Plastic & Composite Machinery

c-tech Bandsaw FB 710 c-tech

Scope of application

Much more than just a bandsaw

The precisely milled, cast iron machine table with 700 x 840 mm can also be extended on three sides offering more support when processing large dimensioned workpieces. In conjunction with the reinforced, low vibration machine chassis, the machine table offers maximum stability. Even when working at the maximum cutting height of 460 mm you can rely on precise results. The easy to adjust tilting table, can be positioned between -5 and +45 degrees and offers numerous applications. The parallel fence can also be positioned on its side and always guarantees a high level of working safety. The 5.5 HP motor achieves a saw blade speed of 800 rpm. With the easy to mount circle cutting and sanding units, the new Felder bandsaw really is a versatile all-rounder and a worthwhile investment for perfection in woodworking. 

  • Designed for high burden load solid machine chassis and cast iron fly wheels and machine table 
  • Standard specification: Durability, precision and cutting smoothness with the X-Life® bandsaw blade ceramic guides 
  • Easy and convenient bandsaw blade quick change 

Variable cutting speed and flexible lubricant application

The new FB 710 c-tech was developed specifically for machining plastics, non-ferrous metals and composite materials, and impresses with its top performance in a wide range of applications Regardless of whether they are being used for the cutting of models and styling block materials such as UREOL®, PURENIT®, SikaBlock®, RAKU-TOOL® or for the trimming of the clamping edge after the thermoforming process. Felder bandsaws offer high performance when processing synthetic materials.

FELDER. Quality and precision in a nutshell

Since 1956, a guarantee for perfect results with excellent ease of use and reliability in regular professional use. Woodworkers are always enthusiastic about the individual and solid solutions for small and mid-sized businesses.

The most important highlights at a glance

8736_8740-tischschwenkung_1.png
1753-bandsaegeblattfuehrung.png
8781-tischverlaengerung.png

Specially designed for plastics, non-ferrous metals and composite materials: The new FELDER FB 710 c-tech - so much more than a simple bandsaw

64657-bandsaege-fb710ctech-felder-feldergroup-holzbearbeitung.png

The new FB 710 c-tech was developed specifically for machining plastics, non-ferrous metals and composite materials, and impresses with its top performance in a wide range of applications Regardless of whether they are being used for the cutting of models and styling block materials such as UREOL®, PURENIT®, SikaBlock®, RAKU-TOOL® or for the trimming of the clamping edge after the thermoforming process. Felder bandsaws offer high performance when processing synthetic materials.

With its 7.5 HP motor power and 460 mm cutting height, the FB 710 c-tech is one of the strongest and largest Felder bandsaws of its class to date. In combination with the innovative X-life ceramic guides included as standard, the bandsaw is unmatched in terms of wear resistance and blade stability.

Variable cutting speed and flexible lubricant application
The continuously adjustable speed control allows individual adaptation to the materials to be cut. Using the push buttons, the cutting speed can be adjusted flexibly in increments of fifty from 400 to 1400 m/min. The lubricant application ensures excellent cuts when processing non-ferrous metals. The lubricant tank can be attached flexibly to the machine by magnet.

Long lasting precision through X-Life ceramic guides
Ceramic guides guarantee excellent cutting results and maximum blade stability with four guiding blocks positioned directly adjacent to the saw blade. The smooth surface results in much less friction resistance. With reduced friction and less heat generation, ceramic guides are practically wear-resistant and enable an extremely long useable life and consistent cutting quality when compared to conventional roller guides.

Details

The lubricant application ensures excellent cuts when processing non-ferrous metals. The lubricant tank can be attached flexibly to the machine by magnet.

The continuously adjustable speed control allows individual adaptation to the materials to be cut. Using the push buttons, the cutting speed can be adjusted flexibly in increments of fifty from 400 to 1400 m/min.

Ceramic guides guarantee excellent cutting results and maximum blade stability due to four guide blocks resting direct against the saw blade. With reduced friction and low development of heat, compared with conventional roller guides, the ceramic guide offers almost unlimited freedom of wear and permits an extremely prolonged service life with consistently high cutting quality.
1753-bandsaegeblattfuehrung.png
The mitre fence is continuously adjustable between –45° and +45°. Great for mitre cuts!
The easily positioned aluminum parallel fence can be inserted to the left and right of the saw blade and easily placed on its side for flat workpieces.
974-parallelanschlag.png
The machined and polished cast iron table can be tilted from -5° to +45°.
8736_8740-tischschwenkung.png
The bandsaw is equipped as standard with the Felder-coupling system for the use of Felder table extensions. The cast iron table can be extended by up to 1000 mm in three directions.
1006-tischverlaengerung.png
With this device, you can process edges with different sanding pads (flat, round)
1758-schleifeinrichtung_1.png
Felder bandsaws are equipped with upper and lower table guides with fine adjustable side and rear rollers.
962-bandsaegeblattfuehrung.png
Table extension can be fitted on 3 sides.
8781-tischverlaengerung.png

Technology Data

Electrical setup

001
3x 400 V
S
003
3x 230 V motor voltage
W
004
50 Hz
S
005
60 Hz
W
008
7.5 HP (5.5 kW)*
S
28
Additional emergency stop
O

Band Saw Unit

-
Bandsaw blade length in mm (min-max)
5120
-
Bandsaw blade width in mm (min-max)
6–30
-
Cutting height in mm
460
-
Cutting speed in m/min
1278
-
Cutting width in mm
690
-
Fly-wheel speed (rpm)
573
-
Flywheel-Ø in mm
710
-
Running wheels without cover, cambered at 1/3, with wipers
S
16
Variable cutting speed 400 - 1400 m/min (#001)
O
30
Belt lubrication with felt wipers
O
200
X-Life bandsaw guide with ceramic
S

General

-
Dust port Ø in mm
2x 120
-
Table size in mm
700 x 840
-
Table size with fences and additional table in mm
760 x 1040
-
Tiltable table
-5°–+45°
-
Total height in mm
2270
-
Weight in kg (with average equipment)
400
-
Working height in mm
925

Important Accessories

-
Circle cutting device (01.1.300)
O
-
Lifting bar for 503-142 (500-149)
O
-
Mitre fence (423-043)
O
-
Rolling carriage without lifting bar (503-142)
O
-
Sanding unit (423-041)
O
106
HS bandsaw blade L= 5120 mm, W= 6 mm, T= 4.2 mm, thickness 0.60 mm
O
110
HS bandsaw blade L= 5120 mm, W= 10 mm, T= 6.0 mm, thickness 0.60 mm
O
116
HS bandsaw blade L= 5120 mm, W= 16 mm, T= 8.0 mm, thickness 0.60 mm
O
120
HS bandsaw blade L= 5120 mm, W= 20 mm, T= 8.0 mm, thickness 0.70 mm
O
125
HS bandsaw blade L= 5120 mm, W= 25 mm, T= 9.0 mm, thickness 0.90 mm
O
130
HS bandsaw blade L= 5120 mm, W= 30 mm, T= 9.0 mm, thickness 0.90 mm
O
135
Blade with convex teeth, length 5104 mm, width 20mm, thickness 0.45mm, for FB 710 c-tech
O
140
Blade with concave teeth, length 5104 mm, width 20mm, thickness 0.45mm, for FB 710 c-tech
O
145
Saw blade M42 bimetal, length 5104 mm, width 20mm, thickness 0.90mm, 1-0 TPI for FB 710 c-tech
O
213
Rolling carriage for Felder bandsaws (400-750)
O

Transport

221
Preparation for container FB
O
S ... Standard equipment O ... Option W ... Choice - ... not available

Customer service & maintenance

Specially trained service personnel are always available to provide specialised on-site service for you. If the matter is urgent you can call our hotline centre for straightforward immediate help.  Contact our consultants or report your request conveniently online around the clock.
feldergroup-contact-us.png

Do you have any questions?

We are happy to advise you online, over the phone or on-site at one of our more than 270 sales and service centres worldwide. 

Showrooms

FELDER GROUP Indonesia

FELDER GROUP Indonesia
Jl. Imam Bonjol 46A
50139 Semarang, Central Java
Tel.: +62 (0) 24 354 2553
Fax: +62 (0) 24 354 2553

FELDER GROUP Indonesia

FELDER GROUP Indonesia
Bellagio Mall Lantai 1 No. L2.20 Kawasan Mega Kuningan Barat Kav E4.1
Kuningan Timur Setia Budi
Jakarta Selatan 12950
Tel.: +62 (0) 24 354 2553
Fax: +62 (0) 24 354 2553