Combination Machine CF 741

Large dimensioned and designed for maximum load bearing capacity, the aluminium format sliding table “hovers” on the “X-Roll”, a highly developed guiding technology. The X shape (“X-Roll”) design of the rollers distributes the load optimally on all sides. The linear surface of the steel rollers running on the hardened and ground guiding surface guarantees unbeatable precision and smoothness. “X-Roll” will guarantee you the quality and precision that you expect from your new tilting spindle moulder. Another reason to choose Felder: 10 year factory guarantee to underline the reliability of “X-Roll”.

Exclusive for planer/thicknessers from the Felder Group. The Silent-Power® spiral cutterblock reduces noise emissions by more than half when planing. The continuous pulling cut ensures tear-free results when planing all types of wood. With this revolutionary new development from Format4 you are obtaining all of the advantages of a spiral cutterblock at considerably lower operating, investment and adjustment costs. The advantages of the Silent-Power® cutterblock at a glance ...

• Extremely quiet, noise is reduced by half
• Usable blade life twenty times longer than standard blades
• Four highly precise cutting edges on each knife
• Optimised chip extraction and reduced chip volume
• Tear-free planing results
• Reduced power consumption when compared to similar systems

Click here for more information

Simple blade settings, carried out incredibly quick - accurate to a tenth of a millimetre, standard with FELDER! Resin free locking screws and the self-setting knives make it possible to change the blade in less than 2 minutes. Time consuming adjustments and purchasing of expensive setting gauges are a thing of the past. The advantages at a glance ...

• Quick and effortless knife change
• Self-setting blades for high precision when changing the blades
• No resin buildup on the clamping bolts.
• Quiet operation thanks to enclosed design
• Excellent durability of knife edges

The continuously developed linear guiding system from Felder has been astounding woodworkers since 1990. The high quality­ ­format sliding table guiding ­technology “X-Roll” comes with a 10 year Felder guarantee and offers amazing operating smoothness and is completely maintenance free. The 'x' design of the position of the roller bearings ensures that they move smoothly along hardened guides.

The patented tilt segment “Easy-Glide” fulfills the highest requirements in businesses and industries. A precise, guided, doublesided support, guarantees maximum load bearing and tolerance free tilting and is absolutely maintenance free. A special, highly durable synthetic material situated in the guide of the tilting segment ensures extremely smooth movement and long-lasting precision. The tilting guide system, a synthetic material tried and tested in aerospace and lock construction, works without the requirement of lubrication and is totally resistant to dust. With a 6 year factory guarantee this Felder component offers reliabilty for many years to come.

The FELDER saw unit “104” Manufactured entirely from cast iron, the new Felder “104” saw unit fulfils the highest demands of modern woodworking.

104 mm cutting height with a 315 mm saw blade diameter

Electronic height adjustment of the saw blade (“Power-Drive” K1)

Electrical height and angle adjustment of the saw unit with LED display (“Power-Drive” K2)

Precise height adjustment via precision linear guides

Optimal extraction with a completely enclosed saw aggregate

Large scale, double ball bearing saw arbour

Similarly, the saw blade height and angle settings can be set to an accuracy of a tenth of a millimetre. For fine tuning there is also a push button and a clear LED display screen to show you the actual current value.

Advantages of the Felder spindle quick change system:

Quick, easy change between different types of spindles

Ability to use 30, 32, 35, 40, 50 mm and 1¼” diameter spindles

Use of the Felder high speed router spindle for router bits or high speed tools at 15,000 rpm.

Automatic repeatable setting for series production work

The Felder 700 Series spindle aggregate sets standards that are unparalleled.

115 mm useable spindle height above the table (140/160 mm)

Quick-change system of the moulder spindle

Change the speed simply from the front of the machine

Collet chuck spindle for router tools with a speed of 15,000 rpm

Electrical height adjustment with digital LED display

Electrical angle adjustment with digital LED display

4 operating speeds (3500, 6500, 8000, 10,000 rpm)

Rearward tilt 0° to 45°

Precise, double sided guide support

Dovetail guidance system of the height adjustment

Excellent vibration absorption from heavy cast iron unit

The fully electrical “Power-Drive” control offers exact adjustment and repeat accuracy. The saw blade height and the angle settings can be adjusted at the turn of a knob, the fine setting adjustments are carried out to tenth of a millimetre accuracy using a push button. Red LED digits display the current position in real time on the control panel.

For chip free cutting of laminated panels. The saw blade can be mechanically or electrically driven and can be set in both height and lateral position.

The electronically balanced saw arbor with dual bearing seat system is powered via a Poly-V belt. This combination results in an almost perfect ­transmission of power to the saw blade.

The Felder 700 Series saw unit is fully compatible with dado tooling. Thanks to removable flanges and table insert, the Felder designed, fully adjustable dado cutters can be used.

For a convenient option we can equip your Felder 700 Series machine with start buttons for the main and scoring blades.

The bevelled mitre scale with accurate readout is visible from the operating area, enabling setting of the required crosscut value.

No reading errors due to scales and vernier. No time-wasting with arduous approximations of angle values. The advantage of the Felder degree index is that the stop is set and fixed without losing time or making reading errors. Highly precise index positions allow for the accurate production of polygons, e.g. 5.625º (32 sided), 11.25º (16 sided), 22.5º (8 sided). In addition, index positions at 15º, 20º, 25º, 30º, 35º, 40º and 45º can be used when working in slide to cut or push to cut mode. Every index position is equipped with a length compensator. The highly precise Felder degree index system is adjusted at the factory. Every index position also has individual fine ­adjustment. This cost effective index system integrates well into the machine design and will increase your productivity.

The dual extraction system from the spindle unit and fence ensures that the machine stays clean and dust free.

Thicknessing accuracy to one tenth of a millimeter with the use of the handwheel and its integrated digital display. Max. Thicknessing height 230 mm.

Heavy chip loads are no problem for the chip extraction hood due to its efficient design and large dimension.

The chip removal can be adjusted continuously to up to 4 mm. The magnifying glass guarantees accurate reading of the scale.

The horizontal mortiser is mounted on the planer side. An optional ­dowelling device can be added to increase the mortiser capability.

The large table opening allows for maximum operator safety. For large dimension tooling, as used for tenoning and panel raising, the cutterblock can be conveniently positioned below the table.

The safety bar guides are great for end-grain work (optional).

The fully electrical “Power-Drive” thicknesser table control offers the most precise adjustment and repeat accuracy. With a twist of the knob, you can quickly adjust the thicknessing height, then fine-adjust using the button. An integrated LED-display displays the actual value.

The solid cast iron cutterblock housing is built for heavy duty work. The serrated steel infeed roller and the micro-serrated steel outfeed roller guarantee a perfect transport of the workpiece through the machine. Both steel rollers are large dimensioned and non-wearing. If desired we can equip your AD 941 with a rubber infeed roller. This allows workpieces of varying thicknesses to be processed at the same time, equalling out any differences in thickness. The combination of cutterblock, transport rollers and wood type is decisive for perfect planing resuts. The new Felder AD 941 can be individually configured and specified to meet your exact requirements.

Simple choice for the power feeder speeds of 6 m/min. and 12 m/min.

The space saving planer guard is integrated into the machine chassis which stabilises the workpiece when planing and bevelling.

OUTSTANDING! The patented double mitre gauge from Felder allows for mitre cuts on pieces of differing widths and at any angle. Really easy to use: simply type in the desired angle as well as the widths of your workpieces on the keyboard. Immediately, you will receive the settings and can set the electronic double mitre gauge accordingly. The fence stop on the fence can be adjusted up to 1350 mm with the scale. Regardless of the angles set, the length compensating vernier scale allows you to compensate for the workpiece length.

The use of a power feeder ensures that standard work when moulding can be carried out cleanly and precisely

The Felder device for tilting the feeder away means the power feeder always remains on the machine and can be used at any time with no difficulties.

The planer fence may be tilted to any angle between 90° and 45°. End stops are placed at 90° and 45°.

The rip fence is easy and smooth to adjust, with a single-handed clamping mechanism. The optional fine adjustment makes precise measurements possible. The rip scale is easy to read and perfectly integrated into the machine table.

“230” spindle fence for max. tooling diameter 230 mm, MULTI adjustment system for spindle fence “230” enabling parallel alignment and quick setup

The crosscut fence 1100 mm for crosscuts between +45° and –45°. The fence can be attached to the sliding table without the use of tools. The end stop provides you with the exact 90° position. The bevelled mitre scale with accurate readout is visible from the operating area, enabling setting of the required crosscut value. The large crosscut fence stops are constructed in such a way that a small tongue on the stop fits perfectly into a groove on the fence. This keeps the stop firmly in place for both straight and mitered cuts.

The spindle quick-change system will provide you with almost limitless possibilities of use. You can use spindles with pre-mounted tools for series production, or use spindles with a different diameter. The spindle can be changed in seconds. A particular highlight is the ability to mount a high speed router spindle with 15,000 rpm capability. For maximum stability and durability the Format-4 spindle has been designed with 3 high quality “precision type” bearings!

Aluminium table extension with P-coupling “Single lever” clamping system: fast and simple assembly without tools

Quickest ever conversion from planer to thicknesser by simultaneously lifting the spring-assisted planer tables

The solid outrigger makes it possible to process large and heavy workpieces. High precision and operating smoothness is guaranteed by 8 bearing guide rollers situated in the outrigger telescopic arm. You can optionally equip your Felder saw with a 1100 Felder outrigger or the 1300 professional version. The telescopic crosscut fence with mounting system and ergonomically designed scale with magnifying lens on the crosscut stop guarantees precise settings and crosscuts up to 2600 mm. The crosscut fence can be positioned between 90°-45° and has one crosscut stop as standard. There is a fixed end stop position for 90°.

The solid outrigger makes it possible to process large and heavy workpieces. High precision and operating smoothness is guaranteed by 8 bearing guide rollers situated in the outrigger telescopic arm. You can optionally equip your Felder saw with a 1300 Felder outrigger or the 1500 premium version Optional roller for the outrigger to facilitate the loading of workpieces

On request: the digital crosscut stop. For repeatable accuracy to 0.1 mm with large LED display.

• For rip and formatting cuts of large panel material
• Floor guides are height adjustable, 4.5 m in length, consists of 3 sections