Oscillating Edge Sander Hammer HS 950

Standard features include a workpiece stop. In addition, the mitre fence (part no. 423-043) can also be mounted into the T-slot of the worktable.

On the left side of the machine there is a supplementary table for sanding radii (> 60 mm). The table can also be adjusted in height.

The solid cast iron working table can be conveniently adjusted manually by 150 mm in height. Thus, the sanding belt can be used over the entire height. Together with the oscillation, maximum service life of the sanding belt can be achieved. The table has a T-slot over the entire length of the table.

For oversized workpieces, the sanding surface can be easily increased. The open design allows easy access to the machine.

The sanding unit can be swivelled from 90 degree to table level to 0 degree to table level. There are preset end stops at the stop positions. The set angle can be read on the side swing scale and a grip facilitates the operation.

With the oscillation to be switched on and off, an individual sanding pattern can be generated. Together with the height-adjustable sanding table clean sanding results are ensured and the service life of the sanding paper is increased enormously.