Brushing machine
structura 60.02
- Brush height: ⅛"–7⅞" (3–200 mm)
- Brush width: 25⅝" (650 mm)
- Steel brush brushing aggregate, Tynex brush brushing aggregate
- Cutting speed 1,000 rpm
Plastic & Composite Machinery
Industrial power feeder
Variofeed 4
- 4 driven rollers
- Advanced tilting head
- Infeed speed: 10–60 ft/min (3–18 m/min)
- Weight: 154 lb (70 kg)
Planer
new
D 963
- Planing width: 24¾" (630 mm)
- Cutterblock: Self-aligning blades; Silent-Power® spiral cutterblock
- Planer table length: 41½" (1,050 mm)
- Maximum depth of cut: ⅛"–⅜" (3–8 mm)
- Planing height: ⅛"–11¾" (3–300 mm)
- Feed speed: continuously adjustable 13–52 ft/min (4–16 m/min); 6.5–26 ft/min (2–8 m/min)
Clean Air Dust Extractor
High Performance Line
- Max. air flow rate: 2,942–4,708 cfm (5,000–8,000 m³/h)
- Nominal air flow rate: 65 ft/sec (20 m/sek), 2,083–4,090 cfm (3,540–6,950 m³/h)
- Vacuum: 2,500–2,680 Pa
- Filter (surface) area: 538–764 ft² (50–71 m²)
- Extraction port diameter: 9⅞"–13¾" (250–350 mm)
- Remaining dust concentration, left-over dust content: <0.1 mg/m³
Horizontal Mortiser
FD 250
- Deployment area: Mortising
- Mortising depth: 6¼" (160 mm)
- Clamping range: 5⅛" (130 mm)
- Drill length: 9⅞" (250 mm)
- Single hand lever operation
- Table size: 21⅝" x 11¾" (550 x 300 mm)
work table
FAT
- Height adjustable working table
- Dimensions (L x W): 81½" x 46⅛" (2,070 x 1,170 mm) / 47¼" x 31½" (1200 x 800 mm)
- Height: 16"–42⅜" (405–1075 mm)
- Net load capacity: 300–500 kg
- Also available with panel tilting device
Clean Air Dust Extractor
Performance Line
- Max. air flow rate: 1,118 – 2,354 cfm (4,000 m³/h)
- Nominal air flow rate: 65 ft/sec (20 m/sek), 529–1,353 cfm (900–2,300 m³/h)
- Vacuum: 2,200–2,380 Pa
- Filter (surface) area: 54–215 ft² (5–20 m²)
- Extraction port diameter: 5"–7⅞" (200 mm)
- Remaining dust concentration, left-over dust content: < 0.1 mg/m³
Industrial power feeder
F-48
- 4 driven rollers
- Advanced tilting head
- Infeed speed: 11.5/13/21.3/26.3/32.8/41/65.5/82 ft/min (3.5/4/6.5/8/10/12.5/20/25 m/min)
- Weight: 147 lb (67 kg)
Expert power feeder
Variofeed 3
- 3 driven rollers
- Advanced tilting head
- Infeed speed: 10–60 ft/min (3–18 m/min)
- Weight: 143 lb (65 kg)
Sliding Table Panel Saw
K 740 S
- Cutting length: 98⅜"–145" (2,500–3,700 mm)
- “X-Roll” sliding table, 10 year guarantee
- Cutting width: 31½"–49" (800–1,250 mm)
- Cutting height: 5½" (140 mm)
- Control system: “Power-Drive” (Optional)
Tilting Shaper
F 700 Z
- Table opening: 9" (230 mm)
- Spindle fence for max. tooling diameter: 9" (230 mm)
- Quick change system for shaper spindle, Standard
- Sliding table: 43" (1,000 mm) [81" (2,050 mm)
- Speeds: 3,500; 6,500; 8,000; 10,000 rpm
- Shaper spindle control: “Power-Drive” (Optional)
Sanding table
FST 160
- Sanding table (adjustable height)
- Dimensions (L x W): 65⅜" x 40⅛" (1,660 x 1,020 mm)
- Height: 28⅝"–40⅜" (726–1,026 mm)
- Required air volume: 1059 cfm (1,800 m³/h)