Operating panel with LCD display and keypad
Your productivity as the focus
The entry level machine for professional edge processing combines top class performance and quality with a minimum space requirement and maximum price performance ratio.
Exact workpiece feed speed, centralised control panel with LCD display and high quality aggregates guarantee maximum productivity and perfect results.
... Your decision for Felder, a risk-free decision
Quick and accurate adjustment of the panel thickness.
The Teflon coated glue pot has a capacity of 2 kg PVA hot melt adhesive granulate (ethylene vinyl acetate copolymers). The machine is ready to operate after only 12 minutes! The fine adjustment of the glue roller ensures that the correct amount of hot glue is applied to the differing types of edging material. PUR (Polyurethane resin) hot melt adhesive granulate may be used in accordance with the glue manufacturer‘s processing guidelines.
Pre-cutting of ABS and PVC edge material up to a thickness of 3 mm (⅛”).
The pressure rollers consists of a large cylindrical roller and two additional pressure rollers as standard. These 2 secondary pressure rollers are conical and thereby apply increased pressure on both the upper and lower surface of the edging material. This spring loaded system ensures a perfect bond between edging material and workpiece.
The highly precise linear guides ensure that the twin saw blade cutting unit executes clean cuts. The end cutting saw blades traverse at 45°, ensuring that the cut is tear free. It is possible to set a 20° bevel cut to trim thin edges.
It is quick and easy to switch between flush trimming, radius trimming and beveled cuts for thin edges. The newly developed system ensures balanced edge tolerances and prevents setup mistakes. Two independent high-frequency motors with special spindles ensure perfect milling results with any edging material. The machine is equipped with ⅛” (2 mm) radius cutters. The machine can be equipped with ⅛” (3 mm) radius cutters upon request.
Fine tunes the edge radius as well as removing excess glue.
The manually selectable scraper knives ensure a perfect “finish” on the workpiece surface.
Excellent finish for ABS and PVC material. Optional installation of spray nozzles for application of polishing spray, prior to buffing.