Filtern nach:

Produktlinie:

Werkstoff:

Filter anwenden
Spindle Moulders

Tilting Spindle Moulder F 700 M

Scope of application

Vibration free stability for perfect results

With the new F 700 M tilting spindle moulder, Felder is not only offering an affordable solution for all woodworking shops, but also the ideal complement to CNC supported processing. With a solid cast iron table for vibration free stability, you will be ready for every challenge of modern woodworking.

Highlights:

  • Solid cast iron table offering vibration free stability
  • Maximum ease of operation with “Power-Drive”: electrical height and angle adjustment
  • Felder spindle quick change system: quick changeover ensuring maximum productivity 
  • Maximum operating safety: Spindle tilts rearwards from 90°–45°
  • Maintenance free tilting segment guide “Easy-Glide” with 6 year guarantee
  • 230 mm table opening – a particular advantage when panel raising 
  • Reliable repeatability and precise quick settings: The Felder MULTI-adjustment system
  • Dual extraction through both the spindle fence and from under the table – a clean solution

FELDER. Quality and precision in a nutshell

Since 1956, a guarantee for perfect results with excellent ease of use and reliability in regular professional use. Woodworkers are always enthusiastic about the individual and solid solutions for small and mid-sized businesses.

The most important highlights at a glance

... Your decision for Felder, a risk-free decision

  • The right machine for every budget
  • Complete reliability in professional use
  • Tailor made machine solutions
  • High quality cast iron machine table and aggregates
  • Innovative detail solutions derived from 60 years of experience – already included in the standard configuration
  • First class manufacturing and finishing standards
  • Intuitive application concepts
  • Modern, distinct design
  • Quality and precision from Austria
  • Powerful and efficient
  • Complete package: Comprehensive service support

Details

High precision double-sided trunnion support system High load-bearing capacity and operating life Play-free tilt Unaffected by dust Completely maintenance free No lubrication required 6 year guarantee

The Felder 700 Series spindle aggregate sets standards that are unparalleled. 115 mm useable spindle height above the table (140/160 mm) Quick-change system of the moulder spindle Change the speed simply from the front of the machine Collet chuck spindle for router tools with a speed of 15,000 rpm Electrical height adjustment with digital LED display Electrical angle adjustment with digital LED display 4 operating speeds (3500, 6500, 8000, 10,000 rpm) Rearward tilt 0° to 45° Precise, double sided guide support Dovetail guidance system of the height adjustment Excellent vibration absorption from heavy cast iron unit

The fully electrical “Power-Drive” control offers exact adjustment and repeat accuracy. The saw blade height and the angle settings can be adjusted at the turn of a knob, the fine setting adjustments are carried out to tenth of a millimetre accuracy using a push button. Red LED digits display the current position in real time on the control panel.

Your Felder spindle tilts ­“rearward” for operational comfort and the additional following ­reasons: Safety, as there is no pinch point Suitable for any workpiece size Problem-free power feeder application Impeccable machined surface Optimal chip removal

The fence allows tooling of a maximum diameter of 230 mm to be used. The fine adjustment can be set between -5 to +25 mm. The extraction of the chips is done via the integrated extraction connection.

Advantages of the Felder spindle quick change system: Quick, easy change between different types of spindles Ability to use 30, 32, 35, 40, 50 mm and 1¼” diameter spindles Use of the Felder high speed router spindle for router bits or high speed tools at 15,000 rpm. Automatic repeatable setting for series production work

Additional to the parallel guiding of the spindle fence the MULTI-adjustment system also enables The quick adjustment to the tool diameter Automatic repeat setting after removal of your fence Parallel adjustments of the moulder fence Quick and accurate adjustment Measurement scale for depth of cut

The large table opening allows for maximum operator safety. For large dimension tooling, as used for tenoning and panel raising, the cutterblock can be conveniently positioned below the table.

The safety bar guides are great for end-grain work (optional).

The use of a power feeder ensures that standard work when moulding can be carried out cleanly and precisely

The “swing away” power feeder arm provides maximum operating convenience.

Increase the usable surface of your machines with table extensions and additional supports from Felder. These ensure that you can process heavy and large workpieces with ease, without the need of any assistance.

The solid cast iron moulding table is 1200 mm in width, with the large working surface ensuring maximum stabitily. The tried and tested Felder cast iron extensions can also be used when processing larger workpieces to extend the table up to a total length of 2500 mm.

Change routing tools quickly and safely. The "Quick-Lock" clamping system allows a convenient change of cutters on the table router and reduces the risk of injury from slipping. Suitable for Ø 30 mm spindles 

Technology Data

Electrical setup

001
3x 400 V motor voltage
S
002
3x 230 V motor voltage
W
003
1x 230 V, motor power 4.0 HP (3.0 kW)*
O
004
50 Hz
S
005
60 Hz
W
007
5.5 HP (4.0 kW)*
S
008
7.5 HP (5.5 kW)* (!002)
O
009
10.0 HP (7.35 kW)*
O
10
Star-delta start is necessary from 7.5 HP and 3x230V
O
11
Switch for forward and reverse run
O
12
Trigger switch for dust extractor start
O
14
3-phase CEE coupling for additional equipment with time-delayed connection (essential for the use of a power feeder)
O

Spindle Moulder Unit and Spindle Fence

-
Table opening in mm
230
100
Moulder spindle Ø 30 mm, usable height 140 mm
O
101
Moulder spindle Ø 40 mm, usable height 160 mm
O
102
Moulder spindle Ø 50 mm, usable height 160 mm
O
103
Moulder spindle Ø 30 mm, usable height 115 mm
S
104
Moulder spindle Ø 50 mm, usable height 115 mm
O
105
Moulder spindle Ø 1¼”, usable height 115 mm
O
106
Moulder spindle Ø 35 mm, usable height 115 mm
O
107
Moulder spindle Ø 32 mm, usable height 115 mm
O
108
High speed router spindle 15,000 rpm, instead of Ø 30 mm spindle
O
109
Tilting spindle moulder (90°–45°), 3500/6500/8000/10,000 rpm
S
110
Scale for tilting spindle moulder on the hand wheel (!119)
S
112
Spindle moulder fence 230 for max. ­tooling diameter 230 mm, fence plates 400 mm
S
113
MULTI adjustment for spindle fence 230 (#112)
S
116
Aluminium spindle fence plates anodised
S
117
Spindle fence plates anodised with “safety bar guides” (#112)
O
118
Electrical height adjustment of the moulding spindle with LED-display („Power-Drive“ F1) (#110)
S
119
Electrical height and angle adjustment of the spindle moulder with LED display (#201)
O
121
External spindle lock
S
123
EURO Spindle moulder guard
S
125
Safety fence plates “Integral” 500 mm
O
180
1270 mm pull out frame with emergency stop
O
181
2200 mm pull out frame with emergency stop (#182)
O
182
Table extension on both sides 500 mm
O

Through feed

226
Professional power feeder package for production work with the Variofeed 4-2 pillars (#001)
O

General

-
Extractor connection port diameter in mm on spindle moulder fence/below table extraction
120/80
-
Min. transport width in mm (without option 012)
900
-
Weight kg (with standard configuration)
450
-
Working height in mm
890

Important Accessories

212
Swing-away bracket for power feeder
O
215
Moulding device for fixed table moulder
O
223
IPPC
O

Transport

221
Preparation for container
O
S ... Standard equipment O ... Option W ... Choice - ... not available

Customer service & maintenance

Specially trained service personnel are always available to provide specialised on-site service for you. If the matter is urgent you can call our hotline centre for straightforward immediate help.  Contact our consultants or report your request conveniently online around the clock.

Do you have any questions?

We are happy to advise you online, over the phone or on-site at one of our more than 270 sales and service centres worldwide. 

Showrooms

FELDER GROUP Australia in NSW/ACT

FELDER GROUP Australia in NSW/ACT
Unit 1, 125 Russell Street
NSW 2750 Emu Plains
Tel.: (02) 4735 1011
Fax: (02) 4735 8222

Show room open times: Monday – Friday 08:30 – 17:30

Felder VIC Pty Ltd

Felder VIC Pty Ltd
Unit 12, 25-27 Hocking Street
VIC 3058 Coburg North
Tel.: (03) 9018 8346
Fax: (03) 9482 2292

Show room open times: Monday–Tuesday 08:30–17:30 Wednesday–Thursday: By appointment, Friday 08:30–17:30

KR Engineering PTY Ltd.

KR Engineering PTY Ltd.
Unit 1, 10 Wem Lane
Landsdale, 6065 Western Australia
Tel.: (08) 9209 3055
Fax: (08) 9209 3099

Show room open times: Monday – Friday 08:30 – 17:30

FELDER GROUP Australia in QLD/NT

FELDER GROUP Australia in QLD/NT
4/ 14 Buttonwood Place
QLD 4110 Willawong
Tel.: 0418 435 204

Show room open times: Monday – Friday: By appointment.
Show more