction of the sanding belt between work processes
+ automatic switch-off of the infeed belt
+ automatic signal for valve control of the extraction system
Customer service & maintenance
Do you have any questions?
Showrooms
LEADER F&W CO., LTD. Details
6F, No.9, Ln.72, Sec.2, Changxing Rd., Luzhu Dist.
338020 Taoyuan City
Tel.: 886-3-352-6208
Fax: 886-3-352-6908