Bandsaw
FB 940 RS
- Cutting height: 550 mm
- Rip capacity: 910 mm
- Fly wheel dia.: 940 mm
- Table size: 860 x 1100 mm
- Cutting speed: 1950 m/min
Dust Extractor Stand
AF 22 S | Ø 120 + 80 mm
- Max. air flow rate: 3100 m³/h
- Vacuum: 2510 Pa
- Quick change chip collector system
- Stationary
- Extraction port diameter: 120/80 mm
- Chip bag capacity: 2x 200 litres
Bandsaw
FB 740 RS
- Cutting height: 450 mm
- Rip capacity: 710 mm
- Fly wheel dia.: 740 mm
- Table size: 860 x 1100 mm
- Cutting speed: 1740 m/min
Vertical panel saw
new
KV 925
- Cutting depth 60 mm
- Cutting length: 2500 mm, 3200 mm, 4300 mm, 5300 mm
- Vertical cutting height: 1600 mm, 1900 mm, 2200 mm
- Motor power 3 kW
- LED-status display
Dust Extractor Wall fitting
AF 22 W | Ø 160 mm
- Max. air flow rate: 3100 m³/h
- Vacuum: 2510 Pa
- Quick change chip collector system
- Stationary
- Extraction port diameter: 160 mm
- Chip bag capacity: 2x 200 litres
Belt Sander
FS 722
- Sanding depth: 800 mm
- Sanding belt width: 150 mm
- Feed speed: 25 m/s (Sanding belt)
Dust Extractor Mobile
AF 22 M | Ø 120 + 80 mm
- Max. air flow rate: 3100 m³/h
- Vacuum: 2510 Pa
- Quick change chip collector system
- Mobile
- Extraction port diameter: 120/80 mm
- Chip bag capacity: 2x 200 litres
Wide Belt Sander
FW 1102 perform
- Sanding height 3–170 mm
- Sanding width: 1100 mm
- Contact roller aggregate, Fine sanding unit with segmented, electro pneumatic sanding pad, 25 mm segment width
- Feed speed: infinitely variable 2.5–18 m/min
- Vacuum Infeed Table
- 15" smartouch colour touch screen
horizontal mortiser
FD 250
- Range of application: Mortising
- Mortising depth: 160 mm
- Clamping range: 130 mm
- Mortising length: 250 mm
- Single-hand lever operation
- Table size: 550 x 300 mm
Edge sanders
new
FS 700 K
- Machining of long workpieces
- Sanding belt width 200 mm / 7 ⅞ inch
- Tiltable sanding unit
- Height and angle adjustment via handwheel
- Buffing of acrylic with polishing belt
- Storage compartment in the chassis
Edgebander
new
G 560 classic
- Quick changeover times: Exchangeable gluepot for EVA and PUR glues
- Fastest settings with the Felder „Quick-Set“ system
- Edge thickness from 0.4–5 mm
- Workpiece height 8–50 mm
- Tear-free in any case: premilling unit with two diamond-tipped spiral jointing cutters
- up to 3 finishing units for the best finish
Edgebander
new
G 580 classic
- Quick changeover times: Exchangeable gluepot for EVA and PUR glues
- Fastest settings with the Felder „Quick-Set“ system
- Edge thickness from 0.4–5 mm
- Workpiece height 8–50 mm
- Tear-free in any case: premilling unit with two diamond-tipped spiral jointing cutters
- No more time consuming post processing thanks to the corner rounding unit