Пильно-фрезерний верстат КF 700 S Professional

pilno-frezerni verstati kf 700 s professional felder wood panel
Select model
pilno-frezerni verstati kf 700 s professional felder wood panel
КF 700 S Professional
Available immediately Now customisable
Book now Secure at promotional price
pilno-frezerni verstati kf 700 professional felder wood panel
КF 700 Professional
Available immediately Now customisable
Book now Secure at promotional price
pilno-frezerni verstati kf 700 felder wood panel
КF 700
Available immediately Now customisable
Book now Secure at promotional price
pilno-frezerni verstati kf 700 s professional felder wood panel

Два професійних верстата в одному

Форматно-розкрійний і фрезерний з похилим шпинделем – Felder об’єднав два високоякісні професійні деревообробні верстати, створивши неперевершену комбінацію - пильно-фрезерний верстат KF 700.  Інновації в поєднанні з перевіреними часом технологіями Felder та досконалі компоненти для ідеальних результатів обробки деревини – відповідь на будь-який виклик. Індивідуальний підбір комплектації, швидке переналаштування та точна повторюваність операцій є переконливими характеристиками для представників малого, середнього і великого бізнесу. 

Моделі KF 700 і KF 700 Professional з рухомими столами довжиною 1300, 1550, 2050 або 2500 мм, а також аутригерними столами з довжиною 1100 і 1300 мм пропонують достатньо місця для легкої подачі та зручної обробки великих заготовок. Для найвищих вимог і максимальної робочої площі K 700 S у якості опції пропонує форматні рухомі столи з довжиною 2500 або 2800 і 3200 мм, а також аутригерний стіл до 1500 мм.

Опція системи керування "Power-Drive" для точного налаштування та повторюваності операцій забезпечує комфорт експлуатації преміум-класу. Висоту і кут пили та шпинделя з точністю до однієї десятої міліметра можна швидко налаштувати та перевірити на світлодіодному дисплеї.

Felder. Уособлення якості і точності

Гарантія бездоганного результату, простоти в експлуатації та абсолютної надійності в регулярному професійному використанні. З 1956 року Felder отримує схвальні відгуки від деревообробників щодо індивідуальних і надійних рішень для малого та середнього бізнесу. 

The most important highlights at a glance

8747-fraesspindel-schnellwechselsystem.png
1107-8743-9022-praezisionsfuerhungssystem.png
1622-powerdrive.png

Variants

Models
КF 700 S Professional
  • Your benefits

КF 700 S Professional

КF 700 S Professional
pilno-frezerni verstati kf 700 s professional felder wood panel
  • Довжина різання: 2500-3200 мм
  • Ширина різу: 800–1250 мм
  • Висота різання: 104 мм
  • Відкриття столу: 230 мм
  • Фрезерний упор для інструменту з макс. діаметром: 230 мм
  • Система швидкої зміни фрезерного шпинделя - стандартна
0

КF 700 Professional

КF 700 S Professional
pilno-frezerni verstati kf 700 professional felder wood panel
  • Довжина різання: 2050-2500 мм
  • Ширина різу: 800–1250 мм
  • Висота різання: 104 мм
  • Відкриття столу: 230 мм
  • Фрезерний упор для інструменту з макс. діаметром: 230 мм
  • Система швидкої зміни фрезерного шпинделя - стандартна
1

КF 700

КF 700 S Professional
pilno-frezerni verstati kf 700 felder wood panel
  • Довжина різання: 1300-2500 мм
  • Ширина різу: 800–1250 мм
  • Висота різання: 104 мм
  • Відкриття столу: 230 мм
  • Фрезерний упор для інструменту з макс. діаметром: 230 мм
  • Система швидкої зміни фрезерного шпинделя - стандартна
2

... Обираючи Felder, ви завжди в надійних руках

3215-kreissaegefraesmaschine-kf700sprofessional-felder-feldergroup.png
  • Підберемо правильний верстат відповідно до вашого бюджету
  • Безпечне рішення для професійного застосування
  • Підбір комплектації індивідуально для ваших задач
  • Виключно висока якість чавунного столу та агрегатів верстата 
  • Отримані завдяки 60-річному досвіду інноваційні рішення - навіть у стандартній комплектації
  • Найвищі стандарти виробництва та результати обробки 
  • Інтуїтивно зрозуміле використання
  • Сучасний, легко впізнаваний дизайн
  • Австрійська якість і точність
  • Потужний і продуктивний
  • Повний пакет: комплексна сервісна підтримка

Details

The FELDER saw unit “104” Manufactured entirely from cast iron, the new Felder “104” saw unit fulfils the highest demands of modern woodworking.
  • 104 mm cutting height with a 315 mm saw blade diameter
  • Electronic height adjustment of the saw blade (“Power-Drive” K1)
  • Electrical height and angle adjustment of the saw unit with LED display (“Power-Drive” K2)
  • Precise height adjustment via precision linear guides
  • Optimal extraction with a completely enclosed saw aggregate
  • Large scale, double ball bearing saw arbour
  • 64688_64689_kreissaegeaggregat_2.png
    The patented tilt segment “Easy-Glide” fulfills the highest requirements in businesses and industries. A precise, guided, doublesided support, guarantees maximum load bearing and tolerance free tilting and is absolutely maintenance free. A special, highly durable synthetic material situated in the guide of the tilting segment ensures extremely smooth movement and long-lasting precision. The tilting guide system, a synthetic material tried and tested in aerospace and lock construction, works without the requirement of lubrication and is totally resistant to dust. With a 6 year factory guarantee this Felder component offers reliabilty for many years to come.
    1616-1659-easyglide.png
    The electronically balanced saw arbor with dual bearing seat system is powered via a Poly-V belt. This combination results in an almost perfect ­transmission of power to the saw blade.
    8752-kreissaegewelle.png
    The Felder 700 Series saw unit is fully compatible with dado tooling. Thanks to removable flanges and table insert, the Felder designed, fully adjustable dado cutters can be used.
    8753-nutarbeiten.png
    Similarly, the saw blade height and angle settings can be set to an accuracy of a tenth of a millimetre. For fine tuning there is also a push button and a clear LED display screen to show you the actual current value.
    1622-powerdrive.png
    For chip free cutting of laminated panels. The saw blade can be mechanically or electrically driven and can be set in both height and lateral position.
    8751-vorritzaggregat.jpg
    The continuously developed linear guiding system from Felder has been astounding woodworkers since 1990. The high quality­ ­format sliding table guiding ­technology “X-Roll” comes with a 10 year Felder guarantee and offers amazing operating smoothness and is completely maintenance free. The 'x' design of the position of the roller bearings ensures that they move smoothly along hardened guides.
    1107-8743-9022-praezisionsfuerhungssystem.png
    The fence allows tooling of a maximum diameter of 230 mm to be used. The fine adjustment can be set between -5 to +25 mm. The extraction of the chips is done via the integrated extraction connection.
    8506-fraesanschlag.png
    For a convenient option we can equip your Felder 700 Series machine with start buttons for the main and scoring blades.
    1639-schaltstelle.png

    Highest operating safety and maximum flexibility when processing large dimensioned workpieces: the Felder overhead saw guard can be swung away easily and is always there where it is required.

    1680-oberschutz.png
    The rip capacity comes at 800 mm or optional 1250 mm. The rip fence almost hovers over the table. The single handed quick clamping and fine adjusment systems ensure quick and accurate setting of the rip fence. The easy to read rip scale is perfectly integrated into the saw table. The aluminium rip fence plate can be moved backwards to optimise the feed of workpieces. When working with narrow and thin cuts of wood or with the saw blade tilted, it can be inverted and used in the lying position.
    8744-parallelanschlag.png
    The rip fence can be fitted with an electronic digital display. The perfect integration of the electronic unit allows you to turn the display around 90°, so the values can be clearly seen and read from the operating area. Additional functions such as the input of incremental measurements make your daily working life easier.
    8746-elektronische-digitalanzeige.png
    Increase your working surface area as needed – Felder System Table Extensions Since their invention in 1969, Felder system table extensions have become a very common and useful choice for many Felder owners. Within seconds and without the use of tools, you are able to increase the working surface of your Felder.
    1690-tischverlaengerung.png
    The Felder 700 Series spindle aggregate sets standards that are unparalleled.
  • 115 mm useable spindle height above the table (140/160 mm)
  • Quick-change system of the moulder spindle
  • Change the speed simply from the front of the machine
  • Collet chuck spindle for router tools with a speed of 15,000 rpm
  • Electrical height adjustment with digital LED display
  • Electrical angle adjustment with digital LED display
  • 4 operating speeds (3500, 6500, 8000, 10,000 rpm)
  • Rearward tilt 0° to 45°
  • Precise, double sided guide support
  • Dovetail guidance system of the height adjustment
  • Excellent vibration absorption from heavy cast iron unit
  • 8748-fraesaggregat700.png
    Large dimensioned and designed for maximum load bearing capacity, the aluminium format sliding table “hovers” on the “X-Roll”, a highly developed guiding technology. The X shape (“X-Roll”) design of the rollers distributes the load optimally on all sides. The linear surface of the steel rollers running on the hardened and ground guiding surface guarantees unbeatable precision and smoothness. “X-Roll” will guarantee you the quality and precision that you expect from your new tilting spindle moulder. Another reason to choose Felder: 10 year factory guarantee to underline the reliability of “X-Roll”.
    1372-zapfenundschlitzen.png
    The fully electrical “Power-Drive” control offers exact adjustment and repeat accuracy. The saw blade height and the angle settings can be adjusted at the turn of a knob, the fine setting adjustments are carried out to tenth of a millimetre accuracy using a push button. Red LED digits display the current position in real time on the control panel.
    Your Felder spindle tilts ­“rearward” for operational comfort and the additional following ­reasons:
  • Safety, as there is no pinch point
  • Suitable for any workpiece size
  • Problem-free power feeder application
  • Impeccable machined surface
  • Optimal chip removal
  • 1626-fraesspindelschwenkung.png
    Advantages of the Felder spindle quick change system:
  • Quick, easy change between different types of spindles
  • Ability to use 30, 32, 35, 40, 50 mm and 1¼” diameter spindles
  • Use of the Felder high speed router spindle for router bits or high speed tools at 15,000 rpm.
  • Automatic repeatable setting for series production work
  • 8747-fraesspindel-schnellwechselsystem.png
    The large table opening allows for maximum operator safety. For large dimension tooling, as used for tenoning and panel raising, the cutterblock can be conveniently positioned below the table.
    8771-fraestischoeffnung.png
    The safety bar guides are great for end-grain work (optional).
    8763-sicherheitslineale.png
    The use of a power feeder ensures that standard work when moulding can be carried out cleanly and precisely
    The Felder device for tilting the feeder away means the power feeder always remains on the machine and can be used at any time with no difficulties.
    1702-abklappvorrichtung.png
  • Easy clamping of workpieces with maximum flexibility, can be used on all panel saws and spindle moulders that have a sliding table
  • Easy set up due to magnetic fittings
  • Safety cylinder ensures maximum working safety
  • Pressure bar function is possible with every sliding table length
  • Locking height 95 mm
  • Clamping force approx. 300 kg
  • OUTSTANDING! The patented double mitre gauge from Felder allows for mitre cuts on pieces of differing widths and at any angle. Really easy to use: simply type in the desired angle as well as the widths of your workpieces on the keyboard. Immediately, you will receive the settings and can set the electronic double mitre gauge accordingly. The fence stop on the fence can be adjusted up to 1350 mm with the scale. Regardless of the angles set, the length compensating vernier scale allows you to compensate for the workpiece length.
    1694-egl.png

    КF 700 S Professional

    The solid outrigger makes it possible to process large and heavy workpieces. High precision and operating smoothness is guaranteed by 8 bearing guide rollers situated in the outrigger telescopic arm. You can optionally equip your Felder saw with a 1300 Felder outrigger or the 1500 premium version Optional roller for the outrigger to facilitate the loading of workpieces
    No reading errors due to scales and vernier. No time-wasting with arduous approximations of angle values. The advantage of the Felder degree index is that the stop is set and fixed without losing time or making reading errors. Highly precise index positions allow for the accurate production of polygons, e.g. 5.625º (32 sided), 11.25º (16 sided), 22.5º (8 sided). In addition, index positions at 15º, 20º, 25º, 30º, 35º, 40º and 45º can be used when working in slide to cut or push to cut mode. Every index position is equipped with a length compensator. The highly precise Felder degree index system is adjusted at the factory. Every index position also has individual fine ­adjustment. This cost effective index system integrates well into the machine design and will increase your productivity.
    1032-1643-1644-winkeleinstellung.png
    On request: the digital crosscut stop. For repeatable accuracy to 0.1 mm with large LED display.
    8745-ablaengenanschlag.jpg
    • For rip and formatting cuts of large panel material
    • Floor guides are height adjustable, 4.5 m in length, consists of 3 sections
    1691-auslegertisch-mit-bodenstuetzrolle.png

    КF 700 Professional

    The solid outrigger makes it possible to process large and heavy workpieces. High precision and operating smoothness is guaranteed by 8 bearing guide rollers situated in the outrigger telescopic arm. You can optionally equip your Felder saw with a 1100 Felder outrigger or the 1300 professional version. The telescopic crosscut fence with mounting system and ergonomically designed scale with magnifying lens on the crosscut stop guarantees precise settings and crosscuts up to 2600 mm. The crosscut fence can be positioned between 90°-45° and has one crosscut stop as standard. There is a fixed end stop position for 90°.
    No reading errors due to scales and vernier. No time-wasting with arduous approximations of angle values. The advantage of the Felder degree index is that the stop is set and fixed without losing time or making reading errors. Highly precise index positions allow for the accurate production of polygons, e.g. 5.625º (32 sided), 11.25º (16 sided), 22.5º (8 sided). In addition, index positions at 15º, 20º, 25º, 30º, 35º, 40º and 45º can be used when working in slide to cut or push to cut mode. Every index position is equipped with a length compensator. The highly precise Felder degree index system is adjusted at the factory. Every index position also has individual fine ­adjustment. This cost effective index system integrates well into the machine design and will increase your productivity.
    1032-1643-1644-winkeleinstellung.png
    • For rip and formatting cuts of large panel material
    • Floor guides are height adjustable, 4.5 m in length, consists of 3 sections
    1691-auslegertisch-mit-bodenstuetzrolle.png
    Additional to the parallel guiding of the spindle fence the MULTI-adjustment system also enables
  • The quick adjustment to the tool diameter
  • Automatic repeat setting after removal of your fence
  • Parallel adjustments of the moulder fence
  • Quick and accurate adjustment
  • Measurement scale for depth of cut
  • КF 700

    The crosscut fence 1100 mm for crosscuts between +45° and –45°. The fence can be attached to the sliding table without the use of tools. The end stop provides you with the exact 90° position. The bevelled mitre scale with accurate readout is visible from the operating area, enabling setting of the required crosscut value. The large crosscut fence stops are constructed in such a way that a small tongue on the stop fits perfectly into a groove on the fence. This keeps the stop firmly in place for both straight and mitered cuts.
    1614-ablaenganschlag.jpg
    Additional to the parallel guiding of the spindle fence the MULTI-adjustment system also enables
  • The quick adjustment to the tool diameter
  • Automatic repeat setting after removal of your fence
  • Parallel adjustments of the moulder fence
  • Quick and accurate adjustment
  • Measurement scale for depth of cut
  • Aluminium table extension with P-coupling “Single lever” clamping system: fast and simple assembly without tools
    1634-tischverbreiterung.png

    Technology Data

    Electrical setup

    КF 700
    КF 700 Professional
    КF 700 S Professional
    001
    3x 400 V motor voltage
    S
    S
    S
    002
    3x 230 V motor voltage
    W
    W
    W
    003
    1x 230 V, motor power 4.0 HP (3.0 kW)*
    O
    O
    O
    004
    50 Hz
    S
    S
    S
    005
    60 Hz
    W
    W
    W
    006
    4.0 HP (3.0 kW)*
    S
    S
    -
    007
    5.5 HP (4.0 kW)*
    O
    O
    S
    008
    7.5 HP (5.5 kW)*
    O
    O
    O
    009
    10.0 HP (7.30 kW) Power ratio S6/40%*
    O
    O
    O
    10
    Star-delta start is necessary from 7.5 HP and 3x230V
    O
    O
    O
    11
    Switch for forward and reverse run
    S
    S
    S
    12
    Trigger switch for dust extractor start
    O
    O
    O
    14
    3-phase CEE coupling for additional equipment with time-delayed connection (essential for the use of a power feeder)
    O
    O
    O

    Saw and Scoring Unit

    КF 700
    КF 700 Professional
    КF 700 S Professional
    69
    Sliding table saw with tilting saw blade (90°–45°), maximum cutting height 104 mm with a 315 mm saw blade, 4800 rpm
    S
    S
    S
    201
    Electrical height and angle adjustment of the saw unit with LED display (#119)
    O
    O
    O
    71
    Digital indicator on handwheel for saw tilt
    O
    O
    O
    82
    Preparation for Dado tooling up to 19.5 mm in width
    O
    O
    O
    84
    Micro adjustable rip fence
    O
    O
    O
    85
    Digital display for rip fence with fine adjustment (!77)
    O
    O
    O
    86
    Digital display for rip fence with fine adjustment (#77)
    O
    O
    O
    74
    Mechanical scoring unit, dia. 3⅞” (100 mm) with main saw blade 11¾” (300 mm)
    O
    O
    O
    23
    1x 230 V electronically controlled scoring unit, 100 mm with a 300 mm main saw blade (#003)
    O
    O
    O
    75
    Electronic scoring unit, dia. 100 mm with main saw blade 300 mm
    O
    O
    O
    78
    800 mm rip capacity, min. transport width 800 mm
    S
    S
    -
    76
    Cutting width 800 mm with full table, min. transport width 800 mm
    O
    O
    S
    77
    Rip capacity 1250 mm, min. transport width 800 mm
    O
    O
    O
    91
    Extractor hose mounting for rip capacity 800/1250 mm
    O
    O
    O
    80
    Saw guard EURO II
    S
    S
    S
    81
    Overhead saw guard for 800/1250 mm cutting width, swings away from the working area
    O
    O
    O

    Spindle Moulder Unit and Spindle Fence

    КF 700
    КF 700 Professional
    КF 700 S Professional
    109
    Tilting spindle moulder (90°–45°), 3500/6500/8000/10,000 rpm
    S
    S
    S
    -
    Table opening in mm
    230
    230
    230
    118
    Electrical height adjustment of the moulding spindle with LED-display („Power-Drive“ F1) (#110)
    O
    O
    O
    119
    Electrical height and angle adjustment of the spindle moulder with LED display (#201)
    O
    O
    O
    110
    Scale for tilting spindle moulder on the hand wheel (!119)
    O
    O
    O
    109
    Manual spindle tilt 90°–45°
    S
    S
    S
    103
    Moulder spindle Ø 30 mm, usable height 115 mm
    S
    S
    S
    107
    Moulder spindle Ø 32 mm, usable height 115 mm
    O
    O
    O
    106
    Moulder spindle Ø 35 mm, usable height 115 mm
    O
    O
    O
    104
    Moulder spindle Ø 50 mm, usable height 115 mm
    O
    O
    O
    105
    Moulder spindle Ø 1¼”, usable height 115 mm
    O
    O
    O
    100
    Moulder spindle Ø 30 mm, usable height 140 mm
    O
    O
    O
    101
    Moulder spindle Ø 40 mm, usable height 160 mm
    O
    O
    O
    102
    Moulder spindle Ø 50 mm, usable height 160 mm
    O
    O
    O
    108
    High speed router spindle 15,000 rpm, instead of Ø 30 mm spindle
    O
    O
    O
    112
    Spindle moulder fence 230 for max. ­tooling diameter 230 mm, fence plates 400 mm
    S
    S
    S
    123
    EURO Spindle moulder guard
    S
    S
    S
    113
    MULTI adjustment for spindle fence 230 (#112)
    O
    S
    S
    115
    Aluminium spindle fence plates
    S
    -
    -
    116
    Aluminium spindle fence plates anodised
    O
    S
    S
    117
    Spindle fence plates anodised with “safety bar guides” (#112)
    O
    O
    O
    125
    Safety fence plates “Integral” 500 mm
    O
    O
    O

    Sliding Tables

    КF 700
    КF 700 Professional
    КF 700 S Professional
    131
    Dimension sliding table M, cutting length 1300 mm**
    S
    -
    -
    141
    Dimension sliding table, cutting length 1550 mm**
    O
    -
    -
    132
    Dimension sliding table L, cutting length 2050 mm**
    O
    S
    -
    133
    Dimension sliding table F, cutting length 2500 mm(98"), anodised** with edging shoe
    O
    O
    S
    136
    Dimension sliding table anodised
    O
    S
    S
    139
    On and off switch on the sliding table
    O
    O
    O
    134
    Dimension sliding table X, cutting length 2800 mm(110"), anodised** with edging shoe
    -
    -
    O
    135
    Dimension sliding table XL, cutting length 3200 mm(126"), anodised** with edging shoe
    -
    -
    O

    Outrigger Tables and Crosscut Fences

    КF 700
    КF 700 Professional
    КF 700 S Professional
    159
    1100 mm Outrigger table for 1300–2050 mm sliding tables
    O
    S
    -
    160
    1300 mm Outrigger table for 1300–2500 mm sliding talbes
    O
    O
    S
    164
    Crosscut fence 1100 mm(43") for all sliding tables
    S
    O
    O
    165
    Telescopic extension for crosscut fence 1100 mm(43") to 2000 mm(78") (#164)
    O
    O
    O
    166
    Crosscut fence 2600 mm for outrigger table (#159/160)
    O
    S
    S
    168
    Crosscut fence 2600 mm for outrigger table, X-Roll system instead of crosscut fence 1100 mm (#159/160)
    O
    -
    -
    169
    Crosscut fence 3200 mm for outrigger table, X-Roll system with 2 crosscut stops instead of crosscut fence 2600 mm (#166/168+159/160)
    O
    O
    O
    170
    Precision mitre unit with pin locating system for outrigger table crosscut fence
    O
    O
    O
    173
    Precision mitre guide with cutting length compensation for 1300/1500 outrigger
    O
    O
    O
    161
    1500 mm Outrigger table for 2500–3700 mm sliding tables
    -
    -
    W
    171
    Digital cross cut stop 1900 mm(74"), 1 digital fence stop, extendable to 3200 mm(126") for outrigger 1500
    -
    -
    O
    172
    Outrigger digital cross cut stop 3200 mm(126"), 2 digital fence stops, for outrigger table 1500
    -
    -
    O

    General

    КF 700
    КF 700 Professional
    КF 700 S Professional
    -
    Working height in mm
    890
    890
    890
    -
    Min. transport width in mm
    800
    800
    800
    -
    Extractor connection port diameter in mm on overhead saw guard
    120/50 (80)
    120/50 (80)
    120/50 (80)
    -
    Extractor connection port diameter in mm on spindle moulder fence/below table extraction
    120/80
    120/80
    120/80
    -
    Weight kg (with standard configuration)
    570
    640
    780

    Important Accessories

    КF 700
    КF 700 Professional
    КF 700 S Professional
    210
    Rolling carriage (410-160)
    O
    O
    O
    212
    Tilting bracket for power feed
    O
    O
    O
    223
    IPPC
    O
    O
    O

    Transport

    КF 700
    КF 700 Professional
    КF 700 S Professional
    221
    Preparation for container
    O
    O
    O
    S ... Standard equipment O ... Option W ... Choice - ... not available

    Сервіс та підтримка

    Спеціально навчений сервісний персонал завжди готовий надати вам професійне обслуговування на місці. Якщо справа невідкладна, ви можете зателефонувати на нашу гарячу лінію, щоб отримати миттєву допомогу.  Телефонуйте на номер сервісної підтримки або залиште запит на нашому сайті.
    feldergroup-contact-us.png

    Do you have any questions?

    We are happy to advise you online, over the phone or on-site at one of our more than 270 sales and service centres worldwide. 

    Showrooms

    Felder Group Україна

    Felder Group Україна
    вул. Зелена 149, корпус 4, оф. 304, 305
    79035 Львів
    Tel.: +38 (032) 242 2075