Sliding Table Panel Saw K 940 x-motion

The large dimensioned Felder cast iron aggregate offers not only maximum power and precision but also extremely smooth running and efficiency.

Single cast aggregate made from solid cast iron without welding joints.

Stability and safety are considerably increased as a result

133 mm cutting height with a 400 mm saw blade diameter

Electrical height adjustment

Optional: Electronic angle adjustment with digital LED display

Dovetail guidance system of the height adjustment

Maximum power transmission achieved through the Poly-V belts and counter surface

3 speeds: 3,500/4,500/5,500 rpm

Optimal extraction with a completely enclosed saw aggregate

The saw shaft is enclosed in a massive­ cast iron housing. With the double bearing mounts, vibration free results are guaranteed. Power transfer from motor to sawblade is optimised through the use of a Poly-V belt.

It is also possible to use a grooving “Dado cutter” with your Felder K 900 sliding table saw. Especially developed by Felder, the cutter moves like a knife through butter. Massive in size and performance enabling cuts from 6.3– 19.5 mm.

There are two versions available for the operation of the scoring unit: Classic or Automatic. Classic: the height and lateral setting of the scoring blade is adjusted manually from the top of the saw unit table. Automatic: scoring saw blade height adjustment is electrical, and the side adjustment is manual. When the scoring unit is switched on, the scoring blade rises to its pre-set position automatically. When the main blade is switched off, the scoring blade automatically sinks back under the table. First class comfort!

The continuously developed linear guiding system from Felder has been astounding woodworkers since 1990. The high quality­ ­format sliding table guiding ­technology “X-Roll” comes with a 10 year Felder guarantee and offers amazing operating smoothness and is completely maintenance free. The 'x' design of the position of the roller bearings ensures that they move smoothly along hardened guides.

On request we can equip your “900 Series“ with start buttons located directly on the sliding table to turn on the main and scoring blades. How about that for convenience?

The 2600 mm long telescopic crosscut fence can be effortlessly adjusted from 90° to 45°. A mitre scale on the outrigger table enables accurate adjustments. On request, we can equip your outrigger table with the precision mitre pin locating system. Locate your mitre angles accurately time and again! The large crosscut fence stops are constructed in such a way that a small tongue on the stop fits perfectly into a groove on the fence. This keeps the stop firmly in place for both straight and mitered cuts. On request: the digital crosscut stop. For repeatable accuracy to 0.1 mm with large LED display.

The bevelled mitre scale with accurate readout is visible from the operating area, enabling setting of the required crosscut value.

No reading errors due to scales and vernier. No time-wasting with arduous approximations of angle values. The advantage of the Felder degree index is that the stop is set and fixed without losing time or making reading errors. Highly precise index positions allow for the accurate production of polygons, e.g. 5.625º (32 sided), 11.25º (16 sided), 22.5º (8 sided). In addition, index positions at 15º, 20º, 25º, 30º, 35º, 40º and 45º can be used when working in slide to cut or push to cut mode. Every index position is equipped with a length compensator. The highly precise Felder degree index system is adjusted at the factory. Every index position also has individual fine ­adjustment. This cost effective index system integrates well into the machine design and will increase your productivity.

A rip capacity of 800 mm is standard with the option of upgrading to a rip capacity of 1250 mm. The rip scale is easy to read and perfectly integrated into the machine body. The aluminium rip fence can be adjusted along its axis to improve user comfort and safety when making repeated offcuts. The rip fence is easily and smoothly adjustable, with a clamping mechanism which can be engaged with one hand. The fine adjustment mechanism allows for precise measurements.

The electric motor positioned rip fence running on a maintanence free lineal guiding system with ball bearing bushings moves quickly and accurately to within a tenth of a millimeter of the entered cutting width. The rip fence can be tilted away at any point along the full rip length and guarantees perfect cuts with a maximum width of 1250 mm. The operating panel provides you with all of the information relating to the rip fence in real time. Quickly and easily you can enter the required value onto the operating panel, saving time and increasing your productivity.

The integration of the electronic digital display on the rip fence allows for the reading of the cutting width to one tenth of a millimetre. The display can be ­rotated up to 90° to suit the working position. Additional features, such as fine progressive adjustments in increments of 0.1 mm make precision cutting possible.

OUTSTANDING! The patented double mitre gauge from Felder allows for mitre cuts on pieces of differing widths and at any angle. Really easy to use: simply type in the desired angle as well as the widths of your workpieces on the keyboard. Immediately, you will receive the settings and can set the electronic double mitre gauge accordingly. The fence stop on the fence can be adjusted up to 1350 mm with the scale. Regardless of the angles set, the length compensating vernier scale allows you to compensate for the workpiece length.

The patented tilt segment “Easy-Glide” fulfills the highest requirements in businesses and industries. A precise, guided, doublesided support, guarantees maximum load bearing and tolerance free tilting and is absolutely maintenance free. A special, highly durable synthetic material situated in the guide of the tilting segment ensures extremely smooth movement and long-lasting precision. The tilting guide system, a synthetic material tried and tested in aerospace and lock construction, works without the requirement of lubrication and is totally resistant to dust. With a 6 year factory guarantee this Felder component offers reliabilty for many years to come.

CNC-drive control unit with 5.7” (145 mm) TFT screen situated in the overhead control panel

Highest operating safety and maximum flexibility when processing large dimensioned workpieces: the Felder overhead saw guard can be swung away easily and is always there where it is required.

The rip fence is positioned by a motor and runs via a dust-free integrated ball spindle in the saw table. The 1/10 mm precision, the high positioning speed, as well as the simultaneous positioning of the crosscut fence, saw blade height and saw blade angle ensure precision and save valuable working time.

With the “Power-Drive” package you will be able to accurately set both the height and angle of the blade electronically with a turn of a control switch. The saw ­blade height and angle positions are clearly shown on the LED display screens. When the saw blade is tilted the blade height is automatically adjusted and the new height measurement is ­instantly updated.

Highest operating safety and maximum flexibility when processing large dimensioned workpieces: the new Felder overhead saw guard can be swung away easily and is always there where it is required.

A red LED strip immediately signals the operation of the scoring unit and offers even more working safety. (Option)

The clamping system is maintenance free and offers premium comfort for many years: Change saw blades effortlessly in literally no time at all.