Wide Belt Sander Format4 findustry 1352
- Sanding height: ⅛"– 6 ⁶⁄₈'' (7⅞") (3–170 (200) mm)
- Sanding width: 53⅛" (1,350 mm)
- Modularly equipped with two units: cross-section unit, contact-bars-module, combination sanding unit, Superfinish-unit, sanding pad units (EP/ESC), planer cutterhead unit and various varnish packages
- Feed speed: variable 2.8-20 m/min
- Touch screen control
- Feeder table wit fixed feeding height
The planet sanding unit achieves a perfect finish, especially with crossed grains. The texturing, edging and sanding of these grains is retained, thus achieving a homogeneous superfinish of the surface. The respective, individually replaceable brushes, which are arranged like a planetary system, can be replaced separately and thus allow even more flexibility and diverse production applications.
As standard, the feed speed can be continuously adjusted from the control panel between 2.8–20 m/min. The fixed infeed table height of 900 mm guarantees simple and effortless work. Due to the consistent height, the machine can also be integrated into a processing line without any effort.
Automatic thickness measurement facilitates adjustment of the machine to the desired workpiece thickness. The workpiece is measured directly on the machine without additional measuring devices being required. The required sanding depth can be set in + or - using the adjustment wheel. This wireless option makes it possible to measure the workpiece in front of the machine. The thickness is transferred wirelessly to the machine.
With a segment width of 27 mm and innovative silicone technology, the electro-pneumatic segmented sanding shoe ensures optimum sanding results and lower compressed air consumption. The pressure of the sanding pad can be individually adjusted in increments of 0.1 bar from the machine infeed side.
The cross belt sanding aggregate which is included in the standard equipment and equipped with an electro-pneumatic sanding pad and chevron belt, is particularly suited for the processing of lacquered surfaces and high gloss production. Rough wood fibres that cross the grain are removed by the sanding belt and the subsequent wide belt then smoothes the surface. The cross sanding direction ensures that there are considerably less wood fibres and that a noticeably smoother end result is achieved.
The completely uniform pressure, levels out all oscillation marks and guarantees a homogenous sanding result. An electro-pneumatic sanding belt oscillation ensures optimal centring and smooth running. Cutting speed 3 - 22 m/s, sanding belt 150 x 5000 mm.
As an option, we are able to equip your Format4 wide belt sander with roller extension tables both on the infeed and outfeed side.
These can be added to every sanding aggregate and enable a uniform pressure on the workpiece against the feed table, which is particularly important for thin workpieces. Additionally it also reduces the minimum length of the workpiece that can be processed.
The Superfinish Unit features a sanding cushion with a felt glide coating (chevron belt). This glide belt applies an even softer sanding pressure on the workpiece and is used predominantly for the sanding of lacquered workpieces and for high-gloss materials. The completely uniform pressure, levels out all oscillation marks and guarantees a homogenous sanding result. An electro-pneumatic sanding belt oscillation ensures optimal centring and smooth running. Cutting speed 2.4 - 19 m/s, sanding belt 1370 x 2620 mm.