Wide Belt Sander FW 1102 perform

Powerful motors ensure perfect sanding results. The constant power transmission onto the sanding aggregates is a significant factor in the process of producing a high quality sanding finish.

The sanding belt control system scans the belt run and activates the electronic-pneumatic sanding belt control, which oscillates the sanding belt back and forth. The belt guidance monitors the belt run and stops the sanding belt motor immediately in the event of a potential sanding belt run-out.

The sanding belt can be changed quickly and without the use of tools, ensuring easy set-up without lengthy downtimes.

Highest degree of processing safety is guaranteed when adjusting the working height: The workpiece thickness is determined by pressing the workpiece onto the lower sensor. The measuring device adjusts the passage height exactly to the material thickness, deducting the desired chip removal.

A Touch-screen control is available as an option for maximum operating comfort. The clearly structured and intuitive control panel provides maximum productivity. The machine functions that are available are shown graphically and controlled using high quality switches. The infeed thickness is clearly shown on the digital display and by using the push button can be adjusted with an accuracy of 0.1 of a millimetre.

Upon request, we can equip your Felder wide belt sander with an additional roller support, both on the infeed and outfeed side of the machine.

As an option, on the delivery side of the machine, it is possible to set up a brushing facility. Different brushes can be inserted and their task is to clean, polish or structure the workpiece surface.

The feed speed can be adjusted between 2.5 - 18 m/min. The speed can also be adjusted during the sanding process. This guarantees that the optimum speed setting for the material and sanding belt grain can be achieved.

Both frame sanding and lacquer sanding can be performed with the electro-pneumatic segmented sanding shoe. The respective segments are activated based on the application.

Pre and fine sanding in one working process

The wide belt sander can also be equipped with a vacuum table which is particularly useful for smooth, small or thinner workpieces. The vacuum is created by a high pressure fan which is coupled with the feed. The vacuum holds the workpiece through the holes in the vacuum feed belt.

Automatic thickness measurement facilitates adjustment of the machine to the desired workpiece thickness. The workpiece is measured directly on the machine without additional measuring devices being required. The required sanding depth can be set in + or - using the adjustment wheel. This wireless option makes it possible to measure the workpiece in front of the machine. The thickness is transferred wirelessly to the machine.

Highest degree of processing safety is guaranteed when adjusting the working height: The workpiece thickness is determined by pressing the workpiece onto the lower sensor. The measuring device adjusts the passage height exactly to the material thickness, deducting the desired chip removal.

Adjusting of the aggregates, the feed speed and sanding depth can be carried out quickly, simply and accurately all from the control panel. A particular highlight is the digital grain compensation which does not require the machine to be opened. Using a switch on the control panel the machine can be set to the correct sanding belt grain or set to sand using the sanding shoe.

Pre and fine sanding in one working process

Upon request, we can equip your Felder wide belt sander with an additional roller support, both on the infeed and outfeed side of the machine.

The feed speed can be adjusted between 2.5 - 10 m/min. The speed can also be adjusted during the sanding process. This guarantees that the optimum speed setting for the material and sanding belt grain can be achieved.

Sanding pad for fine sanding. The continuous, electro-pneumatic sanding shoe operates application-controlled. Graphite coating ensures a long-lasting, superior, and homogeneous sanding pattern.

As an option, on the delivery side of the machine, it is possible to set up a brushing facility. Different brushes can be inserted and their task is to clean, polish or structure the workpiece surface.

Highest degree of processing safety is guaranteed when adjusting the working height: The workpiece thickness is determined by pressing the workpiece onto the lower sensor. The measuring device adjusts the passage height exactly to the material thickness, deducting the desired chip removal.

Adjusting of the aggregates, the feed speed and sanding depth can be carried out quickly, simply and accurately all from the control panel. A particular highlight is the digital grain compensation which does not require the machine to be opened. Using a switch on the control panel the machine can be set to the correct sanding belt grain or set to sand using the sanding shoe.

Upon request, we can equip your Felder wide belt sander with an additional roller support, both on the infeed and outfeed side of the machine.

The feed speed can be adjusted between 2.5 - 10 m/min. The speed can also be adjusted during the sanding process. This guarantees that the optimum speed setting for the material and sanding belt grain can be achieved.

The combination unit with a roller diameter of 125 mm is used for the calibration of solid wood. The electro-pneumatic sanding pad presses gently and evenly onto the work piece surface and can be used for multiple materials including veneered work pieces.

Machine operators can choose between two feed speeds, 4 and 8 m/min. If necessary, the speed can also be adjusted during the sanding process.

The clearly structured and intuitive control panel provides maximum productivity. Via the main control panel you can set the worktable to the workpiece thickness, fine-adjust it in 0.1 mm increments, select the desired feed speed and start the machine. The use of contact roller or sanding pad is done via the additional control panel, which is also used for fine adjustments of the sanding pad pressure. This way, optimum sanding results can be achieved.

Consistent, electro-pneumatic sanding pad with convenient pressure control on the operator's side. The durable graphite coating ensures a perfect sanding finish.

The combination unit with a roller diameter of 90 mm is used for the calibration of solid wood. The electro-pneumatic sanding pad presses gently and evenly onto the work piece surface and can be used for multiple materials including veneered work pieces.