Edgebander G 380

The Teflon-coated changeable gluepot can be quickly and easily replaced and holds 1.2 kg of adhesive granulate. After a heating time of approx. 12 minutes, the machine is ready for use. The micro adjustable glue roller ensures the correct dosage of the hot-melt adhesive and allows perfect matching to different edge materials.

The quick and easy change to other adhesive colours and the use of PUR glue guarantee productive procedures and excellent edges for all areas of application.

The biggest advantage of the new multi-functional combination unit is the amount of space it saves in the machine. Adjustment of the settings from flush to bevelled finish for thin edges and also radius trimming is quick and easy. 2 mm radius tooling is included as standard.

Fine tunes the edge radius and removes excess glue.

This unit removes any remaining glue residue from the panel, leaving a perfect finish requiring no extra finishing.

Super finish for ABS- and PVC material. Optional installation of polishing solution spray applicator for the polishing heads.

The individual machine units are switched on and off from the control panel.

Glue temperature settings

Automatic glue temperature decrease

Units can be selected and disengaged

Odometer for total metres of material used

Display of the maintenance intervals

Plain text error messages

The patented height adjustment of the upper pressure bar is carried out using a handle. The value at which it needs to be set can be read using the scale The feed height can be adjusted from 10–45 mm by means of a newly developed quick change adjustment.

The two diamond-tipped milling heads rotate in opposing directions, ensuring a perfectly straight workpiece edge to which the edge material can be glued. The premilling unit guarantees that chipped or torn edges are a thing of the past, each and every time.

Coiled materials of 0.4-3mm in thickness and solid wood edge strips of 5mm thickness can be processed in single feed with 14 to 50mm edge height. The processing of strip materials is possible in single feed. The synchronised, mechanical edge feed ensures an optimal feed of the material.
 

To trim coiled material up to 3 mm thick.

The pressure roller unit consists of one large roller followed by a smaller one. The purpose of the unit is to improve the glue bond between the edge and the material. The unit is mechanically spring loaded and due to the “Quick” setup system, can be adjusted exactly to the required edge thickness. Due to the adjustable spring system, a perfect bond between the panel and edge is guaranteed .

End trimming unit with high precision linear guide ensures perfect cuts. The saw blades rotate at 12.000 rpm with a 0.22 kW motor and stand guarantor for perfect cutting results of superior quality and quality for any challenge. With coiled material up to 2mm, a radius trimming can be made and thus allowing for individual application.
The selection for flush or radius trimming is done conveniently via the control panel.
 

The individual machine units are switched on and off from the control panel.

Glue temperature settings

Automatic glue temperature decrease

Units can be selected and disengaged

Odometer for total metres of material used

Display of the maintenance intervals

Plain text error messages

The patented height adjustment of the upper pressure bar is carried out using a handle. The value at which it needs to be set can be read using the scale The feed height can be adjusted from 10–45 mm by means of a newly developed quick change adjustment.

The two diamond-tipped milling heads rotate in opposing directions, ensuring a perfectly straight workpiece edge to which the edge material can be glued. The premilling unit guarantees that chipped or torn edges are a thing of the past, each and every time.

The pressure roller unit consists of one large roller followed by a smaller one. The purpose of the unit is to improve the glue bond between the edge and the material. The unit is mechanically spring loaded and due to the “Quick” setup system, can be adjusted exactly to the required edge thickness. Due to the adjustable spring system, a perfect bond between the panel and edge is guaranteed .

High precision linear guides for perfect cutting results. The saw blades rotate at 9,000 rpm, guaranteeing perfect cutting results regardless of the type and thickness of the wood.

Precise work-piece feeding with chain and drive rollers in an offset formation, leaving no scratches on the workpiece surface.

The individual machine units are switched on and off from the control panel.

Glue temperature settings

Automatic glue temperature decrease

Units can be selected and disengaged

Odometer for total metres of material used

Display of the maintenance intervals

Plain text error messages

The patented height adjustment of the upper pressure bar is carried out using a handle. The value at which it needs to be set can be read using the scale The feed height can be adjusted from 10–45 mm by means of a newly developed quick change adjustment.

The pressure roller unit consists of one large roller followed by a smaller one. The purpose of the unit is to improve the glue bond between the edge and the material. The unit is mechanically spring loaded and due to the “Quick” setup system, can be adjusted exactly to the required edge thickness. Due to the adjustable spring system, a perfect bond between the panel and edge is guarranteed.

High precision linear guides for perfect cutting results. The saw blades rotate at 9,000 rpm, guaranteeing perfect cutting results regardless of the type and thickness of the wood.

The  Felder G 330 is a real space-saver that offers professional edgebanding on the smallest of footprints.