new

Edgebander G 360

edgebanders g 360 felder panel
Select model
edgebanders g 380 felder panel
G 380
Available immediately Now customizable
Book now Secure at promotional price
edgebanders g 360 felder panel
G 360
Available immediately Now customizable
Book now Secure at promotional price
edgebanders g 330 felder panel
G 330
Available immediately Now customizable
Book now Secure at promotional price
All prices excl. sales tax
edgebanders g 360 felder panel

The new edition of the Felder G 300 edgebanders in a new and modern look is now even more efficient with the changeable gluepot


With the new changeable gluepot, the flexibility and productivity of larger edgebanders can also be achieved with the Felder Series G 300 models. The quick and easy change to other adhesive colours and the use of PUR glue guarantee productive procedures and excellent edges for all areas of application.

The G 330 is the smallest edge bander with chain conveyor and with a length of 2 meters it fits in every workshop. The perfect coordination of the individual components eliminates the need for manual postprocessing.

The G 360 impresses with even more power and the proven side trimming unit: Two independent high-frequency motors with a speed of 12,000 rpm and equipped with diamond cutters enable an unprecedented edge processing quality. A whole new standard of splinter-free, industrial quality glue joints with the G 360.

The new Felder G380 edgebander, with its extended end trimming unit and radius trimming, offers the highest level of flexibility in the edgebander compact class. The individual configuration with two finishing unit spaces and extensive all-round equipment in a compact design meet the highest quality standards, while taking up minimal space.

  • Quick-Set system for quick adaptation to different material thicknesses
  • Compact design and smallest footprint
  • Unique price-performance ratio
  • Teflon-coated interchangeable glue basin for 1.2 kg adhesive granulate
  • Glue and colour change in a few seconds

FELDER. Quality and precision in a nutshell

Since 1956, a guarantee for perfect results with excellent ease of use and reliability in regular professional use. Woodworkers are always enthusiastic about the individual and solid solutions for small and mid-sized businesses.

The most important highlights at a glance

64629_Wechselleimbecken.png
1518-obererdruckbalken.png
1529-bedienpult.png

Variants

Models
Variants
  • Your benefits

G 380

Variants
edgebanders g 380 felder panel
  • Installation length: 96¼"–111⅜" (2444–2828 mm)
  • Tape thickness: 0.016"–⅛" (0.4–5 mm)
  • Workpiece thickness : ⅜"–1¾" (10–45 mm)
  • Automation: Quick-set system
  • End trimming unit with linear or radius trimming
  • Premilling unit
  • Teflon-coated changeable gluepot
0

G 360

Variants
edgebanders g 360 felder panel
  • Installation length: 96¼"–111⅜" (2444–2828 mm)
  • Tape thickness: 0.016"–⅛" (0.4–5 mm)
  • Workpiece thickness : ⅜"–1¾" (10–45 mm)
  • Automation: Quick-set system
  • End trimming unit with linear trimming
  • Premilling unit
  • Teflon-coated changeable gluepot
1

G 330

Variants
edgebanders g 330 felder panel
  • Installation length: 96¼"–111⅜" (2444–2828 mm)
  • Tape thickness: 0.016"–⅛" (0.4–5 mm)
  • Workpiece thickness : ⅜"–1¾" (10–45 mm)
  • Automation: Quick-set system
  • End trimming unit with linear trimming
  • Teflon-coated changeable gluepot
2

... Your decision for Felder, a risk-free decision

Edgebander G 360 Felder Felder Group Woodworking
  • The right machine for every budget
  • Complete reliability in professional use
  • Tailor made machine solutions
  • High quality cast iron machine table and aggregates
  • Innovative detail solutions derived from 60 years of experience  already included in the standard configuration
  • First class manufacturing and finishing standards
  • Intuitive application concepts
  • Modern, distinct design
  • Quality and precision from Austria
  • Powerful and efficient
  • Complete package: Comprehensive service support

Details

The Teflon-coated changeable gluepot can be quickly and easily replaced and holds 1.2 kg of adhesive granulate. After a heating time of approx. 12 minutes, the machine is ready for use. The micro adjustable glue roller ensures the correct dosage of the hot-melt adhesive and allows perfect matching to different edge materials.

The quick and easy change to other adhesive colours and the use of PUR glue guarantee productive procedures and excellent edges for all areas of application.

64629_Wechselleimbecken.png
The biggest advantage of the new ­multi-functional combination unit is the amount of space it saves in the machine. Adjustment of the settings from flush to bevelled finish for thin edges and also radius trimming is quick and easy. 2 mm radius tooling is included as standard.
8733-multifunktionsaggregat.png
Fine tunes the edge radius as well as removing excess glue.
1388-radienzieh&shyklingenaggregat.png
This unit removes any remaining glue residue from the panel, leaving a perfect finish requiring no extra finishing.
1517-flaechenziehklinge.png
Excellent finish for ABS and PVC material. Optional installation of spray nozzles for application of polishing spray, prior to buffing.
8714-poliereinheit.png

G 380

The individual machine units are switched on and off from the control panel.
  • Glue temperature settings
  • Automatic glue temperature decrease
  • Individual stations can be selected and disengaged
  • Counter for total meters of material used
  • Display of the maintenance intervals
  • Plain text error messages
  • Coiled materials of 0.4-3mm in thickness and solid wood edge strips of 5mm thickness can be processed in single feed with 14 to 50mm edge height. The processing of strip materials is possible in single feed. The synchronised, mechanical edge feed ensures an optimal feed of the material.
     

    59799_Kantenzufuehrung.png
    The patented height Adjustment of the upper pressure bar is carried out using a handle. The value at which it needs to be set can be read using the scale The feed height can be adjusted from 10-45 mm by means of a newly developed quick change adjustment.
    8782-obererdruckbalken.png
    Two diamond tipped shaper cutters rotating in apposing directions, ensure a precise machined edge, before the edge material is attached. With the pre-milling unit, you will obtain tear-free edges, every single time.
    8783-fuegeaggregat.png
    For the trimming of coiled material up to ⅛” (3 mm) thick.
    8799-schlagschere.png

    The pressure roller unit consists of one large roller followed by a smaller one. The purpose of the unit is to improve the glue bond between the edge and the material. The unit is mechanically spring loaded and due to the “Quick” setup system, can be adjusted exactly to the required edge thickness. The adjustable spring system provides a perfect bond betweem the panel and edge is  guaranteed.

    8785-anpresseinheit.png

    End trimming unit with high precision linear guide ensures perfect cuts. The saw blades rotate at 12.000 rpm with a 0.22 kW motor and stand guarantor for perfect cutting results of superior quality and quality for any challenge. With coiled material up to 2mm, a radius trimming can be made and thus allowing for individual application.
    The selection for flush or radius trimming is done conveniently via the control panel.
     

    59789_Kappsaegegeraet.png

    G 360

    The individual machine units are switched on and off from the control panel.
  • Glue temperature settings
  • Automatic glue temperature decrease
  • Individual stations can be selected and disengaged
  • Counter for total meters of material used
  • Display of the maintenance intervals
  • Plain text error messages
  • The patented height Adjustment of the upper pressure bar is carried out using a handle. The value at which it needs to be set can be read using the scale The feed height can be adjusted from 10-45 mm by means of a newly developed quick change adjustment.
    8782-obererdruckbalken.png
    Two diamond tipped shaper cutters rotating in apposing directions, ensure a precise machined edge, before the edge material is attached. With the pre-milling unit, you will obtain tear-free edges, every single time.
    8783-fuegeaggregat.png

    The pressure roller unit consists of one large roller followed by a smaller one. The purpose of the unit is to improve the glue bond between the edge and the material. The unit is mechanically spring loaded and due to the “Quick” setup system, can be adjusted exactly to the required edge thickness. The adjustable spring system provides a perfect bond betweem the panel and edge is  guaranteed.

    8785-anpresseinheit.png
    High precision linear guides for perfect cutting results. The saw blades rotate at 9000 rpm, guaranteeing perfect cutting results regardless of the type and thickness of the wood.
    8732-kappsaegeaggregat.png

    G 330

    The new Felder space saver! ­Professional edgebander ­requiring less than two metres when ­operational
    8764-raumwunder.png
    The individual machine units are switched on and off from the control panel.
  • Glue temperature settings
  • Automatic glue temperature decrease
  • Individual stations can be selected and disengaged
  • Counter for total meters of material used
  • Display of the maintenance intervals
  • Plain text error messages
  • 1529-bedienpult.png
    The patented height Adjustment of the upper pressure bar is carried out using a handle. The value at which it needs to be set can be read using the scale The feed height can be adjusted from 10-45 mm by means of a newly developed quick change adjustment.
    1518-obererdruckbalken.png
    The pressure roller unit consists of one large roller followed by a smaller one. The purpose of the unit is to improve the glue bond between the edge and the material. The unit is mechanically spring loaded and due to the “Quick” setup system, can be adjusted exactly to the required edge thickness. The adjustable spring system provides a perfect bond betweem the panel and edge is guarranteed.
    8731-anpresseinheit.png
    High precision linear guides for perfect cutting results. The saw blades rotate at 9000 rpm, guaranteeing perfect cutting results regardless of the type and thickness of the wood.
    8732-kappsaegeaggregat.png
    Precise work-piece feeding with chain and drive rollers in spiral formation, with no scratch traces on the work piece surface of highly graded layered materials.
    8738-werstueckkettenfoerderer.png
    video-cC4J207nB4U.jpg
    Felder® G380 Edgebander
    video-aRUM3nG3LZg.jpg
    FELDER® G330 Compact Edgebander
    video-cC4J207nB4U.jpg
    video-aRUM3nG3LZg.jpg

    Customer service & maintenance

    Specially trained service personnel are always available to provide specialised on-site service for you. If the matter is urgent you can call our hotline centre for straightforward immediate help.  Contact our consultants or report your request conveniently online around the clock.
    feldergroup-contact-us.png

    Do you have any questions?

    We are happy to advise you online, over the phone or on-site at one of our more than 270 sales and service centres worldwide. 

    Showrooms

    FELDER GROUP USA Headquarters

    FELDER GROUP USA Headquarters
    USA Headquarters | New Castle, Delaware Showroom
    2 Lukens Drive, Suite 100-400
    New Castle, DE 19720
    Tel.: 866-792-5288
    Fax: 302-322-9865

    Business Hours: Mo. – Fr. | 8am – 5pm (EST)

    FELDER GROUP USA Dallas

    FELDER GROUP USA Dallas
    South Division | Dallas, Texas Showroom
    1420 Halsey Way / Suite 100
    Carrollton, TX 75007
    Tel.: 866-792-5288

    Business Hours: Mo. – Fr. | 8am – 5pm (CST)

    FELDER GROUP USA West Sacramento

    FELDER GROUP USA West Sacramento
    West Division | West Sacramento, California Showroom
    1747 Enterprise Blvd.
    West Sacramento, CA 95691
    Tel.: 866-792-5288
    Fax: 916-375-3194

    Business Hours: Mo. – Fr. | 8am – 5pm (PST)

    FELDER GROUP USA Anaheim

    FELDER GROUP USA Anaheim
    West Division | Anaheim, California Showroom
    3531 E. Miraloma Ave., Unit 1
    Anaheim, CA 92806
    Tel.: 866-792-5288

    Business Hours: Mo. – Fr. | 8am – 5pm (PST)

    FELDER GROUP USA Denver

    FELDER GROUP USA Denver
    West Division | Denver, Colorado

    Tel.: 866-792-5288

    Business Hours: On appointment
    Show more