Edgebander G 263

The patented height adjustment of the upper pressure bar is carried out using a handle. On the large scale, you can easily read off the set measurement. The feed height can be adjusted from 10 - 45 mm by means of a newly developed quick change adjustment.

Innovative - the Felder G 263 can be quickly adjusted to the required chip removal via four predefined locking positions on the solid infeed fence (0 / 0.5 / 1 and 2 mm).

The individual machine aggregates can be switched on and off easily from the clearly laid out control panel.

• Glue temperature settings
• Automatic glue temperature reduction
• Units can be selected and disengaged
• Odometer for amount of material used
• Display of the maintenance intervals
• Plain text error messages

0.4 - 2 mm coiled material can be processed.  The synchronised, mechanical edge feed ensures an optimal feed of the material.

Two counter rotating, activation controlled premillers with diamond tipped spiral cutters ensure first class edges to which the material is to be applied. With the premilling unit you will achieve chip free edges when processing laminated material.

The activation controlled, high-quality infrared quartz heating lamp heats the edge surface before the panel reaches the glueing unit ensuring maximum process reliability of the edge adhesion, especially with cold workpieces.

The knurled glue roller ensures an even application of glue to the workpiece. The 1 kg gluepot provides sufficient glue capacity.

The two independent trimming units ensure precise pre- and end trimming at the workpiece.

The pressure unit consists of a large roller with a second post pressure roller. These 2 pressure rollers provide a better pressing of the edging material against the workpiece. The entire unit is mechanically spring loaded and can be adjusted quickly and easily using the Felder "Quick-Set" System. This ensures a perfect join between the edge material and the workpiece.

The biggest advantage of the combination unit is the considerably short machine length. Adjustment of the settings from flush to bevelled finish for thin edges and also radius trimming is quick and easy. 2 mm radius tooling is included as standard.

With a gentle pulling cut, the radius scraper removes any "chatter marks" left by the radius cutter and ensures a perfect, smooth "finish".

The light scraping function of the surface scraper knives removes all glue residue from the glue joint on the workpiece surface. One more step towards the perfect and completely finished workpiece.

The buffing unit is made up of two independent electric motors, which are equipped with cotton buffers. The task of the buffing unit is to clean and polish the top and bottom part of the edge. Super finish for ABS and PVC edging material.