Operating panel with LCD display
The individual machine units are switched on and off from the control panel.
The most important highlights at a glance
Control panel with LCD display
Premilling unit with 2 diamond tipped spindles rotating in opposite directions
“Quick-Set-System” for quick and precise adjustment of different edging material
Corner rounding unit
Individual finishing unit options to suit the customer's requirements
Your edgebanders for efficient time management
- G 660, G 670 and G 680 – the three edgebanders from Felder for efficient time management, ensure perfect results in the processing of various different types of coiled and strip edge material up to 6 mm (optional 8 mm) in thickness.
- The top model in the professional series is the G 680. Perfect workpieces in one working process – additional to the standard specification, the high quality manufactured machine also has a premilling and corner rounding unit ensuring that the high demands of the professional woodworker are met.
Highlights:
- End cutting unit with pulling cut and 10° bevel finish
- Quick changeover: Changeable gluepot for EVA and PU glue
- Quick settings with the Felder “Quick-Set” System
- Edge thickness 0.4–6 mm (optional 8 mm)
- Workpiece height of 8–60 mm
- Always tear free edges: Premilling unit with two diamond tipped spiral cutters
- No time consuming subsequent processing thanks to the precise corner rounding unit
- Automatic feed of the coiled material from 0.4–3 mm
... Your decision for Felder, a risk-free decision
- The right machine for every budget
- Complete reliability in professional use
- Tailor made machine solutions
- High quality cast iron machine table and aggregates
- Innovative detail solutions derived from 60 years of experience – already included in the standard configuration
- First class manufacturing and finishing standards
- Intuitive application concepts
- Modern, distinct design
- Quality and precision from Austria
- Powerful and efficient
- Complete package: Comprehensive service support
- CE + GS dust certified
Setup of the panel thickness
Quick and accurate adjustment of the panel thickness.
Premilling unit
The two diamond-tipped milling heads rotate in opposing directions, ensuring a perfectly straight workpiece edge to which the edge material can be glued. The premilling unit guarantees that chipped or torn edges are a thing of the past, each and every time.
Tape feed
Depending on the requirement, coiled material 0.4 to 3.0 mm thick and strip material up to 6 mm (8 mm option) thick can be used for workpieces up to 60 mm in thickness. The guillotine scissors for cutting the coiled material are set to a maximum of 3x 64 mm. The magazine, which automatically feeds the strip material via the pin grip roller, has a holding capacity of 120 mm.
Infrared lamp
The operation controlled, high quality quartz infrared lamp warms the edge surface in front of the glue unit. This guarantees that the edging adheres to cold workpieces.
Glue roller and glue pot
The Teflon coated glue pot has a capacity of 2 kg PVA hot melt adhesive granulate (ethylene vinyl acetate copolymers). The machine is ready to operate after only 12 minutes. The fine adjustable glue roller ensures that the correct amount of hot glue is applied to the differing types of edging material. PUR (Polyurethane resin) hot melt adhesive granulate may be used in accordance with the glue manufacturer‘s processing guidelines. The gluepot can be changed in record time without the use of tools, allowing an uncomplicated glue type or colour change.
Pressure roller
The pressure rollers consists of a large cylindrical roller and two additional pressure rollers as standard. These 2 secondary pressure rollers are conical and thereby apply increased pressure on both the upper and lower surface of the edging material. The whole unit is mechanicall. This spring loaded system ensure a perfect bond between edging material and the workpiece
End trimming unit
The end trimming unit consists of two independent saw units with high frequency motors (12,000 rpm). Linear guides ensure maximum precision. The end trimming unit can be tilted manually between 0°–10°.
Multifunctional trimming unit with Felder “Quick-Set”
It is quick and easy to switch between flush trimming, radius trimming and bevelled cuts for thin edges. The newly developed setup system ensures balanced edge tolerances and prevents setup mistakes. Two independent high-frequency motors with special spindles ensure perfect milling results of any edging material. The machine is equipped with 2 mm radius knifes as standard. The machine can be equipped with 3 mm radius upon request.
Corner rounding unit
Productivity that you can't do without and no time consuming post processing of the workpieces. The Felder corner rounding unit completes the finish of the corners of the workpieces, processing edge material of 0.4-3 mm and 45 mm in height without having to reduce the feed speed (also suitable for soft forming and post forming). The solid cast iron construction, linear guides and HW-cutters with centrifugal coupling ensures maximum durability. Control of the corner rounding unit is done via the control panel.
Radius scraping unit
Fine tunes the edge radius and removes excess glue.
Glue scraping unit
The manually adjustable glue scraper ensures a perfect finish on the workpiece by removing any remaining glue residue.
Buffing unit
The buffing unit leaves a super finish on ABS and PVC edging, and removes any discolouring of the edge, noticable especially when working with dark edge material.
Details & Accessories
Operating panel with LCD display
more
Setup of the panel thickness
more
Premilling unit
more
Tape feed
more
Infrared lamp
more
Glue roller and glue pot
more
Pressure roller
more
End trimming unit
more
Multifunctional trimming unit with Felder “Quick-Set”
more
Corner rounding unit
more
Radius scraping unit
more
Glue scraping unit
more
Buffing unit
more
Equipment & Specifications
Free catalogue
The catalogue
profit H80
creator 950
Presentation catalogue
We will be more than happy to help!
