CNC Machining Centres

Mesin Nesting menggunakan CNC profit H08

Scope of application
Get free quote Video Callback service LIVE-DEMO Personal consultation Contact
cnc machining centres profit h08 format4 c-tech panel plastic

CNC Nesting, efisiensi dalam tempat terkecil

profit H08 dari Format4 adalah mesin-mesin yang menggunakan CNC untuk pengaplikasian nesting profesional dengan tempat terkecil  design yang dikhususkan untuk kegunaan universal, presisi dan produktifitas yang tinggi tercapai ketika pemrosesan beragam material secara khusus. Hal ini yang membuat kesan tersendiri pada mesin serba bisa yang membuat keuntunganCepat dan sederhana: pemrosesan panel standar dalam tempat terkecil 

Efisiensi tiada tanding untuk kayu, plastik, panel komposit alumunium dan plasterboard
Portal desain dengan drive "Gantry": cepat, presisi dan perawatan yang sedikit
meja matrix dengan  kisi geometri yang optimal untuk hasil nesting yang sempurna
keamanan operasional yang optimal dijamin oleh sistem keamanan saklar Limit (Cord sistem)
didesain khusus untuk melengkapi satu sama lain: Mesin dan peranti lunak/software dari pemasok tunggal!
Format4 Woodflash control: program kreasi sederhana, beragam kemungkinan untuk otomatisasi dan level keamanan tertinggi dikarenakan kontrol program yang konstan
koneksi kode batang/barcode untuk jaringan antar workshop

FORMAT4 Sebuah keahlian tanpa kompromi untuk pencapaian tertinggi

Merek premium Felder Group sudah memenuhi standar tertinggi para pengguna profesional  sejak 2001 Solusi modifikasi dengan performa terbaik yang tidak kenal kompromi, inovatif, menawarkan kenyamanan maksimal dalam pengoperasian dan melengkapi produktifitas.

The most important highlights at a glance

8914-spindel.png
8916-sauger.png
64712-automatisierungsloesungen.png

... FORMAT4 mesin premium untuk keperluan premium

36423-8898-144268-cnc-profith082131-format4-feldergroup.png
  • solusi mesin yang dibuat sesuai keuangan anda
  • performa tinggi yang konstan dalam pengoperasion dunia industri secara terus menerus
  • solusi produksi yang dioptimalkan sesuai dengan kustomer tertentu
  • design yang kuat dengan komponen premium
  • Banyak variasi dari paket yang spesifik dengan solusi berteknologi tinggi 
  • Presisi keahliaan keteknikan yang lengkap
  • kenyamanan pengguna premium
  • Desain pemenang penghargaan
  • Kualitas dan Ketelitian dari Austria
  • Produktifitas tanpa kompromi
  • Paket pelayanan yang sempurna - sebelum, selama dan sesudah pembelian 
  • Solusi otomatisasi
  • Workshop/bengkel yang berkaitan 
  • Peranti lunak dan mesin-mesin dari pemasok tunggal

Details

The dual side driven gantry on the profit H08 classic guarantees maximum precision and repeatability.
The rack and pinion drive in the X and Y direction ensures for maximum traverse speeds for the shortest processing times and tool changing times.

1833-gantry-antrieb.png
Heavily dusted materials can increase the amount of maintenance required on your CNC machining centre massively. Additional sealant on the guiding carriage and linear guides closed off by brass caps guarantee a noticeably higher operating life, even with heavy use.
1594-zusatzabdichtung.png
The matrix table with optimised grid geometry allows the full surface support of workpieces of all designs and sizes and guarantee their exact positioning. Reference fences mounted directly to the table offer additional support when optimising off-cuts and can be optionally monitored with collision prevention sensors. Working surface areas of 2500 mm x 1250 mm x 85 mm on the H08 13:25 and 3090 mm x 1530 mm x 85 mm on the 16:31, enable simple processing of all standard panel sizes.
1590-matrixtisch.png

FORMAT4 profit H08  classic 13.25

X= 2500 mm
Y= 1250 mm
Z= 85 mm  

FORMAT4 profit H08  classic 16.31

X= 3090 mm
Y= 1530 mm
Z= 85 mm

1800-1804-1831-34946-9010-8815-8809-arbeitsfeldgroessen_2.jpg
Air-permeable materials and small-area parts can be fixed with maximum holding force. Up to 750 m³/h.
1591-vakuumsystem.png

The vacuum table of your profit H08 comes with a grid of 60 by 60 mm and 4 vacuum connections per field for even distribution of vacuum and maximum suction performance across the full nesting table. An upgrade to a grid pattern of 30 by 30 mm is available for best possible hold down effects for all sorts of shapes and sizes but especially for smaller pieces. The vacuum table is made out of phenolic resin, which has the benefit of being non-corrosive and is not affected by heat or cold (expansion and contraction). Accurate precision is guaranteed. 

8906-vakuum-rastertisch.png

Area kerja secara standar dibagi menjadi 6 (H08 13.25) atau 8 bidang vakum (H08 16.31) untuk memastikan kekuatan pegangan terbaik untuk kebanyakan ragam ukuran panel. Bidang vakum dikendalikan secara manual menggunakan tuas tangan pada bagian depan dari mesin.

8907-arbeitsfelder.png
Smart Zoning offers the quick processing of several panel formats of 3090mm x 2100mm (7"x10"), 3090mm x 1530mm (5"x10"), 2500mm x 1250mm (4"x8"). It is possible to quickly change from one panel format to another.

Kepala pengebor DH 8 dengan 8 poros vertikal. Kepala pengebor DH 12 dengan 12 poros vertikal. Kepala pengebor DH 16 dengan 4 poros horizontal dan 12 poros vertikal dan 2 motor gergaji dikendalikan menggunakan sebuah inverter sampai dengan 6,000 rpm

8909_8982-Bohrkopf_1.png

With a motor power of 10 and 12 kW and up to 24,000 rpm, the main motor is controlled using an inverter and is attached directly to the support module of the drilling head in the Z axis. Dual linear guides guarantee highly precise vertical guiding. The main motor is positioned using ground ball screws. The HSK F63 tool clamping is done automatically. The clamping of the tool is checked using sensors, which then confirm that it is safe to start the operation. The tool holder is cleaned pneumatically.

1741-spindel.png
Setting the parametres of your tools made easy: every tool length is stored in the tool database accurately to one hundredth of a millimetre.
1742-messsystem.png
8, 11 or 15 position tool changer on the side of the machine chassis 
8910-werkzeugwechsler.png
Your future field of application is not only limited to wood. Special equipment features also allow the processing of Alucobond.
1481-gravieren.png
The height-adjustable pushing unit reduces set-up times, as there is no need to adapt the height of the unit to the different material thicknesses. 
8911-Untertisch-und-Abschiebeabsaugung.png
With the automatic control of the extraction connection, the full extraction capacity is moved between the drilling head and main spindle, depending on what is being used at the time. Efficient extraction results guaranteed. With the pushing unit option a third position of the extraction connection can be controlled. This extracts the dust table from the table ensuring an optimised work process.  
8912-einsatzgesteuerter-absaugstutzen.png
The permanent availability of modern production machines is an important influencing factor for the productivity and profit of your company. Continuous, preventative maintenance ensures that your machine is always ready to be used and guarantees constant precision. With our customised maintenance packages, you profit from a long term, continuous high quality of the end product. Additional to a complete machine maintenance check, all of the electrical, pneumatical and mechanical components as well as all of the safety features will be tested. You profit then from a free Hotline Service and will receive special conditions on software, training and spare parts. Get your customised maintenance offer now and guarantee perfect results for years to come.
1595-wartungskomplettpaket.png
As well as numerous electrical components, the electrical cabinet also contains the central CNC control unit. The clear LED colour monitor keeps you informed about all of the important data relating to the program, workpieces and machine configuration. A potentiometer and USB port complete the electrical cabinet as the heart and brain of the profit H08 classic.
1832-bedienkomfort.png

With the software that has been especially developed for the machining centre, Format4 offers a reliable complete package that is of a different class. 2 different control variations are available to ensure professional CNC processing: “Compact-control” makes it possible to run ISO-codes and Woodflash programs from external software solutions in conjunction with the Format4 machining centre. “Wooflash-control” is the tried and tested Felder in-house developed software solution for simple and efficient programming. Quick program creation and high automation possibilities, a variety of nesting applications as well as barcode connection for networked workshops guarantees efficient programming and high productivity.

The dual side driven “Gantry” on the profit H08 guarantees maximum precision and repeatability.
The rack and pinion drive in the X and Y direction ensures for maximum traverse speeds for the shortest processing times and tool changing times.
1743-gantry-antrieb.png

FORMAT4 profit H08 13.25 X= 2500 mm; Y= 1250 mm; Z= 85 mm FORMAT4 profit H08 16.31 X= 3090 mm; Y= 1530 mm; Z= 85 mm

1611-arbeitsfeldgroessen.png

Kepala pengebor DH 8 dengan 8 poros vertikal. Kepala pengebor DH 12 dengan 12 poros vertikal. Kepala pengebor DH 16 dengan 4 poros horizontal dan 12 poros vertikal dan 2 motor gergaji dikendalikan menggunakan sebuah inverter sampai dengan 6,000 rpm. Mesin ini mengerjakan pengeboran vertikal.

8909_8982-Bohrkopf.png

Dengan unit bongkar otomatis untuk benda kerja yang sudah selesai, anda bisa mengambil keuntungan dari siklus pemrosesan yang lebih singkat. Hal ini akan memberikan anda produktifitas yang lebih tinggi dan produksi yang lebih banyak.

1898-automatisierung-mit-entladeeinheit.png

The operating unit of the CNC machining centre is at the same time a major component of the Format4 operating safety concept. A light sensor monitors the access to the danger area and additionally to this an emergency stop switch makes it possible to abort the program that is currently running. As well as numerous electrical components, the electrical cabinet also contains the central CNC control unit. The clear LED colour monitor keeps you informed about all of the important data relating to the program, workpieces and machine configuration. A potentiometer and USB port complete the electrical cabinet as the heart and brain of the profit H08.

1592-bedienkomfort.png

With the software that has been especially developed for the machining centre, Format4 offers a reliable complete package that is of a different class. 2 different control variations are available to ensure professional CNC processing: “Compact-control” makes it possible to run ISO-codes and Woodflash programs from external software solutions in conjunction with the Format4 machining centre. “Wooflash-control” is the tried and tested Felder in-house developed software solution for simple and efficient programming. Quick program creation and high automation possibilities, a variety of nesting applications as well as barcode connection for networked workshops guarantees efficient programming and high productivity.

1593-software.jpg

profit H08

Heavily dusted materials can increase the amount of maintenance required on your CNC machining centre massively. Additional sealant on the guiding carriage and linear guides closed off by brass caps guarantee a noticeably higher operating life, even with heavy use.
1594-zusatzabdichtung.png
The matrix table with optimised grid geometry allows the full surface support of workpieces of all designs and sizes and guarantee their exact positioning. Reference fences mounted directly to the table offer additional support when optimising off-cuts and can be optionally monitored with collision prevention sensors. Working surface areas of 2500 mm x 1250 mm x 85 mm on the H08 13:25 and 3090 mm x 1530 mm x 85 mm on the 16:31, enable simple processing of all standard panel sizes.
1590-matrixtisch.png
Air-permeable materials and small-area parts can be fixed with maximum holding force. Up to 750 m³/h.
1591-vakuumsystem.png

The vacuum table of your profit H08 comes with a grid of 60 by 60 mm and 4 vacuum connections per field for even distribution of vacuum and maximum suction performance across the full nesting table. An upgrade to a grid pattern of 30 by 30 mm is available for best possible hold down effects for all sorts of shapes and sizes but especially for smaller pieces. The vacuum table is made out of phenolic resin, which has the benefit of being non-corrosive and is not affected by heat or cold (expansion and contraction). Accurate precision is guaranteed. 

8906-vakuum-rastertisch.png

Area kerja secara standar dibagi menjadi 6 (H08 13.25) atau 8 bidang vakum (H08 16.31) untuk memastikan kekuatan pegangan terbaik untuk kebanyakan ragam ukuran panel. Bidang vakum dikendalikan secara manual menggunakan tuas tangan pada bagian depan dari mesin.

8907-arbeitsfelder.png
Smart Zoning offers the quick processing of several panel formats of 3090mm x 2100mm (7"x10"), 3090mm x 1530mm (5"x10"), 2500mm x 1250mm (4"x8"). It is possible to quickly change from one panel format to another.

With a motor power of 10 and 12 kW and up to 24,000 rpm, the main motor is controlled using an inverter and is attached directly to the support module of the drilling head in the Z axis. Dual linear guides guarantee highly precise vertical guiding. The main motor is positioned using ground ball screws. The HSK F63 tool clamping is done automatically. The clamping of the tool is checked using sensors, which then confirm that it is safe to start the operation. The tool holder is cleaned pneumatically.

1741-spindel.png
Setting the parametres of your tools made easy: every tool length is stored in the tool database accurately to one hundredth of a millimetre.
1742-messsystem.png
8, 11 or 15 position tool changer on the side of the machine chassis 
8910-werkzeugwechsler.png
Your future field of application is not only limited to wood. Special equipment features also allow the processing of Alucobond.
1481-gravieren.png
The height-adjustable pushing unit reduces set-up times, as there is no need to adapt the height of the unit to the different material thicknesses. 
8911-Untertisch-und-Abschiebeabsaugung.png
With the automatic control of the extraction connection, the full extraction capacity is moved between the drilling head and main spindle, depending on what is being used at the time. Efficient extraction results guaranteed. With the pushing unit option a third position of the extraction connection can be controlled. This extracts the dust table from the table ensuring an optimised work process.  
8912-einsatzgesteuerter-absaugstutzen.png
The permanent availability of modern production machines is an important influencing factor for the productivity and profit of your company. Continuous, preventative maintenance ensures that your machine is always ready to be used and guarantees constant precision. With our customised maintenance packages, you profit from a long term, continuous high quality of the end product. Additional to a complete machine maintenance check, all of the electrical, pneumatical and mechanical components as well as all of the safety features will be tested. You profit then from a free Hotline Service and will receive special conditions on software, training and spare parts. Get your customised maintenance offer now and guarantee perfect results for years to come.
1595-wartungskomplettpaket.png

Variasi

Models
profit H08
  • Keuntungan anda36

profit H08

profit H08
cnc machining centres profit h08 format4 panel plastic
  • kebutuhan tempat yang minimal/sedikit
  • Otamatisasi dengan unit bongkar
  • Smart zoning, area vakum yang bisa diberi perintah secara fleksibel
  • unit pegangan dengan posisi yang pasti 
  • Gambar = pemrograman, sistem operasi peranti lunak yang mudah digunakan
  • Peranti lunak/software “Woodflash”
  • desain kuda-kuda, drive yang tersinkronisasi, konstruksi yang solid untuk performa yang maksimal
  • sistem pengukuran panjang peralatan otomatis
  • Nesting sempurna dengan meja matrix yang terbuat dari phenolic resin
  • F4 Capture, pengenal tanda titik acuan optikal 
  • F4®Solutions siap digunakan
0

profit H08

profit H08
cnc machining centres profit h08 format4 panel plastic
  • kebutuhan tempat yang minimal/sedikit
  • Otamatisasi dengan unit bongkar
  • Smart zoning, area vakum yang bisa diberi perintah secara fleksibel
  • unit pegangan dengan posisi yang pasti 
  • Gambar = pemrograman, sistem operasi peranti lunak yang mudah digunakan
  • Peranti lunak/software “Woodflash”
  • desain kuda-kuda, drive yang tersinkronisasi, konstruksi yang solid untuk performa yang maksimal
  • sistem pengukuran panjang peralatan otomatis
  • Nesting sempurna dengan meja matrix yang terbuat dari phenolic resin
  • F4 Capture, pengenal tanda titik acuan optikal 
  • F4®Solutions siap digunakan
1
video-EkOYPmYUAKU.jpg
FORMAT4® - profit H08 - CNC machining center
video--SG7gltfjNA.jpg
FORMAT4® - profit H08 - CNC machine center
video-EkOYPmYUAKU.jpg
video--SG7gltfjNA.jpg

Layanan Konsumen dan Pemeliharaan

Anggota pemeliharaan yang dilatih secara khusus selalu ada untuk menyediakan servis ditempat khusus untuk anda Jika ada masalah darurat, anda bisa menelfon pusat panggilan untuk pertolongan langsung segera.  Hubungi konsultan atau laporkan permintaan anda secara nyaman daring pada jam kerja.
feldergroup-contact-us.png

Apakah anda punya pertanyaan?

Kami bahagian bisa menyarankan pada anda secara daring, melalui sambungan telfon ataupun secara langsung di tempat pada lebih dari 250 pusat penjualan dan layanan purna jual di seluruh dunia. 

Showrooms

FELDER GROUP Indonesia

FELDER GROUP Indonesia
Jl. Imam Bonjol 46A
50139 Semarang, Central Java
Tel.: +62 (0) 24 354 2553
Fax: +62 (0) 24 354 2553

FELDER GROUP Indonesia

FELDER GROUP Indonesia
Bellagio Mall Lantai 1 No. L2.20 Kawasan Mega Kuningan Barat Kav E4.1
Kuningan Timur Setia Budi
Jakarta Selatan 12950
Tel.: +62 (0) 24 354 2553
Fax: +62 (0) 24 354 2553