Saw/Shaper KF 500 professional

saw-shapers kf 500 professional felder wood panel
Select model
saw-shapers kf 500 professional felder wood panel
KF 500 professional
Available immediately Now customizable
Book now Secure at promotional price
saw-shapers kf 500 felder wood panel
KF 500
Available immediately Now customizable
Book now Secure at promotional price
All prices excl. sales tax
saw-shapers kf 500 professional felder wood panel

Felder quality with every cut

The KF 500 is an inexpensive saw for professional woodworking.­ The tiltable saw blade, precise professional rip fence, the ­patented “X-Roll” aluminium sliding table with a 10 year ­factory guarantee and the tried and tested 500 cutting unit ensure ­reliability, stability and excellent results. With the 80” (2050 mm) ­sliding table and the 43” (1100 mm) outrigger table in this professional ­package, the KF 500 is a top quality machine.

FELDER. Quality and precision in a nutshell

Since 1956, a guarantee for perfect results with excellent ease of use and reliability in regular professional use. Woodworkers are always enthusiastic about the individual and solid solutions for small and mid-sized businesses.

The most important highlights at a glance

1107-8743-9022-praezisionsfuerhungssystem_1.png
1718-mf-fraesspindelsystem.png
04dd61fb70b776385e1be9f61453cc0534079add.jpg

Variants

Models
KF 500 professional
  • Your benefits

KF 500 professional

KF 500 professional
saw-shapers kf 500 professional felder wood panel
  • Cutting length: 81" (2,050 mm)
  • Cutting width: 31"–49" (800–1250 mm)
  • Cutting height: 4" (102 mm)
  • Table opening: 7" (180 mm)
  • Spindle fence for max. tooling diameter: 9" (230 mm)
  • MF spindle shaft quick-change system (optional)
0

KF 500

KF 500 professional
saw-shapers kf 500 felder wood panel
  • Cutting length: 39¼"–81" (1,000–2,050 mm)
  • Cutting width: 31"–49" (800–1,250 mm)
  • Cutting height: 4" (102 mm)
  • Table opening: 7" (180 mm)
  • Spindle fence for max. tooling diameter: 8⅞" (220 mm)
  • MF spindle shaft quick-change system (optional)
1

... Your decision for Felder, a risk-free decision

saw/spindle moulder KF 500 Felder Felder Group woodworking
  • The right machine for every budget
  • Complete reliability in professional use
  • Tailor made machine solutions
  • High quality cast iron machine table and aggregates
  • Innovative detail solutions derived from 60 years of experience already included in the standard configuration
  • First class manufacturing and finishing standards
  • Intuitive application concepts
  • Modern, distinct design
  • Quality and precision from Austria
  • Powerful and efficient
  • Complete package: Comprehensive service support

Details

Stable and compact saw unit built to last:
  • Cutting height of 4” with a 12” (315 mm) blade
  • Double-sided support
  • Smooth tilting action 0°–45°
  • Support close to the saw blade on both sides
  • 1362-kreissaegeagreggat.png
    The Felder 500 Series saw assembly is fully compatible with dado tooling. Thanks to a removable table insert and flanges, specialized Felder dado tooling can be used.
    1102-1378-nutarbeiten.png
    Scoring Saw Blades have 2 parts and can be adjusted to the thickness of the main saw blade with a shim set. They feature square carbide teeth and posi-tive hook. The scoring saw blades rotate in the opposite direction to the main saw blade.
    8701-vorritzaggregat.png
    The continuously developed linear guiding system from Felder has been astounding woodworkers since 1990. The high quality­ ­format sliding table guiding ­technology “X-Roll” comes with a 10 year Felder warranty and offers amazing operating smoothness and is completely maintenance free. The “x” design of the position of the roller bearings ensures that they move smoothly along hardened guides.
    1107-8743-9022-praezisionsfuerhungssystem_1.png
    The single handed adjustment system ensures quick and accurate setting of the rip fence. The standard rip capacity is 31” (800 mm) or an optional 49” (1250 mm). The easy to read rip scale is perfectly integrated into the saw table. The aluminum rip fence extrusion can be slid backwards to optimize the feed of workpieces. Optional parallel cutting fence fine adjustment
    8848-parallelanschlag.png
    Stable and compact spindle unit for long lasting precision
  • Maximum tooling above the table 4” (100 mm)
  • Table opening 7” (180 mm)
  • 4 speeds 3000, 6000, 8000, 10,000 rpm
  • Smooth rearward tilt to 45°
  • Height adjustment with cast iron segment
  • An optional high speed router spindle can be ordered in place of the standard 1¼” (30 mm) bore spindle. (must be ordered prior to machine production)
    1447-hochgeschwindigkeitsfraesspindel.jpg
    Large dimensioned and designed for maximum load bearing capacity, the aluminium format sliding table “hovers” on the “X-Roll”, a highly developed guiding technology. The X shape (“X-Roll”) design of the rollers distributes the load optimally on all sides. The linear surface of the steel rollers running on the hardened and ground guiding surface guarantees unbeatable precision and smoothness. “X-Roll” will warrant you the quality and precision that you expect from your new tilting spindle shaper. Another reason to choose Felder: 10 year factory warranty to underline the reliability of “X-Roll”.
    1372-zapfenundschlitzen.png
    Without losing any settings, just a few turns of your hand allows you to swap spindles of varying diameters.
    The safety bar guides, great for “end-grain” work (optional).
    8702-sicherheitslineale.png
    The use of a power feeder ensures that standard work when moulding can be carried out cleanly and precisely.
    1697-vorschubapparat.png
    The Felder device for tilting the feeder away means the power feeder always remains on the machine and can be used at any moment without problems.
    1373-abklappvorrichtung.png
  • Easy clamping of workpieces with maximum flexibility, can be used on all panel saws and spindle moulders that have a sliding table
  • Magnetic fitting makes it easy to install and adjust
  • Safety cylinder ensures maximum work safety
  • Pressure bar function possible with every sliding table length
  • Locking height 95 mm
  • Clamp. force approx. 300 kg
  • Electronic precision! The patented double-mitre gauge from Felder allows for mitre cuts on pieces with different widths and at any angle. Easy to use: Simply enter the desired angle as well as the widths of your work pieces on the keyboard. Immediately you will receive the settings and can set the electronic double miter gauge accordingly. The fence stop on the fence can be adjusted up to 53” with the scale. Depending on set angles, the lengthcompensating vernier scale will allow you to set the exact work piece length when you do angle cuts.
    1694-egl.png

    KF 500 professional

    The outrigger table enables the user to process large, heavy work pieces. For the highest in precision and stability, four rollers guide the telescopic support arm. The telescopic crosscut fence with mounting system and ergonomically designed scale with magnifying lens on the crosscut stop guarantees precise settings and crosscuts up to 2600 mm. The crosscut fence can be positioned between 90°-45° and has one crosscut stop as standard. There is a fixed end stop position for 90°.
    1679-auslegertisch.jpg
    Accurate angle adjustments, efficient operation and calibration are all made possible by the precision mitre guide index system.
    1692-gradraster-index-system.png
    The fence allows tooling of a maximum diameter of 230 mm to be used. The fine adjustment can be set between -5 to +25 mm. The extraction of the chips is done via the integrated extraction connection.
    8506-fraesanschlag.png
    Additional to the parallel guiding of the spindle fence the MULTI-adjustment system also enables
  • The quick adjustment to the tool diameter
  • Automatic repeat setting after removal of your fence
  • Parallel adjustments of the shaper fence
  • Fence can be pre-set to a desired position
  • Measurement scale for depth of cut
  • KF 500

    The crosscut fence 51” (1300 mm) for crosscuts between +45° and –45°. The fence can be attached to the sliding table with out the use of tools. The end stop provides you with the exact 90° position. The beveled miter scale with hairline readout is visible from the operating area and thus allows exact reading of the required crosscut value. “X-Roll” table extension with P-coupling
    1363-ablaenganschlag.png
    All Felder shapers have standard equipment including a tilting shaper spindle 90°–45°. Due to the tilting shaper spindle, the range of applications and savings of tooling cost may be much higher than you have expected. Using the handwheel causes the whole shaper spindle unit to tilt to the desired angle easily and smoothly to the back.

    Technical data

    Electrical setup

    KF 500
    KF 500 professional
    002
    3x 230 V motor voltage
    S
    S
    003
    1x 230 V, motor power 4.0 HP (3.0 kW)*
    O
    O
    005
    60 Hz
    S
    S
    006
    4.0 HP (3.0 kW)*
    S
    S
    007
    5.5 HP (4.0 kW)*
    O
    O
    11
    Switch for forward and reverse run
    S
    S
    29
    Electrical equipment according to CSA rules
    O
    O
    28
    Additional emergency stop
    O
    O

    Saw and Scoring Unit

    KF 500
    KF 500 professional
    70
    Saw unit with blade tilt 90°–45°, cutting height max. 102 mm
    S
    S
    82
    Preparation for Dado tooling up to 19.5 mm in width
    O
    S
    84
    Micro adjustable rip fence
    O
    O
    74
    Mechanical scoring unit, scoring blade dia. 80 mm with main saw blade dia. 250 mm
    O
    O
    78
    800 mm rip capacity, min. transport width 800 mm
    S
    S
    76
    Cutting width 800 mm with full table, min. transport width 800 mm
    O
    O
    77
    Rip capacity 1250 mm, min. transport width 800 mm
    O
    O
    80
    Saw guard EURO II
    S
    S
    175Z
    Metric scale for rip capacity
    W
    W

    Spindle Moulder Unit and Spindle Fence

    KF 500
    KF 500 professional
    109
    Tilting spindle moulder (90°–45°), scale, speed 3000/6000/8000/10,000 rpm
    S
    S
    -
    Table opening in mm
    180
    180
    -
    Table opening in inch
    7
    7
    100
    Spindle/Moulder spindles-Ø 30 mm, usable height 100 mm
    S
    S
    101
    MF spindle system - Spindle/Moulder spindles-Ø 30 mm, usable height 100 mm
    O
    O
    102
    MF spindle system - Spindle/Moulder spindles-Ø 32 mm, usable height 100 mm
    W
    W
    103
    MF spindle system - Spindle/Moulder spindles-Ø 35 mm, usable height 100 mm
    O
    O
    104
    MF spindle system - Spindle/Moulder spindles-Ø 1¼", usable height 100 mm
    S
    S
    105
    MF spindle system - Spindle/Moulder spindles-Ø 50 mm, usable height 100 mm
    O
    O
    108
    MF spindle system - Moulder spindles with collet chuck coupler
    W
    W
    -
    Spindle moulder fence 220 for max. ­tooling diameter 220 mm, fence plates 320 mm
    S
    -
    112
    Spindle moulder fence 230 for max. ­tooling diameter 230 mm, fence plates 400 mm
    O
    S
    123
    EURO Spindle moulder guard
    S
    S
    113
    MULTI adjustment for spindle fence 230 (#112)
    O
    S
    116
    Aluminium spindle fence plates anodised
    S
    S
    117
    Spindle fence plates anodised with “safety bar guides” (#112)
    O
    O

    Sliding Tables

    KF 500
    KF 500 professional
    130
    Dimension sliding table K, cutting length 1000 mm**
    S
    -
    131
    Dimension sliding table M, cutting length 1300 mm**
    O
    -
    141
    Dimension sliding table, cutting length 1550 mm**
    O
    -
    132
    Dimension sliding table L, cutting length 2050 mm**
    O
    S
    136
    Dimension sliding table anodised
    O
    S

    Outrigger Tables and Crosscut Fences

    KF 500
    KF 500 professional
    160
    1100 mm Outrigger table for 1000–2050 mm sliding tables, Series 500
    O
    S
    161
    1300 mm Outrigger table for 1300–3200 mm sliding tables, Series 500
    O
    O
    164
    Crosscut fence 1300 mm for all sliding tables
    S
    O
    165
    Telescopic extension for crosscut fence 1300 mm to 2050 mm (#164)
    O
    O
    166
    Crosscut fence 2600 mm for outrigger table (#160/161)
    O
    S
    168
    Crosscut fence 2600 mm for outrigger table instead of crosscut fence 1300 mm (#160/161)
    O
    -
    170
    Precision mitre unit with pin locating system for outrigger table crosscut fence
    O
    O

    General

    KF 500
    KF 500 professional
    -
    Working height in inch
    35
    35
    -
    Min. transport width in inch
    31½
    31½
    -
    Extractor connection port diameter in mm on overhead saw guard
    120/50
    120/50
    -
    Extractor connection port diameter in mm on spindle moulder fence
    120
    120
    -
    Weight, lbs (with average equipment)
    900
    1060

    Important Accessories

    KF 500
    KF 500 professional
    210
    Rolling carriage (410-160)
    O
    O
    212
    Tilting bracket for power feed
    O
    O
    223
    IPPC
    S
    S

    Transport

    KF 500
    KF 500 professional
    221
    Preparation for container
    S
    S
    S ... Standard equipment O ... Option W ... Choice - ... not available

    Customer service & maintenance

    Specially trained service personnel are always available to provide specialised on-site service for you. If the matter is urgent you can call our hotline centre for straightforward immediate help.  Contact our consultants or report your request conveniently online around the clock.
    feldergroup-contact-us.png

    Do you have any questions?

    We are happy to advise you online, over the phone or on-site at one of our more than 270 sales and service centres worldwide. 

    Showrooms

    FELDER GROUP USA Headquarters

    FELDER GROUP USA Headquarters
    USA Headquarters | New Castle, Delaware Showroom
    2 Lukens Drive, Suite 100-400
    New Castle, DE 19720
    Tel.: 866-792-5288
    Fax: 302-322-9865

    Business Hours: Mo. – Fr. | 8am – 5pm (EST)

    FELDER GROUP USA Dallas

    FELDER GROUP USA Dallas
    South Division | Dallas, Texas Showroom
    1420 Halsey Way / Suite 100
    Carrollton, TX 75007
    Tel.: 866-792-5288

    Business Hours: Mo. – Fr. | 8am – 5pm (CST)

    FELDER GROUP USA West Sacramento

    FELDER GROUP USA West Sacramento
    West Division | West Sacramento, California Showroom
    1747 Enterprise Blvd.
    West Sacramento, CA 95691
    Tel.: 866-792-5288
    Fax: 916-375-3194

    Business Hours: Mo. – Fr. | 8am – 5pm (PST)

    FELDER GROUP USA Anaheim

    FELDER GROUP USA Anaheim
    West Division | Anaheim, California Showroom
    3531 E. Miraloma Ave., Unit 1
    Anaheim, CA 92806
    Tel.: 866-792-5288

    Business Hours: Mo. – Fr. | 8am – 5pm (PST)

    FELDER GROUP USA Denver

    FELDER GROUP USA Denver
    West Division | Denver, Colorado

    Tel.: 866-792-5288

    Business Hours: On appointment
    Show more