Edgebander tempora F800 60.12 e-motion

Your most important edge material, always at hand and stored with ease. With the optional support plate your edgebander can always be loaded with edge band material.

The practical edge storage system "storEdge" can be additionally equipped with a support plate.

The Format-4 storEdge offers space saving storage of your edge material, replaces the edgebander support plate and can be placed next to the machine as and when required.

Easy and careful handling of large-size and surface-sensitive workpieces Placed directly on the machine's infeed ruler and equipped with a 0.75 kW blower motor, a constant air cushion between the machine table and the resting workpiece ensures easy and gentle workpiece feed. The solid table construction with a 1050 x 400 mm supporting surface (with an additional air cushion table expandable to 2000 x 400 mm) and the flexible extendable frame guarantee maximum stability during workpiece feed.

The 18" smartouch control unit with network connection reduces manual settings to a minimum and enables fast, simple and intuitive selection and control of the aggregates as well as the full monitoring of all machine functions directly from the screen. The smartouch functions include:

• unlimited memory space for customised edgeband programmes
• maintenance schedule, linear metre counter
• very simple, self-explanatory display of all units and functions
• unit selection and precise fine adjustment of the motorised positioning-controlled aggregates (adjustment accuracy 1/100 mm) directly from the control panel
• glue temperature setting and automatic heat reduction of the glue in stand-by mode

Format4 edgeControl makes operation and adjustment of the tempora edgebanders even easier and more precise.

The values ​​for edge and workpiece thickness that are recorded to the hundredth of a millimetre with the wireless measuring unit are transferred to the machine's smartouch operating unit via Bluetooth (workpiece thickness only with e-motion models). The controller recognises the measured values ​​and sorts them automatically according to workpiece or edge thickness. The operator then selects the desired setting values ​​from the measurement data log that contains the five last measured values. Smartouch automatically calibrates all required units to the exact dimensions.

With edgeControl, production losses due to typing or measuring errors as well as tolerance deviations of the edge dimensions are eliminated.

Two counter rotating, activation controlled and individually adjustable premilling units with diamond coated spiral cutters ensure first class edge processing before the material is glued to the edge. With the premilling unit you will achieve tear free edges when processing laminated material. After entering the exact dimensions, the premilling unit executes a perfect edge cut on your panels. The depth of cut can be electronically positioned on all of the e-motion models as standard.

The operation controlled, high quality quartz infrared lamp warms the edge surface in front of the glue unit. This guarantees that the edging adheres to cold workpieces.

The “tempora” edgebander requires only 8 minutes to reach operating temperature. The Teflon laminated gluepot and its tool-free quick change system is suitable for EVA (ethylene vinyl acetate copolymers) and PUR (Polyurethane resin) hot melt adhesive granulates. The fine-adjustable glue roller ensures that the correct amount of glue required is applied and can adapt perfectly to different edge materials.

The patented advantEdge aggregate from Format4 enables the optical zero joint when processing co-extruded edge and laser edge material. The aggregate is controlled by the workpiece and can be activated and deactivated directly from the control unit. advantEdge offers the homogenised optic finish of the workpiece with the panel and edge material, in particular with high gloss material. An edge material suited exactly to the material ensures a zero-joint line and as no time-consuming glue change of various colours is required, you profit from considerably reduced changeover times.

• Process PUR-adhesive longer, more efficient and free of maintenance.
• Airtight construction extends the PUR adhesive durability several times over
• Efficient adhesive application ensures optimum results at low PUR consumption
• No machine downtime when changing the adhesive (from EVA to PUR) thanks to the PUR tank reservoir
• Ideal for processing larger quantities of PUR (2 kg) over a longer period of time
• Very small cleaning effort
• Exclusively for tempora F800 series edge banding machines

Depending on the requirement, coiled material 0.4 to 3.0 mm in thickness and strip material up to 12 mm in thickness can be used for workpieces up to 60 mm in height. An infrared sensor recognises whether edging material is available to be processed. The guillotine scissors for cutting the coiled material are set to a maximum of 3x 64 mm.
The magazine, which automatically feeds the strip material via the pin grip roller, has a capacity of 120 mm. The height settings on the pressure bar and the contact pressure manometer placed next to the edge infeed ensure quick changeover times.

The first pressure roller, which is solid and adjustable, presses the edging material to the workpiece. The adjustable control prevents the glue from smearing and the edging tape from being “squashed”. The two conical pressure rollers complete the glue bond at the top and bottom. Two contact pressure settings can be selected from the control panel: less pressure for when strip material is processed and increased pressure for processing coiled material. Two pneumatic contact pressure settings can be selected from the control panel: a strip cylinder with low pressure and a roller cylinder with high pressure. All e-motion models have an electro­nically positionable pressure roller unit as standard.

The end trimming unit consists of two inde­pendent saw units with high-frequency motors (12,000 rpm). Linear guides ensure maximum precision. The end trimming unit tilts from 0° to 15°. Depending on the machine specification, tilting is regulated manually or pneumatically via the control panel (e.g. 15° bevel cut, front only, rear only or front and rear).

The multi-functional flush, radius and thin-edge bevel trimming unit consists of two independent trimming units with high frequency motors (12,000 rpm). Linear guides guarantee the highest possible precision with little maintenance required. The easy adjustment and setup of the unit means that it is extremely quick to change between different edge thicknesses and profiles. Depending on the equipment option chosen, the multifunctional trimming unit can either be adjusted manually or pneumatically, controlled via the control panel. On all of the e-motion models, the setting of the electronically positionable units is carried out on the colour touch screen.

The “Nesting” Package optimises the processing of workpieces with hinge borings or surfaces with acute angles.

No more time consuming postprocessing of the workpiece! The Format4 corner rounding unit provides the perfect "finish" of workpiece corners (for both softforming and postforming materials) for edge materials from 0.4 mm to 3.0 mm and a processing height of 60 mm and a feed speed from 12 m/min. The solid cast iron construction, linear guides and a high-quality spindle with a starting clutch ensure long-term precision. The corner rounding unit is controlled from the control panel, naturally with the option of choosing which corners need to be rounded (only on the front of the workpiece, only on the back, or both on the front and on the back).

The new grooving unit in the “tempora 60.12” ensures even greater productivity. It has a vertical function for back grooves and a horizontal function for tongue-and-groove joints - no need to use a spindle moulder on the workpiece. The type of function, (vertical or horizontal), can be manually set in just a few seconds. The settings for groove position and groove depth (0–15 mm) can easily be selected from the colour touchscreen with a 1/100 mm accuracy. Special grooving saw blades are used according to the desired groove depth (4–7.5 mm)

The radius surface receives a light scraping, removing any remnants from the trimming process and ensuring a smooth “finish”. The fine adjustment is manual. The radius scraper unit can be disengaged either manually or pneumatically from the control panel, depending on the model. On all of the e-motion models, the fine adjustment is carried out on the colour touch screen.

For a perfect surface finish. The light scraping function of the surface scraper knives removes all glue residues from the glue bond on the work­piece surface. One more step towards the perfect and completely finished workpiece.

Low consumption guaranteed due to application controlled spray nozzles to apply separation solution for PUR glue, antistatic solution and lubricant for sensitive edging materials and cleaning agents and polish for clean workpieces and a perfect “finish”.

The unit is made up of two independent electric motors, which are equipped with cotton brushes. The task of the buffing unit is to clean and polish the top and bottom part of the edge. The buffing unit gives a super finish for ABS and PVC edging material. The machine can, on request, be equipped with spraying equipment to apply polish onto the workpiece.

The puReady nitrogen box makes you flexible in the use of PUR adhesives. In the future you can stay relaxed during production breaks, colour or glue changes. With puReady, your PUR adhesive, stored in nitrogen, remains fresh and processable for a long time. This keeps you flexible in edgebanding and also facilitates the cleaning of the glue pots.

• Delays reaction processes in the PUR adhesive and thus prolongs the processing time
• Facilitates and speeds up the cleaning process
• Increases flexibility when using different PUR colours and PUR adhesives
• Provides space for the storage of two glue pots
• Simple operation and clear control displays
• Mobile and space saving without power- and compressed air connection
• Compatible with all glue pots of the tempora edge banders F600 / F800