Your shopping basket is empty.
CNC Machining Centres
Swing unit | HSK F63
with 1 output ER 25 for holding a drilling, milling or sawing tool, max. Ø 180 mm Continue
$6,495.00
excl. sales tax , without shipping costs
$6,495.00
incl. 0% tax , without shipping costs
Description
- Maximum speed drive nmax: 15000 1/min
- Ratio i = 1:1
- Maximum torque Mtx: 20 Nm
- Maximum saw blade diameter: Ø 180 mm
- Permissible operating temperature: 85°C
- Pivoting range: 0 - 100°
- Power unit can be rotated 360° around drive axis
- Aggregate height: 114 mm
- Without collet and tools
- Important: when using the saw blade, the driving pins must be used. Otherwise there is loss of warranty
This might also be of interest to you
CNC Machining Centres
Swing unit | HSK F63
300-24-024
digital with ET interface for mounting a drilling, milling or sawing tool, max. Ø 240 mm angle adjustment and quick release fastener
continue reading$10,076.00
excl. sales tax , without shipping costs
$10,076.00
incl. 0% tax , without shipping costs
CNC Machining Centres
Swing unit | HSK F63
300-24-026
with 1 output ER 25 for holding a drilling, milling or sawing tool, digital, max. Ø 240 mm angle adjustment and quick release fastener
continue reading$10,076.00
excl. sales tax , without shipping costs
$10,076.00
incl. 0% tax , without shipping costs
CNC Machining Centres
Swing unit | HSK F63
300-24-006
with 1 output WELDON for holding a sawing tool, max. Ø 180 mm
continue reading$6,495.00
excl. sales tax , without shipping costs
$6,495.00
incl. 0% tax , without shipping costs
CNC Machining Centres
Swing unit | HSK F63
300-24-035
with 1 output WELDON for holding a sawing tool, digital, max. Ø 240 mm
continue reading$12,392.00
excl. sales tax , without shipping costs
$12,392.00
incl. 0% tax , without shipping costs