Plastic & Composite Machinery

18 Products
work table

FAT

  • Height adjustable working table
  • Dimensions (L x W): 81½" x 46⅛" (2,070 x 1,170 mm) / 47¼" x 31½" (1200 x 800 mm)
  • Height: 16"–42⅜" (405–1075 mm)
  • Net load capacity: 300–500 kg
  • Also available with panel tilting device

View details
Brushing machine

structura 60.02

  • Brush height: ⅛"–7⅞" (3–200 mm)
  • Brush width: 25⅝" (650 mm)
  • Steel brush brushing aggregate, Tynex brush brushing aggregate
  • Cutting speed 1,000 rpm

View details
Industrial power feeder

Variofeed 4

  • 4 driven rollers
  • Advanced tilting head
  • Infeed speed: 10–60 ft/min (3–18 m/min)
  • Weight: 154 lb (70 kg)

View details
Planer
new

D 963

  • Planing width: 24¾" (630 mm)
  • Cutterblock: Self-aligning blades; Silent-Power® spiral­ cutterblock
  • Planer table length: 41½" (1,050 mm)
  • Maximum depth of cut: ⅛"–⅜" (3–8 mm)
  • Planing height: ⅛"–11¾" (3–300 mm)
  • Feed speed: continuously adjustable 13–52 ft/min (4–16 m/min); 6.5–26 ft/min (2–8 m/min)

View details
Clean Air Dust Extractor

High Performance Line

  • Max. air flow rate: 2,942–4,708 cfm (5,000–8,000 m³/h)
  • Nominal air flow rate: 65 ft/sec (20 m/sek), 2,083–4,090 cfm (3,540–6,950 m³/h)
  • Vacuum: 2,500–2,680 Pa
  • Filter (surface) area: 538–764 ft² (50–71 m²)
  • Extraction port diameter: 9⅞"–13¾" (250–350 mm)
  • Remaining dust concentration, left-over dust content: <0.1 mg/m³

View details
Horizontal Mortiser

FD 250

  • Deployment area: Mortising
  • Mortising depth: 6¼" (160 mm)
  • Clamping range: 5⅛" (130 mm)
  • Drill length: 9⅞" (250 mm)
  • Single hand lever operation
  • Table size: 21⅝" x 11¾" (550 x 300 mm)

View details
Clean Air Dust Extractor

Performance Line

  • Max. air flow rate: 1,118 – 2,354 cfm (4,000 m³/h)
  • Nominal air flow rate: 65 ft/sec (20 m/sek), 529–1,353 cfm (900–2,300 m³/h)
  • Vacuum: 2,200–2,380 Pa
  • Filter (surface) area: 54–215 ft² (5–20 m²)
  • Extraction port diameter: 5"–7⅞" (200 mm)
  • Remaining dust concentration, left-over dust content: < 0.1 mg/m³

View details
Industrial power feeder

F-48

  • 4 driven rollers
  • Advanced tilting head
  • Infeed speed: 11.5/13/21.3/26.3/32.8/41/65.5/82 ft/min (3.5/4/6.5/8/10/12.5/20/25 m/min)
  • Weight: 147 lb (67 kg)

View details
Sliding Table Panel Saw
new

K 740 S

  • Cutting length: 98⅜"–145" (2,500–3,700 mm)
  • “X-Roll” sliding table, 10 year guarantee
  • Cutting width: 31½"–49" (800–1,250 mm)
  • Cutting height: 5½" (140 mm)
  • Control system: “Power-Drive” (Optional)

View details
Sanding table

FST 160

  • Sanding table (adjustable height)
  • Dimensions (L x W): 65⅜" x 40⅛" (1,660 x 1,020 mm)
  • Height: 28⅝"–40⅜" (726–1,026 mm)
  • Required air volume: 1059 cfm (1,800 m³/h)

View details
Tilting Shaper

F 700 Z

  • Table opening: 9" (230 mm)
  • Spindle fence for max. tooling diameter: 9" (230 mm)
  • Quick change system for shaper spindle, Standard
  • Sliding table: 43" (1,000 mm) [81" (2,050 mm)
  • Speeds: 3,500; 6,500; 8,000; 10,000 rpm
  • Moulder spindle control: “Power-Drive” (Optional)

View details
Expert power feeder

Variofeed 3

  • 3 driven rollers
  • Advanced tilting head
  • Infeed speed: 10–60 ft/min (3–18 m/min)
  • Weight: 143 lb (65 kg)

View details